kernel: bump 5.15 to 5.15.123

Manually rebased:
	bcm4908/patches-5.15/071-v6.1-0001-net-broadcom-bcm4908_enet-handle-EPROBE_DEFER-when-g.patch
	bcm53xx/patches-5.15/180-usb-xhci-add-support-for-performing-fake-doorbell.patch
	ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch[*]
	bcm27xx/patches-5.15/950-0600-xhci-quirks-add-link-TRB-quirk-for-VL805.patch
	bcm27xx/patches-5.15/950-0606-usb-xhci-add-VLI_TRB_CACHE_BUG-quirk.patch
	bcm27xx/patches-5.15/950-0717-usb-xhci-add-a-quirk-for-Superspeed-bulk-OUT-transfe.patch

Removed upstreamed:
	backport-5.15/735-v6.5-net-bgmac-postpone-turning-IRQs-off-to-avoid-SoC-han.patch[1]
	backport-5.15/817-v6.5-01-leds-trigger-netdev-Recheck-NETDEV_LED_MODE_LINKUP-o.patch[2]
	pending-5.15/143-jffs2-reduce-stack-usage-in-jffs2_build_xattr_subsys.patch[3]
	pending-5.15/160-workqueue-fix-enum-type-for-gcc-13.patch[4]
	bcm53xx/patches-5.15/036-v6.5-0003-ARM-dts-BCM5301X-Drop-clock-names-from-the-SPI-node.patch[5]
	bcm53xx/patches-5.15/036-v6.5-0015-ARM-dts-BCM5301X-fix-duplex-full-full-duplex.patch[6]
	ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch[7]
	ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch[8]

All other patches automatically rebased.

1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=02474292a44205c1eb5a03634ead155a3c9134f4
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=86b93cbfe104e99fd3d25a49748b99fb88101573
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=79b9ab357b6f5675007f4c02ff8765cbd8dc06a2
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=d528faa9e828b9fc46dfb684a2a9fd8c2e860ed8
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=5899bc4058e89d5110a23797ff94439c53b77c25
6. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=95afd2c7c7d26087730dc938709e025a303e5499
7. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=40844343a8853a08b049d50c967e2a1e28f0ece6
8. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.123&id=6ad5ded420f5d96f7c65b68135f5787a1c7e58d7

Build system: x86/64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3

Co-authored-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: John Audia <therealgraysky@proton.me>
[rebased ipq40xx/patches-5.15/902-dts-ipq4019-ap-dk04.1.patch ]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
(cherry picked from commit 8590531048f138ff719c8b317c443a6a7538a762)
[Refreshed on top of openwrt-23.05]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

