ipq806x: update target to v3.18

Patches in the ipq806x/patches folder were out of tree in v3.14. The
newest patch at the time was from June, so we can safely assume that
either the patches have been merged, or they have been rejected for
a good reason. If patches are seen missing, we'll cherry-pick them
on a per-needed basis.

This new kernel have been tested on AP148, which seems to works fine.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 44386

1 files changed, 0 insertions, 1423 deletions

diff --git a/target/linux/ipq806x/patches/0005-ARM-qcom-Split-Qualcomm-support-into-legacy-and-mult.patch b/target/linux/ipq806x/patches/0005-ARM-qcom-Split-Qualcomm-support-into-legacy-and-mult.patch
deleted file mode 100644
index 4cd4c4757f..0000000000
--- a/target/linux/ipq806x/patches/0005-ARM-qcom-Split-Qualcomm-support-into-legacy-and-mult.patch
+++ /dev/null
@@ -1,1423 +0,0 @@
-From 8c2a00c0129d6f718245f7a613c2bb28976b7973 Mon Sep 17 00:00:00 2001
-From: Kumar Gala <galak@codeaurora.org>
-Date: Tue, 21 Jan 2014 17:14:10 -0600
-Subject: [PATCH 005/182] ARM: qcom: Split Qualcomm support into legacy and
- multiplatform
-
-Introduce a new mach-qcom that will support SoCs that intend to be
-multiplatform compatible while keeping mach-msm to legacy SoC/board
-support that will not transition over to multiplatform.
-
-As part of this, we move support for MSM8X60, MSM8960 and MSM8974 over
-to mach-qcom.
-
-Signed-off-by: Kumar Gala <galak@codeaurora.org>
----
- MAINTAINERS                   |    8 ++
- arch/arm/Kconfig              |    7 +-
- arch/arm/Kconfig.debug        |    2 +-
- arch/arm/Makefile             |    1 +
- arch/arm/boot/dts/Makefile    |    6 +-
- arch/arm/mach-msm/Kconfig     |   45 +------
- arch/arm/mach-msm/Makefile    |    6 -
- arch/arm/mach-msm/board-dt.c  |   41 ------
- arch/arm/mach-msm/platsmp.c   |  137 -------------------
- arch/arm/mach-msm/scm-boot.c  |   39 ------
- arch/arm/mach-msm/scm-boot.h  |   22 ---
- arch/arm/mach-msm/scm.c       |  299 -----------------------------------------
- arch/arm/mach-msm/scm.h       |   25 ----
- arch/arm/mach-qcom/Kconfig    |   33 +++++
- arch/arm/mach-qcom/Makefile   |    5 +
- arch/arm/mach-qcom/board.c    |   40 ++++++
- arch/arm/mach-qcom/platsmp.c  |  137 +++++++++++++++++++
- arch/arm/mach-qcom/scm-boot.c |   39 ++++++
- arch/arm/mach-qcom/scm-boot.h |   22 +++
- arch/arm/mach-qcom/scm.c      |  299 +++++++++++++++++++++++++++++++++++++++++
- arch/arm/mach-qcom/scm.h      |   25 ++++
- 21 files changed, 619 insertions(+), 619 deletions(-)
- delete mode 100644 arch/arm/mach-msm/board-dt.c
- delete mode 100644 arch/arm/mach-msm/platsmp.c
- delete mode 100644 arch/arm/mach-msm/scm-boot.c
- delete mode 100644 arch/arm/mach-msm/scm-boot.h
- delete mode 100644 arch/arm/mach-msm/scm.c
- delete mode 100644 arch/arm/mach-msm/scm.h
- create mode 100644 arch/arm/mach-qcom/Kconfig
- create mode 100644 arch/arm/mach-qcom/Makefile
- create mode 100644 arch/arm/mach-qcom/board.c
- create mode 100644 arch/arm/mach-qcom/platsmp.c
- create mode 100644 arch/arm/mach-qcom/scm-boot.c
- create mode 100644 arch/arm/mach-qcom/scm-boot.h
- create mode 100644 arch/arm/mach-qcom/scm.c
- create mode 100644 arch/arm/mach-qcom/scm.h
-
---- a/MAINTAINERS
-+++ b/MAINTAINERS
-@@ -1168,6 +1168,14 @@ L:	linux-arm-kernel@lists.infradead.org
- W:	http://www.arm.linux.org.uk/
- S:	Maintained
- 
-+ARM/QUALCOMM SUPPORT
-+M:	Kumar Gala <galak@codeaurora.org>
-+M:	David Brown <davidb@codeaurora.org>
-+L:	linux-arm-msm@vger.kernel.org
-+S:	Maintained
-+F:	arch/arm/mach-qcom/
-+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom.git
-+
- ARM/RADISYS ENP2611 MACHINE SUPPORT
- M:	Lennert Buytenhek <kernel@wantstofly.org>
- L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -658,9 +658,8 @@ config ARCH_PXA
- 	help
- 	  Support for Intel/Marvell's PXA2xx/PXA3xx processor line.
