diff options
author | John Crispin <blogic@openwrt.org> | 2014-08-30 09:32:58 +0000 |
---|---|---|
committer | John Crispin <blogic@openwrt.org> | 2014-08-30 09:32:58 +0000 |
commit | a297ec8e13d10274155e0850228bb06c7648e541 (patch) | |
tree | a75e0d80b1664b748d679ea2e7f4797f58837703 /target/linux/ipq806x/patches/0144-phy-qcom-Add-driver-for-QCOM-IPQ806x-SATA-PHY.patch | |
parent | 9f7cb06591148e3698ac731f7b8734e4d3d21b33 (diff) | |
download | upstream-a297ec8e13d10274155e0850228bb06c7648e541.tar.gz upstream-a297ec8e13d10274155e0850228bb06c7648e541.tar.bz2 upstream-a297ec8e13d10274155e0850228bb06c7648e541.zip |
ipq806x: Add support for IPQ806x chip family
Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.
All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.
Support is currently limited to AP148 board but can be extended to other
platforms in the future.
These changes do not cover ethernet connectivity.
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42334 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ipq806x/patches/0144-phy-qcom-Add-driver-for-QCOM-IPQ806x-SATA-PHY.patch')
-rw-r--r-- | target/linux/ipq806x/patches/0144-phy-qcom-Add-driver-for-QCOM-IPQ806x-SATA-PHY.patch | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/target/linux/ipq806x/patches/0144-phy-qcom-Add-driver-for-QCOM-IPQ806x-SATA-PHY.patch b/target/linux/ipq806x/patches/0144-phy-qcom-Add-driver-for-QCOM-IPQ806x-SATA-PHY.patch new file mode 100644 index 0000000000..862be0835e --- /dev/null +++ b/target/linux/ipq806x/patches/0144-phy-qcom-Add-driver-for-QCOM-IPQ806x-SATA-PHY.patch @@ -0,0 +1,261 @@ +From 7554dfbbec255e4cd5dd4445841c28c48fd4a855 Mon Sep 17 00:00:00 2001 +From: Kumar Gala <galak@codeaurora.org> +Date: Tue, 3 Jun 2014 11:59:09 -0500 +Subject: [PATCH 144/182] phy: qcom: Add driver for QCOM IPQ806x SATA PHY + +Add a PHY driver for uses with AHCI based SATA controller driver on the +IPQ806x family of SoCs. + +Signed-off-by: Kumar Gala <galak@codeaurora.org> +--- + drivers/phy/Kconfig | 7 ++ + drivers/phy/Makefile | 1 + + drivers/phy/phy-qcom-ipq806x-sata.c | 211 +++++++++++++++++++++++++++++++++++ + 3 files changed, 219 insertions(+) + create mode 100644 drivers/phy/phy-qcom-ipq806x-sata.c + +diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig +index c7a551c..3642a65 100644 +--- a/drivers/phy/Kconfig ++++ b/drivers/phy/Kconfig +@@ -65,4 +65,11 @@ config BCM_KONA_USB2_PHY + help + Enable this to support the Broadcom Kona USB 2.0 PHY. + ++config PHY_QCOM_IPQ806X_SATA ++ tristate "Qualcomm IPQ806x SATA SerDes/PHY driver" ++ depends on ARCH_QCOM ++ depends on HAS_IOMEM ++ depends on OF ++ select GENERIC_PHY ++ + endmenu +diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile +index b57c253..74f78cc 100644 +--- a/drivers/phy/Makefile ++++ b/drivers/phy/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o + obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o + obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o + obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o ++obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o +diff --git a/drivers/phy/phy-qcom-ipq806x-sata.c b/drivers/phy/phy-qcom-ipq806x-sata.c +new file mode 100644 +index 0000000..e931aee +--- /dev/null ++++ b/drivers/phy/phy-qcom-ipq806x-sata.c +@@ -0,0 +1,211 @@ ++/* ++ * Copyright (c) 2014, The Linux Foundation. All rights reserved. ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 and ++ * only version 2 as published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ */ ++ ++#include <linux/io.h> ++#include <linux/kernel.h> ++#include <linux/module.h> ++#include <linux/of.h> ++#include <linux/of_address.h> ++#include <linux/time.h> ++#include <linux/delay.h> ++#include <linux/clk.h> ++#include <linux/slab.h> ++#include <linux/platform_device.h> ++#include <linux/phy/phy.h> ++ ++struct qcom_ipq806x_sata_phy { ++ void __iomem *mmio; ++ struct clk *cfg_clk; ++}; ++ ++#define __set(v, a, b) (((v) << (b)) & GENMASK(a, b)) ++ ++#define SATA_PHY_P0_PARAM0 0x200 ++#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(x) __set(x, 17, 12) ++#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK GENMASK(17, 12) ++#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2(x) __set(x, 11, 6) ++#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK GENMASK(11, 6) ++#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1(x) __set(x, 5, 0) ++#define SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK GENMASK(5, 0) ++ ++#define SATA_PHY_P0_PARAM1 0x204 ++#define SATA_PHY_P0_PARAM1_RESERVED_BITS31_21(x) __set(x, 31, 21) ++#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(x) __set(x, 20, 14) ++#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK GENMASK(20, 14) ++#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(x) __set(x, 13, 7) ++#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK GENMASK(13, 7) ++#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(x) __set(x, 6, 0) ++#define SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK GENMASK(6, 0) ++ ++#define SATA_PHY_P0_PARAM2 0x208 ++#define