ipq807x: Add ZyXEL NBG7815

ZyXEL NBG7815 is a premium 802.11ax "tri"-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
* RAM: 1 GB 2x Nanya NT5CC256M16ER-EK
* Storage:
        * 8MB serial flash Winbond W25Q64DW
        * 4GB eMMC flash Kingston EMMC04G-M627
* Ethernet:
        * 4x1G RJ45 ports (QCA8074A) with 1x status LED per port
        * 1x2.5G RJ45 port (QCA8081) with 1x status LED
        * 1x10G RJ45 port (AQR113C) with 1x status LED
* Switch: Qualcomm Atheros QCA8075
* WLAN:
        * 2.4GHz: Qualcomm QCN5024 4x4@40MHz 802.11b/g/n/ax 1147 Mbps PHY rate
        * 2x 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate
* Bluetooth CSR8811 using HSUART, currently unsupported
* USB: 1x USB3.0 Type-A port
* LED-s currently not supported:
        * White
        * Dark Blu
        * Amber
        * Purple
        * Purple and dark blue
        * Red
* Buttons:
        * 1x Soft reset
* Power: 12V DC Jack

Installation instructions:
* Disconnect WAN
* Reset device to factory defaults by pushing reset button 15 sec,
  LEDs should lit orange color.
* After 5-10 minutes, when the LEDs turn constant dark blue,
  put your LAN cable and connect at address 192.168.123.1 by telnet on port 23
* Login with
  NBG7815 login: root
  password: nbg7815@2019
* cd /tmp/ApplicationData
* wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin http://...
* wget https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh
* run flash_to_openwrt.sh
If you can't use wget, you can transfer the files via nc.
See https://openwrt.org/inbox/toh/zyxel/nbg7815_armor_g5 for installation details.

Bluetooth usage:
* you need at least package bluez-utils, recommended bluez-daemon
* run following commands to enable and start
  hciattach  /dev/ttyMSM1 bcsp
  hciconfig hci0 up

Many thanks to itorK for his work on this device:
https://github.com/itorK/openwrt/tree/nbg7815

Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: André Valentin <avalentin@marcant.net>