5 files changed, 9 insertions, 122 deletions

diff --git a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch b/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
deleted file mode 100644
index 6a525f2c3e..0000000000
--- a/target/linux/ipq807x/patches-5.15/0048-v6.1-clk-qcom-reset-Allow-specifying-custom-reset-delay.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From 72bc31aa621e21a7c36a7da8aa6f6a77bb234e0b Mon Sep 17 00:00:00 2001
-From: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
-Date: Wed, 6 Jul 2022 15:41:29 +0200
-Subject: [PATCH] clk: qcom: reset: Allow specifying custom reset delay
-
-The amount of time required between asserting and deasserting the reset
-signal can vary depending on the involved hardware component. Sometimes
-1 us might not be enough and a larger delay is necessary to conform to
-the specifications.
-
-Usually this is worked around in the consuming drivers, by replacing
-reset_control_reset() with a sequence of reset_control_assert(), waiting
-for a custom delay, followed by reset_control_deassert().
-
-However, in some cases the driver making use of the reset is generic and
-can be used with different reset controllers. In this case the reset
-time requirement is better handled directly by the reset controller
-driver.
-
-Make this possible by adding an "udelay" field to the qcom_reset_map
-that allows setting a different reset delay (in microseconds).
-
-Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20220706134132.3623415-4-stephan.gerhold@kernkonzept.com
----
- drivers/clk/qcom/reset.c | 4 +++-
- drivers/clk/qcom/reset.h | 1 +
- 2 files changed, 4 insertions(+), 1 deletion(-)
-
---- a/drivers/clk/qcom/reset.c
-+++ b/drivers/clk/qcom/reset.c
-@@ -13,8 +13,10 @@
- 
- static int qcom_reset(struct reset_controller_dev *rcdev, unsigned long id)
- {
-+	struct qcom_reset_controller *rst = to_qcom_reset_controller(rcdev);
-+
- 	rcdev->ops->assert(rcdev, id);
--	udelay(1);
-+	udelay(rst->reset_map[id].udelay ?: 1); /* use 1 us as default */
- 	rcdev->ops->deassert(rcdev, id);
- 	return 0;
- }
---- a/drivers/clk/qcom/reset.h
-+++ b/drivers/clk/qcom/reset.h
-@@ -11,6 +11,7 @@
- struct qcom_reset_map {
- 	unsigned int reg;
- 	u8 bit;
-+	u8 udelay;
- };
- 
- struct regmap;
diff --git a/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch b/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch
deleted file mode 100644
index e0725a6612..0000000000
--- a/target/linux/ipq807x/patches-5.15/0049-v6.2-clk-qcom-reset-support-resetting-multiple-bits.patch
+++ /dev/null
@@ -1,59 +0,0 @@
-From 813ba3e427671ba3ff35c825087b03f0ad91cf02 Mon Sep 17 00:00:00 2001
-From: Robert Marko <robimarko@gmail.com>
-Date: Mon, 7 Nov 2022 14:28:59 +0100
-Subject: [PATCH] clk: qcom: reset: support resetting multiple bits
-
-This patch adds the support for giving the complete bitmask
-in reset structure and reset operation will use this bitmask
-for all reset operations.
-
-Currently, reset structure only takes a single bit for each reset
-and then calculates the bitmask by using the BIT() macro.
-
-However, this is not sufficient anymore for newer SoC-s like IPQ8074,
-IPQ6018 and more, since their networking resets require multiple bits
-to be asserted in order to properly reset the HW block completely.
-
-So, in order to allow asserting multiple bits add "bitmask" field to
-qcom_reset_map, and then use that bitmask value if its populated in the
-driver, if its not populated, then we just default to existing behaviour
-and calculate the bitmask on the fly.
-
-Signed-off-by: Robert Marko <robimarko@gmail.com>
-Signed-off-by: Bjorn Andersson <andersson@kernel.org>
-Link: https://lore.kernel.org/r/20221107132901.489240-1-robimarko@gmail.com
----
- drivers/clk/qcom/reset.c | 4 ++--
- drivers/clk/qcom/reset.h | 1 +
- 2 files changed, 3 insertions(+), 2 deletions(-)
-
---- a/drivers/clk/qcom/reset.c
-+++ b/drivers/clk/qcom/reset.c
-@@ -30,7 +30,7 @@ qcom_reset_assert(struct reset_controlle
- 
- 	rst = to_qcom_reset_controller(rcdev);
- 	map = &rst->reset_map[id];
--	mask = BIT(map->bit);
-+	mask = map->bitmask ? map->bitmask : BIT(map->bit);
- 
- 	return regmap_update_bits(rst->regmap, map->reg, mask, mask);
- }
-@@ -44,7 +44,7 @@ qcom_reset_deassert(struct reset_control
- 
- 	rst = to_qcom_reset_controller(rcdev);
- 	map = &rst->reset_map[id];
--	mask = BIT(map->bit);
-+	mask = map->bitmask ? map->bitmask : BIT(map->bit);
- 
- 	return regmap_update_bits(rst->regmap, map->reg, mask, 0);
- }
---- a/drivers/clk/qcom/reset.h
-+++ b/drivers/clk/qcom/reset.h
-@@ -12,6 +12,7 @@ struct qcom_reset_map {
- 	unsigned int reg;
- 	u8 bit;
- 	u8 udelay;
-+	u32 bitmask;
- };
- 
- struct regmap;
diff --git a/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch
index b29512fb76..817a3c64c9 100644
--- a/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch
+++ b/target/linux/ipq807x/patches-5.15/0076-v5.16-PCI-qcom-Replace-ops-with-struct-pcie_cfg-in-pcie-ma.patch
@@ -30,7 +30,7 @@ Reviewed-by: Stephen Boyd <swboyd@chromium.org>
  struct qcom_pcie {
  	struct dw_pcie *pci;
  	void __iomem *parf;			/* DT parf */
-@@ -1467,6 +1471,38 @@ static const struct qcom_pcie_ops ops_1_
+@@ -1469,6 +1473,38 @@ static const struct qcom_pcie_ops ops_1_
  	.config_sid = qcom_pcie_config_sid_sm8250,
  };
  
