ipq806x: rename patches in patches-3.18

This will allow ipq806x to support multiple kernel version more easily.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44616

1 files changed, 0 insertions, 172 deletions

diff --git a/target/linux/ipq806x/patches/700-add-gmac-dts-suport.patch b/target/linux/ipq806x/patches/700-add-gmac-dts-suport.patch
deleted file mode 100644
index 89ebe66946..0000000000
--- a/target/linux/ipq806x/patches/700-add-gmac-dts-suport.patch
+++ /dev/null
@@ -1,172 +0,0 @@
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -18,8 +18,15 @@
- 		bootargs = "console=ttyMSM0,115200 root=/dev/mtdblock12 rootfstype=squashfs,jffs2";
- 	};
- 
-+	aliases {
-+		mdio-gpio0 = &mdio0;
-+	};
-+
- 	soc {
- 		pinmux@800000 {
-+			pinctrl-0 = <&mdio0_pins &rgmii2_pins>;
-+			pinctrl-names = "default";
-+
- 			i2c4_pins: i2c4_pinmux {
- 				pins = "gpio12", "gpio13";
- 				function = "gsbi4";
-@@ -34,6 +41,25 @@
- 					bias-none;
- 				};
- 			};
-+
-+			mdio0_pins: mdio0_pins {
-+				mux {
-+					pins = "gpio0", "gpio1";
-+					function = "gpio";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
-+
-+			rgmii2_pins: rgmii2_pins {
-+				mux {
-+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+					function = "rgmii2";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
- 		};
- 
- 		gsbi@16300000 {
-@@ -72,6 +98,7 @@
- 					#size-cells = <1>;
- 					spi-max-frequency = <50000000>;
- 					reg = <0>;
-+					m25p,fast-read;
- 
- 					partition@0 {
- 						label = "0:SBL1";
-@@ -148,5 +175,66 @@
- 		sata@29000000 {
- 			status = "ok";
- 		};
-+
-+		mdio0: mdio {
-+			compatible = "virtual,mdio-gpio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+
-+			phy0: ethernet-phy@0 {
-+				device_type = "ethernet-phy";
-+				reg = <0>;
-+				qca,ar8327-initvals = <
-+					0x00004 0x7600000   /* PAD0_MODE */
-+					0x00008 0x1000000   /* PAD5_MODE */
-+					0x0000c 0x80        /* PAD6_MODE */
-+					0x000e4 0xaa545     /* MAC_POWER_SEL */
-+					0x000e0 0xc74164de  /* SGMII_CTRL */
-+					0x0007c 0x4e        /* PORT0_STATUS */
-+					0x00094 0x4e        /* PORT6_STATUS */
-+				>;
-+			};
-+
-+			phy4: ethernet-phy@4 {
-+				device_type = "ethernet-phy";
-+				reg = <4>;
-+			};
-+		};
-+
-+		nss-gmac-common {
-+			reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
-+			reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
-+		};
-+
-+		gmac1: ethernet@37200000 {
-+			status = "ok";
-+			phy-mode = "rgmii";
-+			qcom,id = <1>;
-+			qcom,phy_mdio_addr = <4>;
-+			qcom,poll_required = <1>;
-+			qcom,rgmii_delay = <0>;
-+			qcom,emulation = <0>;
-+			qcom,forced_speed = <1000>;
-+			qcom,forced_duplex = <1>;
-+			qcom,socver = <0>;
-+			local-mac-address = [000000000000];
-+			mdiobus = <&mdio0>;
-+		};
-+
-+		gmac2: ethernet@37400000 {
-+			status = "ok";
-+			phy-mode = "sgmii";
-+			qcom,id = <2>;
-+			qcom,phy_mdio_addr = <0>;
-+			qcom,poll_required = <0>;
-+			qcom,rgmii_delay = <0>;
-+			qcom,emulation = <0>;
-+			qcom,forced_speed = <1000>;
-+			qcom,forced_duplex = <1>;
-+			qcom,socver = <0>;
-+			local-mac-address = [000000000000];
-+			mdiobus = <&mdio0>;
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -3,6 +3,7 @@
- #include "skeleton.dtsi"
- #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
- #include <dt-bindings/soc/qcom,gsbi.h>
-+#include <dt-bindings/interrupt-controller/arm-gic.h>
- 
- / {
- 	model = "Qualcomm IPQ8064";
-@@ -279,5 +280,42 @@
- 			#clock-cells = <1>;
- 			#reset-cells = <1>;
- 		};
-+
-+		nss-gmac-common {
-+			reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
-+			reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
-+		};
-+
-+		gmac0: ethernet@37000000 {
-+			device_type = "network";
-+			compatible = "qcom,nss-gmac";
-+			reg = <0x37000000 0x200000>;
-+			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		gmac1: ethernet@37200000 {
-+			device_type = "network";
-+			compatible = "qcom,nss-gmac";
-+			reg = <0x37200000 0x200000>;
-+			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		gmac2: ethernet@37400000 {
-+			device_type = "network";
-+			compatible = "qcom,nss-gmac";
-+			reg = <0x37400000 0x200000>;
-+			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
-+
-+		gmac3: ethernet@37600000 {
-+			device_type = "network";
-+			compatible = "qcom,nss-gmac";
-+			reg = <0x37600000 0x200000>;
-+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-+			status = "disabled";
-+		};
- 	};
- };