aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq807x/base-files/etc
diff options
context:
space:
mode:
authorAndré Valentin <avalentin@marcant.net>2023-01-03 19:23:41 +0100
committerChristian Marangi <ansuelsmth@gmail.com>2023-01-19 13:26:15 +0100
commit5dee5965012e788f06e4d095e8cfb73200d818cb (patch)
treebc54f6f07ab6bb6049f9b6c82212e499f141384a /target/linux/ipq807x/base-files/etc
parent952c738c0fe360ae074fbf6a87d03883157bc2dd (diff)
downloadupstream-5dee5965012e788f06e4d095e8cfb73200d818cb.tar.gz
upstream-5dee5965012e788f06e4d095e8cfb73200d818cb.tar.bz2
upstream-5dee5965012e788f06e4d095e8cfb73200d818cb.zip
ipq807x: Add ZyXEL NBG7815
ZyXEL NBG7815 is a premium 802.11ax "tri"-band router/AP. Specifications: * CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz * RAM: 1 GB 2x Nanya NT5CC256M16ER-EK * Storage: * 8MB serial flash Winbond W25Q64DW * 4GB eMMC flash Kingston EMMC04G-M627 * Ethernet: * 4x1G RJ45 ports (QCA8074A) with 1x status LED per port * 1x2.5G RJ45 port (QCA8081) with 1x status LED * 1x10G RJ45 port (AQR113C) with 1x status LED * Switch: Qualcomm Atheros QCA8075 * WLAN: * 2.4GHz: Qualcomm QCN5024 4x4@40MHz 802.11b/g/n/ax 1147 Mbps PHY rate * 2x 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate * Bluetooth CSR8811 using HSUART, currently unsupported * USB: 1x USB3.0 Type-A port * LED-s currently not supported: * White * Dark Blu * Amber * Purple * Purple and dark blue * Red * Buttons: * 1x Soft reset * Power: 12V DC Jack Installation instructions: * Disconnect WAN * Reset device to factory defaults by pushing reset button 15 sec, LEDs should lit orange color. * After 5-10 minutes, when the LEDs turn constant dark blue, put your LAN cable and connect at address 192.168.123.1 by telnet on port 23 * Login with NBG7815 login: root password: nbg7815@2019 * cd /tmp/ApplicationData * wget -O openwrt-ipq807x-generic-zyxel_nbg7815-squashfs-sysupgrade.bin http://... * wget https://github.com/itorK/nbg7815_tools/blob/main/flash_to_openwrt.sh * run flash_to_openwrt.sh If you can't use wget, you can transfer the files via nc. See https://openwrt.org/inbox/toh/zyxel/nbg7815_armor_g5 for installation details. Bluetooth usage: * you need at least package bluez-utils, recommended bluez-daemon * run following commands to enable and start hciattach /dev/ttyMSM1 bcsp hciconfig hci0 up Many thanks to itorK for his work on this device: https://github.com/itorK/openwrt/tree/nbg7815 Reviewed-by: Robert Marko <robimarko@gmail.com> Signed-off-by: André Valentin <avalentin@marcant.net>
Diffstat (limited to 'target/linux/ipq807x/base-files/etc')
-rw-r--r--target/linux/ipq807x/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata3
2 files changed, 5 insertions, 1 deletions
diff --git a/target/linux/ipq807x/base-files/etc/board.d/02_network b/target/linux/ipq807x/base-files/etc/board.d/02_network
index e2bd46f095..de237e8541 100644
--- a/target/linux/ipq807x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq807x/base-files/etc/board.d/02_network
@@ -30,6 +30,9 @@ ipq807x_setup_interfaces()
xiaomi,ax9000)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
+ zyxel,nbg7815)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4 10g" "wan"
+ ;;
*)
echo "Unsupported hardware. Network interfaces not initialized"
;;
diff --git a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
index 974e7607aa..304d3a71b8 100644
--- a/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
+++ b/target/linux/ipq807x/base-files/etc/hotplug.d/firmware/11-ath11k-caldata
@@ -15,7 +15,8 @@ case "$FIRMWARE" in
qnap,301w|\
redmi,ax6|\
xiaomi,ax3600|\
- xiaomi,ax9000)
+ xiaomi,ax9000|\
+ zyxel,nbg7815)
caldata_extract "0:art" 0x1000 0x20000
;;
esac