ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 91 deletions

diff --git a/target/linux/ipq806x/patches/0175-ARM-dts-ipq8064-Add-necessary-DT-data-for-Krait-cpuf.patch b/target/linux/ipq806x/patches/0175-ARM-dts-ipq8064-Add-necessary-DT-data-for-Krait-cpuf.patch
deleted file mode 100644
index 3fddd61424..0000000000
--- a/target/linux/ipq806x/patches/0175-ARM-dts-ipq8064-Add-necessary-DT-data-for-Krait-cpuf.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 258a3ea23ec048603debe1621c681b0cc733f236 Mon Sep 17 00:00:00 2001
-From: Stephen Boyd <sboyd@codeaurora.org>
-Date: Wed, 18 Jun 2014 16:04:37 -0700
-Subject: [PATCH 175/182] ARM: dts: ipq8064: Add necessary DT data for Krait
- cpufreq
-
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
----
- arch/arm/boot/dts/qcom-ipq8064.dtsi |   45 +++++++++++++++++++++++++++++++++++
- 1 file changed, 45 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -23,6 +23,22 @@
- 			next-level-cache = <&L2>;
- 			qcom,acc = <&acc0>;
- 			qcom,saw = <&saw0>;
-+			clocks = <&kraitcc 0>;
-+			clock-names = "cpu";
-+			operating-points = <
-+				/* kHz    ignored */
-+				1400000 1000000
-+				1200000 1000000
-+				1000000 1000000
-+				 800000 1000000
-+				 600000 1000000
-+				 384000 1000000
-+			>;
-+			clock-latency = <100000>;
-+
-+			cooling-min-state = <0>;
-+			cooling-max-state = <10>;
-+			#cooling-cells = <2>;
- 		};
- 
- 		cpu@1 {
-@@ -33,6 +49,22 @@
- 			next-level-cache = <&L2>;
- 			qcom,acc = <&acc1>;
- 			qcom,saw = <&saw1>;
-+			clocks = <&kraitcc 1>;
-+			clock-names = "cpu";
-+			operating-points = <
-+				/* kHz    ignored */
-+				1400000 1000000
-+				1200000 1000000
-+				1000000 1000000
-+				 800000 1000000
-+				 600000 1000000
-+				 384000 1000000
-+			>;
-+			clock-latency = <100000>;
-+
-+			cooling-min-state = <0>;
-+			cooling-max-state = <10>;
-+			#cooling-cells = <2>;
- 		};
- 
- 		L2: l2-cache {
-@@ -46,6 +78,11 @@
- 		interrupts = <1 10 0x304>;
- 	};
- 
-+	kraitcc: clock-controller {
-+		compatible = "qcom,krait-cc-v1";
-+		#clock-cells = <1>;
-+	};
-+
- 	reserved-memory {
- 		#address-cells = <1>;
- 		#size-cells = <1>;
-@@ -102,11 +139,19 @@
- 		acc0: clock-controller@2088000 {
- 			compatible = "qcom,kpss-acc-v1";
- 			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-+			clock-output-names = "acpu0_aux";
- 		};
- 
- 		acc1: clock-controller@2098000 {
- 			compatible = "qcom,kpss-acc-v1";
- 			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-+			clock-output-names = "acpu1_aux";
-+		};
-+
-+		l2cc: clock-controller@2011000 {
-+			compatible = "qcom,kpss-gcc";
-+			reg = <0x2011000 0x1000>;
-+			clock-output-names = "acpu_l2_aux";
- 		};
- 
- 		saw0: regulator@2089000 {