diff options
| author | André Valentin <avalentin@marcant.net> | 2023-01-03 19:23:41 +0100 |
|---|---|---|
| committer | Christian Marangi <ansuelsmth@gmail.com> | 2023-01-19 13:26:15 +0100 |
| commit | 5dee5965012e788f06e4d095e8cfb73200d818cb (patch) | |
| tree | bc54f6f07ab6bb6049f9b6c82212e499f141384a /target/linux/ipq807x/base-files | |
| parent | 952c738c0fe360ae074fbf6a87d03883157bc2dd (diff) | |
| download | upstream-5dee5965012e788f06e4d095e8cfb73200d818cb.tar.gz upstream-5dee5965012e788f06e4d095e8cfb73200d818cb.tar.bz2 upstream-5dee5965012e788f06e4d095e8cfb73200d818cb.zip | |
ipq807x: Add ZyXEL NBG7815
ZyXEL NBG7815 is a premium 802.11ax "tri"-band router/AP.
Specifications:
* CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
* RAM: 1 GB 2x Nanya NT5CC256M16ER-EK
* Storage:
* 8MB serial flash Winbond W25Q64DW
* 4GB eMMC flash Kingston EMMC04G-M627
* Ethernet:
* 4x1G RJ45 ports (QCA8074A) with 1x status LED per port
* 1x2.5G RJ45 port (QCA8081) with 1x status LED
* 1x10G RJ45 port (AQR113C) with 1x status LED
* Switch: Qualcomm Atheros QCA8075
* WLAN:
* 2.4GHz: Qualcomm QCN5024 4x4@40MHz 802.11b/g/n/ax 1147 Mbps PHY rate
* 2x 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate
* Bluetooth CSR8811 using HSUART, currently unsupported
* USB: 1x USB3.0 Type-A port
* LED-s currently not supported:
* White
* Dark Blu
* Amber
* Purple
* Purple and dark blue
* Red
* Buttons:
* 1x Soft reset
* Power: 12V DC Jack
Installation instructions:
* Disconnect WAN
* Reset device to factory defaults by pushing reset button 15 sec,
LEDs should lit orange color.
* After 5-10 minutes, when the LEDs turn constant dark blue,
put your LAN cable and connect at address 192.168.123.1 by telnet on port 23
* Login with
NBG7815 login: root
password: nbg7815@2019
* cd /tmp/ApplicationData
* wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin http://...
* wget https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh
* run flash_to_openwrt.sh
If you can't use wget, you can transfer the files via nc.
See https://openwrt.org/inbox/toh/zyxel/nbg7815_armor_g5 for installation details.
Bluetooth usage:
* you need at least package bluez-utils, recommended bluez-daemon
* run following commands to enable and start
hciattach /dev/ttyMSM1 bcsp
hciconfig hci0 up
Many thanks to itorK for his work on this device:
https://github.com/itorK/openwrt/tree/nbg7815
Reviewed-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: André Valentin <avalentin@marcant.net>
Diffstat (limited to 'target/linux/ipq807x/base-files')
3 files changed, 20 insertions, 2 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network index e2bd46f095..de237e8541 100644 --- a/target/linux/ipq807x/base-files/etc/board.d/02_network +++ b/target/linux/ipq807x/base-files/etc/board.d/02_network @@ -30,6 +30,9 @@ ipq807x_setup_interfaces() xiaomi,ax9000) ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan" ;; + zyxel,nbg7815) + ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan" + ;; *) echo "Unsupported hardware. Network interfaces not initialized" ;; diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata index 974e7607aa..304d3a71b8 100644 --- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata +++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata @@ -15,7 +15,8 @@ case "$FIRMWARE" in qnap,301w|\ redmi,ax6|\ xiaomi,ax3600|\ - xiaomi,ax9000) + xiaomi,ax9000|\ + zyxel,nbg7815) caldata_extract "0:art" 0x1000 0x20000 ;; esac diff --git a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh index 63f546444f..4a6a91b5f5 100644 --- a/target/linux/ipq807x/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq807x/base-files/lib/upgrade/platform.sh @@ -1,7 +1,7 @@ PART_NAME=firmware REQUIRE_IMAGE_METADATA=1 -RAMFS_COPY_BIN='fw_printenv fw_setenv' +RAMFS_COPY_BIN='fw_printenv fw_setenv head' RAMFS_COPY_DATA='/etc/fw_env.config /var/lock/fw_printenv.lock' xiaomi_initramfs_prepare() { @@ -66,6 +66,20 @@ platform_do_upgrade() { rootfsname="rootfs" mmc_do_upgrade "$1" ;; + zyxel,nbg7815) + local config_mtdnum="$(find_mtd_index 0:bootconfig)" + [ -z "$config_mtdnum" ] && reboot + part_num="$(hexdump -e '1/1 "%01x|"' -n 1 -s 168 -C /dev/mtd$config_mtdnum | cut -f 1 -d "|" | head -n1)" + if [ "$part_num" -eq "0" ]; then + kernelname="0:HLOS" + rootfsname="rootfs" + mmc_do_upgrade "$1" + else + kernelname="0:HLOS_1" + rootfsname="rootfs_1" + mmc_do_upgrade "$1" + fi + ;; redmi,ax6|\ xiaomi,ax3600|\ xiaomi,ax9000) |