@@ -69,7 +69,7 @@ Reviewed-by: Stephen Boyd <swboyd@chromium.org>
  static const struct dw_pcie_ops dw_pcie_ops = {
  	.link_up = qcom_pcie_link_up,
  	.start_link = qcom_pcie_start_link,
-@@ -1478,6 +1514,7 @@ static int qcom_pcie_probe(struct platfo
+@@ -1480,6 +1516,7 @@ static int qcom_pcie_probe(struct platfo
  	struct pcie_port *pp;
  	struct dw_pcie *pci;
  	struct qcom_pcie *pcie;
@@ -77,7 +77,7 @@ Reviewed-by: Stephen Boyd <swboyd@chromium.org>
  	int ret;
  
  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
-@@ -1499,7 +1536,13 @@ static int qcom_pcie_probe(struct platfo
+@@ -1501,7 +1538,13 @@ static int qcom_pcie_probe(struct platfo
  
  	pcie->pci = pci;
  
@@ -92,7 +92,7 @@ Reviewed-by: Stephen Boyd <swboyd@chromium.org>
  
  	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH);
  	if (IS_ERR(pcie->reset)) {
-@@ -1555,16 +1598,17 @@ err_pm_runtime_put:
+@@ -1557,16 +1600,17 @@ err_pm_runtime_put:
  }
  
  static const struct of_device_id qcom_pcie_match[] = {
diff --git a/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch
index af8ba2a4e1..6881ed6d25 100644
--- a/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch
+++ b/target/linux/ipq807x/patches-5.15/0077-v6.0-PCI-qcom-Add-IPQ60xx-support.patch
@@ -70,7 +70,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  };
  
  struct qcom_pcie;
-@@ -1280,6 +1290,112 @@ static void qcom_pcie_post_deinit_2_7_0(
+@@ -1282,6 +1292,112 @@ static void qcom_pcie_post_deinit_2_7_0(
  	clk_disable_unprepare(res->pipe_clk);
  }
  
@@ -183,7 +183,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  static int qcom_pcie_link_up(struct dw_pcie *pci)
  {
  	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
-@@ -1471,6 +1587,15 @@ static const struct qcom_pcie_ops ops_1_
+@@ -1473,6 +1589,15 @@ static const struct qcom_pcie_ops ops_1_
  	.config_sid = qcom_pcie_config_sid_sm8250,
  };
  
@@ -199,7 +199,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  static const struct qcom_pcie_cfg apq8084_cfg = {
  	.ops = &ops_1_0_0,
  };
-@@ -1503,6 +1628,10 @@ static const struct qcom_pcie_cfg sc7280
+@@ -1505,6 +1630,10 @@ static const struct qcom_pcie_cfg sc7280
  	.ops = &ops_1_9_0,
  };
  
@@ -210,7 +210,7 @@ Acked-by: Stanimir Varbanov <svarbanov@mm-sol.com>
  static const struct dw_pcie_ops dw_pcie_ops = {
  	.link_up = qcom_pcie_link_up,
  	.start_link = qcom_pcie_start_link,
-@@ -1609,6 +1738,7 @@ static const struct of_device_id qcom_pc
+@@ -1611,6 +1740,7 @@ static const struct of_device_id qcom_pc
  	{ .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg },
  	{ .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg },
  	{ .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg },
diff --git a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
index c7a7e7ab49..ae6b148210 100644
--- a/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
+++ b/target/linux/ipq807x/patches-5.15/0107-PCI-qcom-Add-support-for-IPQ8074-Gen3-port.patch
@@ -13,7 +13,7 @@ Signed-off-by: Robert Marko <robimarko@gmail.com>
 
 --- a/drivers/pci/controller/dwc/pcie-qcom.c
 +++ b/drivers/pci/controller/dwc/pcie-qcom.c
-@@ -1733,6 +1733,7 @@ static const struct of_device_id qcom_pc
+@@ -1735,6 +1735,7 @@ static const struct of_device_id qcom_pc
  	{ .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg },
  	{ .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg },
  	{ .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg },