ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 64 deletions

diff --git a/target/linux/ipq806x/patches/0033-pinctrl-msm-Support-output-high-low-configuration.patch b/target/linux/ipq806x/patches/0033-pinctrl-msm-Support-output-high-low-configuration.patch
deleted file mode 100644
index f2f7c7d3b0..0000000000
--- a/target/linux/ipq806x/patches/0033-pinctrl-msm-Support-output-high-low-configuration.patch
+++ /dev/null
@@ -1,64 +0,0 @@
-From 469f83e0ed374250be5fd6202ac535276a752fa8 Mon Sep 17 00:00:00 2001
-From: Bjorn Andersson <bjorn@kryo.se>
-Date: Tue, 4 Feb 2014 19:55:31 -0800
-Subject: [PATCH 033/182] pinctrl-msm: Support output-{high,low} configuration
-
-Add support for configuring pins as output with value as from the
-pinconf-generic interface.
-
-Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
-Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
----
- drivers/pinctrl/pinctrl-msm.c |   27 +++++++++++++++++++++++++++
- 1 file changed, 27 insertions(+)
-
---- a/drivers/pinctrl/pinctrl-msm.c
-+++ b/drivers/pinctrl/pinctrl-msm.c
-@@ -214,6 +214,11 @@ static int msm_config_reg(struct msm_pin
- 		*bit = g->drv_bit;
- 		*mask = 7;
- 		break;
-+	case PIN_CONFIG_OUTPUT:
-+		*reg = g->ctl_reg;
-+		*bit = g->oe_bit;
-+		*mask = 1;
-+		break;
- 	default:
- 		dev_err(pctrl->dev, "Invalid config param %04x\n", param);
- 		return -ENOTSUPP;
-@@ -282,6 +287,14 @@ static int msm_config_group_get(struct p
- 	case PIN_CONFIG_DRIVE_STRENGTH:
- 		arg = msm_regval_to_drive(arg);
- 		break;
-+	case PIN_CONFIG_OUTPUT:
-+		/* Pin is not output */
-+		if (!arg)
-+			return -EINVAL;
-+
-+		val = readl(pctrl->regs + g->io_reg);
-+		arg = !!(val & BIT(g->in_bit));
-+		break;
- 	default:
- 		dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
- 			param);
-@@ -337,6 +350,20 @@ static int msm_config_group_set(struct p
- 			else
- 				arg = (arg / 2) - 1;
- 			break;
-+		case PIN_CONFIG_OUTPUT:
-+			/* set output value */
-+			spin_lock_irqsave(&pctrl->lock, flags);
-+			val = readl(pctrl->regs + g->io_reg);
-+			if (arg)
-+				val |= BIT(g->out_bit);
-+			else
-+				val &= ~BIT(g->out_bit);
-+			writel(val, pctrl->regs + g->io_reg);
-+			spin_unlock_irqrestore(&pctrl->lock, flags);
-+
-+			/* enable output */
-+			arg = 1;
-+			break;
- 		default:
- 			dev_err(pctrl->dev, "Unsupported config parameter: %x\n",
- 				param);