ipq806x: Add support for IPQ806x chip family

Patches are generated using the "format-patch" command from the
following location:
*https://www.codeaurora.org/cgit/quic/kernel/galak-msm/log/?h=apq_ipq_base
*rev=0771849495b4128cac2faf7d49c85c729fc48b20
Patches numbered 76/77/102/103 have already been integrated in 3.14.12,
so they're not in this list.

All these patches are either integrated are pending integration into
kernel.org, therefore these patches should go away once the kernel
gets upgraded to 3.16.

Support is currently limited to AP148 board but can be extended to other
platforms in the future.

These changes do not cover ethernet connectivity.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 42334

1 files changed, 93 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches/0136-ARM-ipq8064-ap148-Add-i2c-pinctrl-nodes.patch b/target/linux/ipq806x/patches/0136-ARM-ipq8064-ap148-Add-i2c-pinctrl-nodes.patch
new file mode 100644
index 0000000000..7c4757da99
--- /dev/null
+++ b/target/linux/ipq806x/patches/0136-ARM-ipq8064-ap148-Add-i2c-pinctrl-nodes.patch
@@ -0,0 +1,93 @@
+From e93b9480667cbd0e3a4276e8749279693fe239f4 Mon Sep 17 00:00:00 2001
+From: Andy Gross <agross@codeaurora.org>
+Date: Wed, 14 May 2014 22:49:03 -0500
+Subject: [PATCH 136/182] ARM: ipq8064-ap148: Add i2c pinctrl nodes
+
+Signed-off-by: Andy Gross <agross@codeaurora.org>
+---
+ arch/arm/boot/dts/qcom-ipq8064-ap148.dts |   17 +++++++++++++++++
+ arch/arm/boot/dts/qcom-ipq8064.dtsi      |   27 +++++++++++++++++++++++++++
+ 2 files changed, 44 insertions(+)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+index 100b6eb..dbb546d 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -14,12 +14,29 @@
+ 	};
+ 
+ 	soc {
++		pinmux@800000 {
++			i2c4_pins: i2c4_pinmux {
++				pins = "gpio12", "gpio13";
++				function = "gsbi4";
++				bias-disable;
++			};
++		};
++
+ 		gsbi@16300000 {
+ 			qcom,mode = <GSBI_PROT_I2C_UART>;
+ 			status = "ok";
+ 			serial@16340000 {
+ 				status = "ok";
+ 			};
++
++			i2c4: i2c@16380000 {
++				status = "ok";
++
++				clock-frequency = <200000>;
++
++				pinctrl-0 = <&i2c4_pins>;
++				pinctrl-names = "default";
++			};
+ 		};
+ 	};
+ };
+diff --git a/arch/arm/boot/dts/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+index 952afb7..b39c1ef 100644
+--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
+@@ -137,6 +137,20 @@
+ 				clock-names = "core", "iface";
+ 				status = "disabled";
+ 			};
++
++			i2c@124a0000 {
++				compatible = "qcom,i2c-qup-v1.1.1";
++				reg = <0x124a0000 0x1000>;
++				interrupts = <0 196 0>;
++
++				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
++				clock-names = "core", "iface";
++				status = "disabled";
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++			};
++
+ 		};
+ 
+ 		gsbi4: gsbi@16300000 {
+@@ -158,6 +172,19 @@
+ 				clock-names = "core", "iface";
+ 				status = "disabled";
+ 			};
++
++			i2c@16380000 {
++				compatible = "qcom,i2c-qup-v1.1.1";
++				reg = <0x16380000 0x1000>;
++				interrupts = <0 153 0>;
++
++				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
++				clock-names = "core", "iface";
++				status = "disabled";
++
++				#address-cells = <1>;
++				#size-cells = <0>;
++			};
+ 		};
+ 
+ 		qcom,ssbi@500000 {
+-- 
+1.7.10.4
+