1 files changed, 445 insertions, 0 deletions

diff --git a/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts
new file mode 100644
index 0000000000..537dd52032
--- /dev/null
+++ b/target/linux/ipq807x/files/arch/arm64/boot/dts/qcom/ipq8074-nbg7815.dts
@@ -0,0 +1,445 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2022, Karol Przybylski <itor@o2.pl>
+ * Copyright (c) 2023, Andre Valentin <avalentin@marcant.net>
+ */
+
+/dts-v1/;
+
+#include "ipq8074.dtsi"
+#include "ipq8074-hk-cpu.dtsi"
+#include "ipq8074-ess.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/input/input.h>
+
+
+/ {
+	model = "Zyxel NBG7815";
+	compatible = "zyxel,nbg7815", "qcom,ipq8074";
+
+	aliases {
+		serial0 = &blsp1_uart5;
+		serial1 = &blsp1_uart3;
+		/* Alias as required by u-boot to patch MAC addresses */
+		ethernet0 = &dp1;
+		label-mac-device = &dp1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			linux,code = <KEY_RESTART>;
+			gpios = <&tlmm 54 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&tlmm {
+	mdio_pins: mdio-pins {
+		mdc {
+			pins = "gpio68";
+			function = "mdc";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		mdio {
+			pins = "gpio69";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+};
+
+
+&blsp1_uart3 {
+	status = "okay";
+};
+
+&blsp1_uart5 {
+	status = "okay";
+};
+
+&prng {
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&crypto {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "okay";
+
+	/*
+	 * Bootloader will find the NAND DT node by the compatible and
+	 * then "fixup" it by adding the partitions from the SMEM table
+	 * using the legacy bindings thus making it impossible for us
+	 * to change the partition table or utilize NVMEM for calibration.
+	 * So add a dummy partitions node that bootloader will populate
+	 * and set it as disabled so the kernel ignores it instead of
+	 * printing warnings due to the broken way bootloader adds the
+	 * partitions.
+	 */
+	partitions {
+		status = "disabled";
+	};
+
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0>;
+		compatible = "jedec,spi-nor";
+		spi-max-frequency = <50000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "0:sbl1";
+				reg = <0x0 0x50000>;
+				read-only;
+			};
+
+			partition@50000 {
+				label = "0:mibib";
+				reg = <0x50000 0x10000>;
+				read-only;
+			};
+
+			partition@60000 {
+				label = "0:bootconfig";
+				reg = <0x60000 0x20000>;
+				read-only;
+			};
+
+			partition@80000 {
+				label = "0:bootconfig1";
+				reg = <0x80000 0x20000>;
+				read-only;
+			};
+
+			partition@a0000 {
+				label = "0:qsee";
+				reg = <0xa0000 0x180000>;
+				read-only;
+			};
+
+			partition@220000 {
+				label = "0:qsee_1";
+				reg = <0x220000 0x180000>;
+				read-only;
+			};
+
+			partition@3a0000 {
+				label = "0:devcfg";
+				reg = <0x3a0000 0x10000>;
+				read-only;
+			};
+
+			partition@3b0000 {
+				label = "0:devcfg_1";
+				reg = <0x3b0000 0x10000>;
+				read-only;
+			};
+
+			partition@3c0000 {
+				label = "0:apdp";
+				reg = <0x3c0000 0x10000>;
+				read-only;
+			};
+
+			partition@3d0000 {
+				label = "0:apdp_1";
+				reg = <0x3d0000 0x10000>;
+				read-only;
+			};
+
+			partition@3e0000 {
+				label = "0:rpm";
+				reg = <0x3e0000 0x40000>;
+				read-only;
+			};
+
+			partition@420000 {
+				label = "0:rpm_1";
+				reg = <0x420000 0x40000>;
+				read-only;
+			};
+
+			partition@460000 {
+				label = "0:cdt";
+				reg = <0x460000 0x10000>;
+				read-only;
+			};
+
+			partition@470000 {
+				label = "0:cdt_1";
+				reg = <0x470000 0x10000>;
+				read-only;
+			};
+
+			partition@480000 {
+				label = "0:appsbl";
+				reg = <0x480000 0xc0000>;
+				read-only;
+			};
+
+			partition@540000 {
+				label = "0:appsbl_1";
+				reg = <0x540000 0xc0000>;
+				read-only;
+			};
+
+			partition@600000 {
+				compatible = "u-boot,env";
+				label = "0:appsblenv";
+				reg = <0x600000 0x10000>;
+
+				macaddr_lan: ethaddr {
+				};
+			};
+
+			partition@610000 {
+				label = "0:art";
+				reg = <0x610000 0x40000>;
+				read-only;
+			};
+
+			partition@650000 {
+				label = "0:ethphyfw";
+				reg = <0x650000 0x80000>;
+				read-only;
+			};
+
+			partition@6d0000 {
+				label = "0:crt";
+				reg = <0x6d0000 0x10000>;
+				read-only;
+			};
+
+			partition@6e0000 {
+				label = "dual_flag";
+				reg = <0x6e0000 0x10000>;
+			};
+
+			partition@6f0000 {
+				label = "reserved";
+				reg = <0x6f0000 0x110000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&mdio {
+	status = "okay";
+	pinctrl-0 = <&mdio_pins>;
+	pinctrl-names = "default";
+	reset-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
+
+	qca8075_1: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+
+	qca8075_2: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <1>;
+	};
+
+	qca8075_3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+
+	qca8075_4: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <3>;
+	};
+
+	qca8081: ethernet-phy@4{
+		compatible = "ethernet-phy-id004d.d101";
+		reg = <28>;
+		reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+	};
+
+	aqr113c: ethernet-phy@5 {
+		compatible = "ethernet-phy-ieee802.3-c45";
+		reg = <8>;
+		reset-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&switch {
+	status = "okay";
+
+	switch_cpu_bmp = <0x1>;
+	switch_lan_bmp = <0x3e>;
+	switch_wan_bmp = <0x40>;
+	switch_mac_mode = <0x0>;
+	switch_mac_mode1 = <0xf>;
+	switch_mac_mode2 = <0xd>;
+	bm_tick_mode = <0>;
+	tm_tick_mode = <0>;
+
+	qcom,port_phyinfo {
+		port@0 {
+			port_id = <1>;
+			phy_address = <0>;
+		};
+
+		port@1 {
+			port_id = <2>;
+			phy_address = <1>;
+		};
+
+		port@2 {
+			port_id = <3>;
+			phy_address = <2>;
+		};
+
+		port@3 {
+			port_id = <4>;
+			phy_address = <3>;
+		};
+
+		port@4 {
+			port_id = <5>;
+			phy_address = <28>;
+			port_mac_sel = "QGMAC_PORT";
+		};
+
+		port@5 {
+			port_id = <6>;
+			ethernet-phy-ieee802.3-c45;
+			phy_address = <8>;
+		};
+	};
+};
+
+&edma {
+	status = "okay";
+};
+
+&dp1 {
+	status = "okay";
+	phy-handle = <&qca8075_1>;
+	label = "lan1";
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp2 {
+	status = "okay";
+	phy-handle = <&qca8075_2>;
+	label = "lan2";
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp3 {
+	status = "okay";
+	phy-handle = <&qca8075_3>;
+	label = "lan3";
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp4 {
+	status = "okay";
+	phy-handle = <&qca8075_4>;
+	label = "lan4";
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+};
+
+&dp5 {
+	status = "okay";
+	phy-handle = <&qca8081>;
+	label = "wan";
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+	mac-address-increment = <1>;
+};
+
+&dp6_syn {
+	status = "okay";
+	phy-handle = <&aqr113c>;
+	label = "10g";
+	nvmem-cells = <&macaddr_lan>;
+	nvmem-cell-names = "mac-address-ascii";
+};
+
+&blsp1_i2c2 {
+	pinctrl-0 = <&i2c_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	tmp103@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&sdhc_1 {
+	status = "okay";
+	/* unstable, problem with the hs400 > h200 speed switch */
+	/delete-property/ mmc-hs400-1_8v;
+	mmc-hs200-1_8v;
+	mmc-ddr-1_8v;
+	vqmmc-supply = <&l11>;
+};
+
+&ssphy_0 {
+	status = "okay";
+};
+
+&qusb_phy_0 {
+	status = "okay";
+};
+
+&ssphy_1 {
+	status = "okay";
+};
+
+&qusb_phy_1 {
+	status = "okay";
+};
+
+&usb_0 {
+	status = "okay";
+};
+
+&usb_1 {
+	status = "okay";
+};
+
+&wifi {
+	status = "okay";
+
+	qcom,ath11k-calibration-variant = "Zyxel-NBG7815";
+};