SATA_PHY_P0_PARAM2_RX_EQ(x) __set(x, 20, 18) ++#define SATA_PHY_P0_PARAM2_RX_EQ_MASK GENMASK(20, 18) ++ ++#define SATA_PHY_P0_PARAM3 0x20C ++#define SATA_PHY_SSC_EN 0x8 ++#define SATA_PHY_P0_PARAM4 0x210 ++#define SATA_PHY_REF_SSP_EN 0x2 ++#define SATA_PHY_RESET 0x1 ++ ++static inline void qcom_ipq806x_sata_delay_us(unsigned int delay) ++{ ++ /* sleep for max. 50us more to combine processor wakeups */ ++ usleep_range(delay, delay + 50); ++} ++ ++static int qcom_ipq806x_sata_phy_init(struct phy *generic_phy) ++{ ++ struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); ++ u32 reg; ++ ++ /* Setting SSC_EN to 1 */ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM3); ++ reg = reg | SATA_PHY_SSC_EN; ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM3); ++ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM0) & ++ ~(SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3_MASK | ++ SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN2_MASK | ++ SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN1_MASK); ++ reg |= SATA_PHY_P0_PARAM0_P0_TX_PREEMPH_GEN3(0xf); ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM0); ++ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM1) & ++ ~(SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3_MASK | ++ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2_MASK | ++ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1_MASK); ++ reg |= SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN3(0x55) | ++ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN2(0x55) | ++ SATA_PHY_P0_PARAM1_P0_TX_AMPLITUDE_GEN1(0x55); ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM1); ++ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM2) & ++ ~SATA_PHY_P0_PARAM2_RX_EQ_MASK; ++ reg |= SATA_PHY_P0_PARAM2_RX_EQ(0x3); ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM2); ++ ++ /* Setting PHY_RESET to 1 */ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); ++ reg = reg | SATA_PHY_RESET; ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); ++ ++ /* Setting REF_SSP_EN to 1 */ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); ++ reg = reg | SATA_PHY_REF_SSP_EN | SATA_PHY_RESET; ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); ++ mb(); ++ qcom_ipq806x_sata_delay_us(20); ++ ++ /* Clearing PHY_RESET to 0 */ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); ++ reg = reg & ~SATA_PHY_RESET; ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); ++ ++ return 0; ++} ++ ++static int qcom_ipq806x_sata_phy_exit(struct phy *generic_phy) ++{ ++ struct qcom_ipq806x_sata_phy *phy = phy_get_drvdata(generic_phy); ++ u32 reg; ++ ++ /* Setting PHY_RESET to 1 */ ++ reg = readl_relaxed(phy->mmio + SATA_PHY_P0_PARAM4); ++ reg = reg | SATA_PHY_RESET; ++ writel_relaxed(reg, phy->mmio + SATA_PHY_P0_PARAM4); ++ ++ return 0; ++} ++ ++static struct phy_ops qcom_ipq806x_sata_phy_ops = { ++ .init = qcom_ipq806x_sata_phy_init, ++ .exit = qcom_ipq806x_sata_phy_exit, ++ .owner = THIS_MODULE, ++}; ++ ++static int qcom_ipq806x_sata_phy_probe(struct platform_device *pdev) ++{ ++ struct qcom_ipq806x_sata_phy *phy; ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ struct phy_provider *phy_provider; ++ struct phy *generic_phy; ++ int ret; ++ ++ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL); ++ if (!phy) { ++ dev_err(dev, "%s: failed to allocate phy\n", __func__); ++ return -ENOMEM; ++ } ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ phy->mmio = devm_ioremap_resource(dev, res); ++ if (IS_ERR(phy->mmio)) ++ return PTR_ERR(phy->mmio); ++ ++ generic_phy = devm_phy_create(dev, &qcom_ipq806x_sata_phy_ops, NULL); ++ if (IS_ERR(generic_phy)) { ++ dev_err(dev, "%s: failed to create phy\n", __func__); ++ return PTR_ERR(generic_phy); ++ } ++ ++ phy_set_drvdata(generic_phy, phy); ++ ++ phy->cfg_clk = devm_clk_get(dev, "cfg"); ++ if (IS_ERR(phy->cfg_clk)) { ++ dev_err(dev, "Failed to get sata cfg clock\n"); ++ return PTR_ERR(phy->cfg_clk); ++ } ++ ++ ret = clk_prepare_enable(phy->cfg_clk); ++ if (ret) ++ return ret; ++ ++ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); ++ if (IS_ERR(phy_provider)) { ++ clk_disable_unprepare(phy->cfg_clk); ++ dev_err(dev, "%s: failed to register phy\n", __func__); ++ return PTR_ERR(phy_provider); ++ } ++ ++ return 0; ++} ++ ++static int qcom_ipq806x_sata_phy_remove(struct platform_device *pdev) ++{ ++ struct qcom_ipq806x_sata_phy *phy = platform_get_drvdata(pdev); ++ ++ clk_disable_unprepare(phy->cfg_clk); ++ ++ return 0; ++} ++ ++static const struct of_device_id qcom_ipq806x_sata_phy_of_match[] = { ++ { .compatible = "qcom,ipq806x-sata-phy" }, ++ { }, ++}; ++MODULE_DEVICE_TABLE(of, qcom_ipq806x_sata_phy_of_match); ++ ++static struct platform_driver qcom_ipq806x_sata_phy_driver = { ++ .probe = qcom_ipq806x_sata_phy_probe, ++ .remove = qcom_ipq806x_sata_phy_remove, ++ .driver = { ++ .name = "qcom-ipq806x-sata-phy", ++ .owner = THIS_MODULE, ++ .of_match_table = qcom_ipq806x_sata_phy_of_match, ++ } ++}; ++module_platform_driver(qcom_ipq806x_sata_phy_driver); ++ ++MODULE_DESCRIPTION("QCOM IPQ806x SATA PHY driver"); ++MODULE_LICENSE("GPL v2"); +-- +1.7.10.4 + |