ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 184 deletions

diff --git a/target/linux/ipq806x/patches/0093-ARM-dts-qcom-Update-msm8660-device-trees.patch b/target/linux/ipq806x/patches/0093-ARM-dts-qcom-Update-msm8660-device-trees.patch
deleted file mode 100644
index 8359faffaa..0000000000
--- a/target/linux/ipq806x/patches/0093-ARM-dts-qcom-Update-msm8660-device-trees.patch
+++ /dev/null
@@ -1,184 +0,0 @@
-From 355bf7c6410f5b6e37b5c2b28ebe59bb701c42d6 Mon Sep 17 00:00:00 2001
-From: Kumar Gala <galak@codeaurora.org>
-Date: Wed, 28 May 2014 12:12:40 -0500
-Subject: [PATCH 093/182] ARM: dts: qcom: Update msm8660 device trees
-
-* Move SoC peripherals into an SoC container node
-* Move serial enabling into board file (qcom-msm8660-surf.dts)
-* Cleanup cpu node to match binding spec, enable-method and compatible
-  should be per cpu, not part of the container
-* Add GSBI node and configuration of GSBI controller
-
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
----
- arch/arm/boot/dts/qcom-msm8660-surf.dts |   10 +++
- arch/arm/boot/dts/qcom-msm8660.dtsi     |  115 ++++++++++++++++++-------------
- 2 files changed, 78 insertions(+), 47 deletions(-)
-
---- a/arch/arm/boot/dts/qcom-msm8660-surf.dts
-+++ b/arch/arm/boot/dts/qcom-msm8660-surf.dts
-@@ -3,4 +3,14 @@
- / {
- 	model = "Qualcomm MSM8660 SURF";
- 	compatible = "qcom,msm8660-surf", "qcom,msm8660";
-+
-+	soc {
-+		gsbi@19c00000 {
-+			status = "ok";
-+			qcom,mode = <GSBI_PROT_I2C_UART>;
-+			serial@19c40000 {
-+				status = "ok";
-+			};
-+		};
-+	};
- };
---- a/arch/arm/boot/dts/qcom-msm8660.dtsi
-+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
-@@ -3,6 +3,7 @@
- /include/ "skeleton.dtsi"
- 
- #include <dt-bindings/clock/qcom,gcc-msm8660.h>
-+#include <dt-bindings/soc/qcom,gsbi.h>
- 
- / {
- 	model = "Qualcomm MSM8660";
-@@ -12,16 +13,18 @@
- 	cpus {
- 		#address-cells = <1>;
- 		#size-cells = <0>;
--		compatible = "qcom,scorpion";
--		enable-method = "qcom,gcc-msm8660";
- 
- 		cpu@0 {
-+			compatible = "qcom,scorpion";
-+			enable-method = "qcom,gcc-msm8660";
- 			device_type = "cpu";
- 			reg = <0>;
- 			next-level-cache = <&L2>;
- 		};
- 
- 		cpu@1 {
-+			compatible = "qcom,scorpion";
-+			enable-method = "qcom,gcc-msm8660";
- 			device_type = "cpu";
- 			reg = <1>;
- 			next-level-cache = <&L2>;
-@@ -33,55 +36,73 @@
- 		};
- 	};
- 
--	intc: interrupt-controller@2080000 {
--		compatible = "qcom,msm-8660-qgic";
--		interrupt-controller;
--		#interrupt-cells = <3>;
--		reg = < 0x02080000 0x1000 >,
--		      < 0x02081000 0x1000 >;
--	};
-+	soc: soc {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges;
-+		compatible = "simple-bus";
-+
-+		intc: interrupt-controller@2080000 {
-+			compatible = "qcom,msm-8660-qgic";
-+			interrupt-controller;
-+			#interrupt-cells = <3>;
-+			reg = < 0x02080000 0x1000 >,
-+			      < 0x02081000 0x1000 >;
-+		};
- 
--	timer@2000000 {
--		compatible = "qcom,scss-timer", "qcom,msm-timer";
--		interrupts = <1 0 0x301>,
--			     <1 1 0x301>,
--			     <1 2 0x301>;
--		reg = <0x02000000 0x100>;
--		clock-frequency = <27000000>,
--				  <32768>;
--		cpu-offset = <0x40000>;
--	};
-+		timer@2000000 {
-+			compatible = "qcom,scss-timer", "qcom,msm-timer";
-+			interrupts = <1 0 0x301>,
-+				     <1 1 0x301>,
-+				     <1 2 0x301>;
-+			reg = <0x02000000 0x100>;
-+			clock-frequency = <27000000>,
-+					  <32768>;
-+			cpu-offset = <0x40000>;
-+		};
- 
--	msmgpio: gpio@800000 {
--		compatible = "qcom,msm-gpio";
--		reg = <0x00800000 0x4000>;
--		gpio-controller;
--		#gpio-cells = <2>;
--		ngpio = <173>;
--		interrupts = <0 16 0x4>;
--		interrupt-controller;
--		#interrupt-cells = <2>;
--	};
-+		msmgpio: gpio@800000 {
-+			compatible = "qcom,msm-gpio";
-+			reg = <0x00800000 0x4000>;
-+			gpio-controller;
-+			#gpio-cells = <2>;
-+			ngpio = <173>;
-+			interrupts = <0 16 0x4>;
-+			interrupt-controller;
-+			#interrupt-cells = <2>;
-+		};
- 
--	gcc: clock-controller@900000 {
--		compatible = "qcom,gcc-msm8660";
--		#clock-cells = <1>;
--		#reset-cells = <1>;
--		reg = <0x900000 0x4000>;
--	};
-+		gcc: clock-controller@900000 {
-+			compatible = "qcom,gcc-msm8660";
-+			#clock-cells = <1>;
-+			#reset-cells = <1>;
-+			reg = <0x900000 0x4000>;
-+		};
- 
--	serial@19c40000 {
--		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
--		reg = <0x19c40000 0x1000>,
--		      <0x19c00000 0x1000>;
--		interrupts = <0 195 0x0>;
--		clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
--		clock-names = "core", "iface";
--	};
-+		gsbi12: gsbi@19c00000 {
-+			compatible = "qcom,gsbi-v1.0.0";
-+			reg = <0x19c00000 0x100>;
-+			clocks = <&gcc GSBI12_H_CLK>;
-+			clock-names = "iface";
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			ranges;
-+
-+			serial@19c40000 {
-+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-+				reg = <0x19c40000 0x1000>,
-+				      <0x19c00000 0x1000>;
-+				interrupts = <0 195 0x0>;
-+				clocks = <&gcc GSBI12_UART_CLK>, <&gcc GSBI12_H_CLK>;
-+				clock-names = "core", "iface";
-+				status = "disabled";
-+			};
-+		};
- 
--	qcom,ssbi@500000 {
--		compatible = "qcom,ssbi";
--		reg = <0x500000 0x1000>;
--		qcom,controller-type = "pmic-arbiter";
-+		qcom,ssbi@500000 {
-+			compatible = "qcom,ssbi";
-+			reg = <0x500000 0x1000>;
-+			qcom,controller-type = "pmic-arbiter";
-+		};
- 	};
- };