ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 65 deletions

diff --git a/target/linux/ipq806x/patches/0146-ARM-dts-qcom-Add-SATA-support-for-IPQ8064-and-AP148-.patch b/target/linux/ipq806x/patches/0146-ARM-dts-qcom-Add-SATA-support-for-IPQ8064-and-AP148-.patch
deleted file mode 100644
index da124c74d1..0000000000
--- a/target/linux/ipq806x/patches/0146-ARM-dts-qcom-Add-SATA-support-for-IPQ8064-and-AP148-.patch
+++ /dev/null
@@ -1,65 +0,0 @@
-From 6992cf3e8900d042a845eafc11e7841f32fec0a6 Mon Sep 17 00:00:00 2001
-From: Kumar Gala <galak@codeaurora.org>
-Date: Thu, 12 Jun 2014 10:56:54 -0500
-Subject: [PATCH 146/182] ARM: dts: qcom: Add SATA support for IPQ8064 and
- AP148 board
-
----
- arch/arm/boot/dts/qcom-ipq8064-ap148.dts |    8 ++++++++
- arch/arm/boot/dts/qcom-ipq8064.dtsi      |   30 ++++++++++++++++++++++++++++++
- 2 files changed, 38 insertions(+)
-
---- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-+++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -118,5 +118,13 @@
- 				  0x81000000 0 0	  0x31e00000 0 0x00100000   /* downstream I/O */
- 				  0x82000000 0 0x00000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
- 		};
-+
-+		sata-phy@1b400000 {
-+			status = "ok";
-+		};
-+
-+		sata@29000000 {
-+			status = "ok";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -339,5 +339,35 @@
- 			clock-names = "core", "iface", "phy";
- 			status = "disabled";
- 		};
-+
-+		sata_phy: sata-phy@1b400000 {
-+			compatible = "qcom,ipq806x-sata-phy";
-+			reg = <0x1b400000 0x200>;
-+
-+			clocks = <&gcc SATA_PHY_CFG_CLK>;
-+			clock-names = "cfg";
-+
-+			#phy-cells = <0>;
-+			status = "disabled";
-+		};
-+
-+		sata@29000000 {
-+			compatible = "qcom,ipq806x-ahci", "qcom,msm-ahci";
-+			reg = <0x29000000 0x180>;
-+
-+			interrupts = <0 209 0x0>;
-+
-+			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-+				 <&gcc SATA_H_CLK>,
-+				 <&gcc SATA_A_CLK>,
-+				 <&gcc SATA_RXOOB_CLK>,
-+				 <&gcc SATA_PMALIVE_CLK>;
-+			clock-names = "slave_face", "iface", "core",
-+					"rxoob", "pmalive";
-+
-+			phys = <&sata_phy>;
-+			phy-names = "sata-phy";
-+			status = "disabled";
-+		};
- 	};
- };