ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 125 deletions

diff --git a/target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch b/target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch
deleted file mode 100644
index 86cce61322..0000000000
--- a/target/linux/ipq806x/patches/0135-spi-qup-Add-support-for-v1.1.1.patch
+++ /dev/null
@@ -1,125 +0,0 @@
-From 8b9de04ef3aaa154f30baf1ac703a2d3b474ad4e Mon Sep 17 00:00:00 2001
-From: Andy Gross <agross@codeaurora.org>
-Date: Thu, 12 Jun 2014 14:34:12 -0500
-Subject: [PATCH 135/182] spi: qup: Add support for v1.1.1
-
-This patch adds support for v1.1.1 of the SPI QUP controller.
-
-Signed-off-by: Andy Gross <agross@codeaurora.org>
----
- .../devicetree/bindings/spi/qcom,spi-qup.txt       |    6 +++-
- drivers/spi/spi-qup.c                              |   36 ++++++++++++--------
- 2 files changed, 27 insertions(+), 15 deletions(-)
-
---- a/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-+++ b/Documentation/devicetree/bindings/spi/qcom,spi-qup.txt
-@@ -7,7 +7,11 @@ SPI in master mode supports up to 50MHz,
- data path from 4 bits to 32 bits and numerous protocol variants.
- 
- Required properties:
--- compatible:     Should contain "qcom,spi-qup-v2.1.1" or "qcom,spi-qup-v2.2.1"
-+- compatible:     Should contain:
-+		  "qcom,spi-qup-v1.1.1" for 8660, 8960 and 8064.
-+		  "qcom,spi-qup-v2.1.1" for 8974 and later
-+		  "qcom,spi-qup-v2.2.1" for 8974 v2 and later.
-+
- - reg:            Should contain base register location and length
- - interrupts:     Interrupt number used by this controller
- 
---- a/drivers/spi/spi-qup.c
-+++ b/drivers/spi/spi-qup.c
-@@ -142,6 +142,7 @@ struct spi_qup {
- 	int			w_size;	/* bytes per SPI word */
- 	int			tx_bytes;
- 	int			rx_bytes;
-+	int			qup_v1;
- };
- 
- 
-@@ -420,7 +421,9 @@ static int spi_qup_io_config(struct spi_
- 	config |= QUP_CONFIG_SPI_MODE;
- 	writel_relaxed(config, controller->base + QUP_CONFIG);
- 
--	writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
-+	/* only write to OPERATIONAL_MASK when register is present */
-+	if (!controller->qup_v1)
-+		writel_relaxed(0, controller->base + QUP_OPERATIONAL_MASK);
- 	return 0;
- }
- 
-@@ -486,7 +489,7 @@ static int spi_qup_probe(struct platform
- 	struct resource *res;
- 	struct device *dev;
- 	void __iomem *base;
--	u32 data, max_freq, iomode;
-+	u32 max_freq, iomode;
- 	int ret, irq, size;
- 
- 	dev = &pdev->dev;
-@@ -529,15 +532,6 @@ static int spi_qup_probe(struct platform
- 		return ret;
- 	}
- 
--	data = readl_relaxed(base + QUP_HW_VERSION);
--
--	if (data < QUP_HW_VERSION_2_1_1) {
--		clk_disable_unprepare(cclk);
--		clk_disable_unprepare(iclk);
--		dev_err(dev, "v.%08x is not supported\n", data);
--		return -ENXIO;
--	}
--
- 	master = spi_alloc_master(dev, sizeof(struct spi_qup));
- 	if (!master) {
- 		clk_disable_unprepare(cclk);
-@@ -570,6 +564,10 @@ static int spi_qup_probe(struct platform
- 	controller->cclk = cclk;
- 	controller->irq = irq;
- 
-+	/* set v1 flag if device is version 1 */
-+	if (of_device_is_compatible(dev->of_node, "qcom,spi-qup-v1.1.1"))
-+		controller->qup_v1 = 1;
-+
- 	spin_lock_init(&controller->lock);
- 	init_completion(&controller->done);
- 
-@@ -593,8 +591,8 @@ static int spi_qup_probe(struct platform
- 	size = QUP_IO_M_INPUT_FIFO_SIZE(iomode);
- 	controller->in_fifo_sz = controller->in_blk_sz * (2 << size);
- 
--	dev_info(dev, "v.%08x IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
--		 data, controller->in_blk_sz, controller->in_fifo_sz,
-+	dev_info(dev, "IN:block:%d, fifo:%d, OUT:block:%d, fifo:%d\n",
-+		 controller->in_blk_sz, controller->in_fifo_sz,
- 		 controller->out_blk_sz, controller->out_fifo_sz);
- 
- 	writel_relaxed(1, base + QUP_SW_RESET);
-@@ -607,10 +605,19 @@ static int spi_qup_probe(struct platform
- 
- 	writel_relaxed(0, base + QUP_OPERATIONAL);
- 	writel_relaxed(0, base + QUP_IO_M_MODES);
--	writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
-+
-+	if (!controller->qup_v1)
-+		writel_relaxed(0, base + QUP_OPERATIONAL_MASK);
-+
- 	writel_relaxed(SPI_ERROR_CLK_UNDER_RUN | SPI_ERROR_CLK_OVER_RUN,
- 		       base + SPI_ERROR_FLAGS_EN);
- 
-+	/* if earlier version of the QUP, disable INPUT_OVERRUN */
-+	if (controller->qup_v1)
-+		writel_relaxed(QUP_ERROR_OUTPUT_OVER_RUN |
-+			QUP_ERROR_INPUT_UNDER_RUN | QUP_ERROR_OUTPUT_UNDER_RUN,
-+			base + QUP_ERROR_FLAGS_EN);
-+
- 	writel_relaxed(0, base + SPI_CONFIG);
- 	writel_relaxed(SPI_IO_C_NO_TRI_STATE, base + SPI_IO_CONTROL);
- 
-@@ -732,6 +739,7 @@ static int spi_qup_remove(struct platfor
- }
- 
- static struct of_device_id spi_qup_dt_match[] = {
-+	{ .compatible = "qcom,spi-qup-v1.1.1", },
- 	{ .compatible = "qcom,spi-qup-v2.1.1", },
- 	{ .compatible = "qcom,spi-qup-v2.2.1", },
- 	{ }