- 
--config ARCH_MSM_NODT
--	bool "Qualcomm MSM"
--	select ARCH_MSM
-+config ARCH_MSM
-+	bool "Qualcomm MSM (non-multiplatform)"
- 	select ARCH_REQUIRE_GPIOLIB
- 	select COMMON_CLK
- 	select GENERIC_CLOCKEVENTS
-@@ -1006,6 +1005,8 @@ source "arch/arm/plat-pxa/Kconfig"
- 
- source "arch/arm/mach-mmp/Kconfig"
- 
-+source "arch/arm/mach-qcom/Kconfig"
-+
- source "arch/arm/mach-realview/Kconfig"
- 
- source "arch/arm/mach-rockchip/Kconfig"
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -956,7 +956,7 @@ config DEBUG_STI_UART
- 
- config DEBUG_MSM_UART
- 	bool
--	depends on ARCH_MSM
-+	depends on ARCH_MSM || ARCH_QCOM
- 
- config DEBUG_LL_INCLUDE
- 	string
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -185,6 +185,7 @@ machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap
- machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
- machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
- machine-$(CONFIG_ARCH_PXA)		+= pxa
-+machine-$(CONFIG_ARCH_QCOM)		+= qcom
- machine-$(CONFIG_ARCH_REALVIEW)		+= realview
- machine-$(CONFIG_ARCH_ROCKCHIP)		+= rockchip
- machine-$(CONFIG_ARCH_RPC)		+= rpc
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -119,9 +119,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-
- 	kirkwood-ts219-6282.dtb
- dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb
- dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb
--dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \
--	qcom-msm8960-cdp.dtb \
--	qcom-apq8074-dragonboard.dtb
- dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
- 	armada-370-mirabox.dtb \
- 	armada-370-netgear-rn102.dtb \
-@@ -234,6 +231,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420
- 	dra7-evm.dtb
- dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-ethernet-disk-mini-v2.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb
-+dtb-$(CONFIG_ARCH_QCOM) += qcom-msm8660-surf.dtb \
-+	qcom-msm8960-cdp.dtb \
-+	qcom-apq8074-dragonboard.dtb
- dtb-$(CONFIG_ARCH_U8500) += ste-snowball.dtb \
- 	ste-hrefprev60-stuib.dtb \
- 	ste-hrefprev60-tvk.dtb \
---- a/arch/arm/mach-msm/Kconfig
-+++ b/arch/arm/mach-msm/Kconfig
-@@ -1,50 +1,9 @@
--config ARCH_MSM
--	bool
--
--config ARCH_MSM_DT
--	bool "Qualcomm MSM DT Support" if ARCH_MULTI_V7
--	select ARCH_MSM
--	select ARCH_REQUIRE_GPIOLIB
--	select CLKSRC_OF
--	select GENERIC_CLOCKEVENTS
--	help
--	  Support for Qualcomm's devicetree based MSM systems.
--
- if ARCH_MSM
- 
--menu "Qualcomm MSM SoC Selection"
--	depends on ARCH_MSM_DT
--
--config ARCH_MSM8X60
--	bool "Enable support for MSM8X60"
--	select ARM_GIC
--	select CPU_V7
--	select HAVE_SMP
--	select MSM_SCM if SMP
--	select CLKSRC_QCOM
--
--config ARCH_MSM8960
--	bool "Enable support for MSM8960"
--	select ARM_GIC
--	select CPU_V7
--	select HAVE_SMP
--	select MSM_SCM if SMP
--	select CLKSRC_QCOM
--
--config ARCH_MSM8974
--	bool "Enable support for MSM8974"
--	select ARM_GIC
--	select CPU_V7
--	select HAVE_ARM_ARCH_TIMER
--	select HAVE_SMP
--	select MSM_SCM if SMP
--
--endmenu
--
- choice
- 	prompt "Qualcomm MSM SoC Type"
- 	default ARCH_MSM7X00A
--	depends on ARCH_MSM_NODT
-+	depends on ARCH_MSM
- 
- config ARCH_MSM7X00A
- 	bool "MSM7x00A / MSM7x01A"
-@@ -99,7 +58,7 @@ config  MSM_VIC
- 	bool
- 
- menu "Qualcomm MSM Board Type"
--	depends on ARCH_MSM_NODT
-+	depends on ARCH_MSM
- 
- config MACH_HALIBUT
- 	depends on ARCH_MSM
---- a/arch/arm/mach-msm/Makefile
-+++ b/arch/arm/mach-msm/Makefile
-@@ -13,17 +13,11 @@ obj-$(CONFIG_ARCH_QSD8X50) += dma.o io.o
- 
- obj-$(CONFIG_MSM_SMD) += smd.o smd_debug.o
- obj-$(CONFIG_MSM_SMD) += last_radio_log.o
--obj-$(CONFIG_MSM_SCM) += scm.o scm-boot.o
--
--CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
--
--obj-$(CONFIG_SMP) += platsmp.o
- 
- obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o devices-msm7x00.o
- obj-$(CONFIG_MACH_TROUT) += board-trout.o board-trout-gpio.o board-trout-mmc.o board-trout-panel.o devices-msm7x00.o
- obj-$(CONFIG_MACH_HALIBUT) += board-halibut.o devices-msm7x00.o
- obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o
- obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o
--obj-$(CONFIG_ARCH_MSM_DT) += board-dt.o
- obj-$(CONFIG_MSM_GPIOMUX) += gpiomux.o
- obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o
---- a/arch/arm/mach-msm/board-dt.c
-+++ /dev/null
-@@ -1,41 +0,0 @@
--/* Copyright (c) 2010-2012,2013 The Linux Foundation. All rights reserved.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 and
-- * only version 2 as published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- */
--
--#include <linux/init.h>
--#include <linux/of.h>
--#include <linux/of_platform.h>
--
--#include <asm/mach/arch.h>
--#include <asm/mach/map.h>
--
--#include "common.h"
--
--static const char * const msm_dt_match[] __initconst = {
--	"qcom,msm8660-fluid",
--	"qcom,msm8660-surf",
--	"qcom,msm8960-cdp",
--	NULL
--};
--
--static const char * const apq8074_dt_match[] __initconst = {
--	"qcom,apq8074-dragonboard",
--	NULL
--};
--
--DT_MACHINE_START(MSM_DT, "Qualcomm MSM (Flattened Device Tree)")
--	.smp = smp_ops(msm_smp_ops),
--	.dt_compat = msm_dt_match,
--MACHINE_END
--
--DT_MACHINE_START(APQ_DT, "Qualcomm MSM (Flattened Device Tree)")
--	.dt_compat = apq8074_dt_match,
--MACHINE_END
---- a/arch/arm/mach-msm/platsmp.c
-+++ /dev/null
-@@ -1,137 +0,0 @@
--/*
-- *  Copyright (C) 2002 ARM Ltd.
-- *  All Rights Reserved
-- *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 as
-- * published by the Free Software Foundation.
-- */
--
--#include <linux/init.h>
--#include <linux/errno.h>
--#include <linux/delay.h>
--#include <linux/device.h>
--#include <linux/smp.h>
--#include <linux/io.h>
--
--#include <asm/cputype.h>
--#include <asm/smp_plat.h>
--
--#include "scm-boot.h"
--#include "common.h"
--
--#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
--#define SCSS_CPU1CORE_RESET 0xD80
--#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
--
--extern void secondary_startup(void);
--
--static DEFINE_SPINLOCK(boot_lock);
--
--#ifdef CONFIG_HOTPLUG_CPU
--static void __ref msm_cpu_die(unsigned int cpu)
--{
--	wfi();
--}
--#endif
--
--static inline int get_core_count(void)
--{
--	/* 1 + the PART[1:0] field of MIDR */
--	return ((read_cpuid_id() >> 4) & 3) + 1;
--}
--
--static void msm_secondary_init(unsigned int cpu)
--{
--	/*
--	 * Synchronise with the boot thread.
--	 */
--	spin_lock(&boot_lock);
--	spin_unlock(&boot_lock);
--}
--
--static void prepare_cold_cpu(unsigned int cpu)
--{
--	int ret;
--	ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
--				SCM_FLAG_COLDBOOT_CPU1);
--	if (ret == 0) {
--		void __iomem *sc1_base_ptr;
--		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
--		if (sc1_base_ptr) {
--			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
--			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
--			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
--			iounmap(sc1_base_ptr);
--		}
--	} else
--		printk(KERN_DEBUG "Failed to set secondary core boot "
--				  "address\n");
--}
--
--static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
--{
--	static int cold_boot_done;
--
--	/* Only need to bring cpu out of reset this way once */
--	if (cold_boot_done == false) {
--		prepare_cold_cpu(cpu);
--		cold_boot_done = true;
--	}
--
--	/*
--	 * set synchronisation state between this boot processor
--	 * and the secondary one
--	 */
--	spin_lock(&boot_lock);
--
--	/*
--	 * Send the secondary CPU a soft interrupt, thereby causing
--	 * the boot monitor to read the system wide flags register,
--	 * and branch to the address found there.
--	 */
--	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
--
--	/*
--	 * now the secondary core is starting up let it run its
--	 * calibrations, then wait for it to finish
--	 */
--	spin_unlock(&boot_lock);
--
--	return 0;
--}
--
--/*
-- * Initialise the CPU possible map early - this describes the CPUs
-- * which may be present or become present in the system. The msm8x60
-- * does not support the ARM SCU, so just set the possible cpu mask to
-- * NR_CPUS.
-- */
--static void __init msm_smp_init_cpus(void)
--{
--	unsigned int i, ncores = get_core_count();
--
--	if (ncores > nr_cpu_ids) {
--		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
--			ncores, nr_cpu_ids);
--		ncores = nr_cpu_ids;
--	}
--
--	for (i = 0; i < ncores; i++)
--		set_cpu_possible(i, true);
--}
--
--static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
--{
--}
--
--struct smp_operations msm_smp_ops __initdata = {
--	.smp_init_cpus		= msm_smp_init_cpus,
--	.smp_prepare_cpus	= msm_smp_prepare_cpus,
--	.smp_secondary_init	= msm_secondary_init,
--	.smp_boot_secondary	= msm_boot_secondary,
--#ifdef CONFIG_HOTPLUG_CPU
--	.cpu_die		= msm_cpu_die,
--#endif
--};
---- a/arch/arm/mach-msm/scm-boot.c
-+++ /dev/null
-@@ -1,39 +0,0 @@
--/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 and
-- * only version 2 as published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-- * 02110-1301, USA.
-- */
--
--#include <linux/module.h>
--#include <linux/slab.h>
--
--#include "scm.h"
--#include "scm-boot.h"
--
--/*
-- * Set the cold/warm boot address for one of the CPU cores.
-- */
--int scm_set_boot_addr(phys_addr_t addr, int flags)
--{
--	struct {
--		unsigned int flags;
--		phys_addr_t  addr;
--	} cmd;
--
--	cmd.addr = addr;
--	cmd.flags = flags;
--	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
--			&cmd, sizeof(cmd), NULL, 0);
--}
--EXPORT_SYMBOL(scm_set_boot_addr);
---- a/arch/arm/mach-msm/scm-boot.h
-+++ /dev/null
-@@ -1,22 +0,0 @@
--/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 and
-- * only version 2 as published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- */
--#ifndef __MACH_SCM_BOOT_H
--#define __MACH_SCM_BOOT_H
--
--#define SCM_BOOT_ADDR			0x1
--#define SCM_FLAG_COLDBOOT_CPU1		0x1
--#define SCM_FLAG_WARMBOOT_CPU1		0x2
--#define SCM_FLAG_WARMBOOT_CPU0		0x4
--
--int scm_set_boot_addr(phys_addr_t addr, int flags);
--
--#endif
---- a/arch/arm/mach-msm/scm.c
-+++ /dev/null
-@@ -1,299 +0,0 @@
--/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 and
-- * only version 2 as published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- *
-- * You should have received a copy of the GNU General Public License
-- * along with this program; if not, write to the Free Software
-- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-- * 02110-1301, USA.
-- */
--
--#include <linux/slab.h>
--#include <linux/io.h>
--#include <linux/module.h>
--#include <linux/mutex.h>
--#include <linux/errno.h>
--#include <linux/err.h>
--
--#include <asm/cacheflush.h>
--
--#include "scm.h"
--
--/* Cache line size for msm8x60 */
--#define CACHELINESIZE 32
--
--#define SCM_ENOMEM		-5
--#define SCM_EOPNOTSUPP		-4
--#define SCM_EINVAL_ADDR		-3
--#define SCM_EINVAL_ARG		-2
--#define SCM_ERROR		-1
--#define SCM_INTERRUPTED		1
--
--static DEFINE_MUTEX(scm_lock);
--
--/**
-- * struct scm_command - one SCM command buffer
-- * @len: total available memory for command and response
-- * @buf_offset: start of command buffer
-- * @resp_hdr_offset: start of response buffer
-- * @id: command to be executed
-- * @buf: buffer returned from scm_get_command_buffer()
-- *
-- * An SCM command is laid out in memory as follows:
-- *
-- *	------------------- <--- struct scm_command
-- *	| command header  |
-- *	------------------- <--- scm_get_command_buffer()
-- *	| command buffer  |
-- *	------------------- <--- struct scm_response and
-- *	| response header |      scm_command_to_response()
-- *	------------------- <--- scm_get_response_buffer()
-- *	| response buffer |
-- *	-------------------
-- *
-- * There can be arbitrary padding between the headers and buffers so
-- * you should always use the appropriate scm_get_*_buffer() routines
-- * to access the buffers in a safe manner.
-- */
--struct scm_command {
--	u32	len;
--	u32	buf_offset;
--	u32	resp_hdr_offset;
--	u32	id;
--	u32	buf[0];
--};
--
--/**
-- * struct scm_response - one SCM response buffer
-- * @len: total available memory for response
-- * @buf_offset: start of response data relative to start of scm_response
-- * @is_complete: indicates if the command has finished processing
-- */
--struct scm_response {
--	u32	len;
--	u32	buf_offset;
--	u32	is_complete;
--};
--
--/**
-- * alloc_scm_command() - Allocate an SCM command
-- * @cmd_size: size of the command buffer
-- * @resp_size: size of the response buffer
-- *
-- * Allocate an SCM command, including enough room for the command
-- * and response headers as well as the command and response buffers.
-- *
-- * Returns a valid &scm_command on success or %NULL if the allocation fails.
-- */
--static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
--{
--	struct scm_command *cmd;
--	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
--		resp_size;
--
--	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
--	if (cmd) {
--		cmd->len = len;
--		cmd->buf_offset = offsetof(struct scm_command, buf);
--		cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
--	}
--	return cmd;
--}
--
--/**
-- * free_scm_command() - Free an SCM command
-- * @cmd: command to free
-- *
-- * Free an SCM command.
-- */
--static inline void free_scm_command(struct scm_command *cmd)
--{
--	kfree(cmd);
--}
--
--/**
-- * scm_command_to_response() - Get a pointer to a scm_response
-- * @cmd: command
-- *
-- * