ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 57 deletions

diff --git a/target/linux/ipq806x/patches/0143-ata-qcom-Add-device-tree-bindings-information.patch b/target/linux/ipq806x/patches/0143-ata-qcom-Add-device-tree-bindings-information.patch
deleted file mode 100644
index 01ca7336ee..0000000000
--- a/target/linux/ipq806x/patches/0143-ata-qcom-Add-device-tree-bindings-information.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From dd280a4cf6b826144f74d3fc4285633f1c337a1d Mon Sep 17 00:00:00 2001
-From: Kumar Gala <galak@codeaurora.org>
-Date: Thu, 12 Jun 2014 11:28:47 -0500
-Subject: [PATCH 143/182] ata: qcom: Add device tree bindings information
-
-Add device tree binding for Qualcomm AHCI SATA controller and specifically
-the sata controller on the IPQ806x family of SoCs.
-
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
----
- .../devicetree/bindings/ata/qcom-sata.txt          |   40 ++++++++++++++++++++
- 1 file changed, 40 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/ata/qcom-sata.txt
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/ata/qcom-sata.txt
-@@ -0,0 +1,40 @@
-+* Qualcomm AHCI SATA Controller
-+
-+SATA nodes are defined to describe on-chip Serial ATA controllers.
-+Each SATA controller should have its own node.
-+
-+Required properties:
-+- compatible		: compatible list, contains "qcom,msm-ahci"
-+- interrupts		: <interrupt mapping for SATA IRQ>
-+- reg			: <registers mapping>
-+- phys			: Must contain exactly one entry as specified
-+			  in phy-bindings.txt
-+- phy-names		: Must be "sata-phy"
-+
-+Required properties for "qcom,ipq806x-ahci" compatible:
-+- clocks		: Must contain an entry for each entry in clock-names.
-+- clock-names		: Shall be:
-+				"slave_iface" - Fabric port AHB clock for SATA
-+				"iface" - AHB clock
-+				"core" - core clock
-+				"rxoob" - RX out-of-band clock
-+				"pmalive" - Power Module Alive clock
-+
-+Example:
-+	sata@29000000 {
-+		compatible = "qcom,ipq806x-ahci", "qcom,msm-ahci";
-+		reg = <0x29000000 0x180>;
-+
-+		interrupts = <0 209 0x0>;
-+
-+		clocks = <&gcc SFAB_SATA_S_H_CLK>,
-+			 <&gcc SATA_H_CLK>,
-+			 <&gcc SATA_A_CLK>,
-+			 <&gcc SATA_RXOOB_CLK>,
-+			 <&gcc SATA_PMALIVE_CLK>;
-+		clock-names = "slave_iface", "iface", "core",
-+				"rxoob", "pmalive";
-+
-+		phys = <&sata_phy>;
-+		phy-names = "sata-phy";
-+	};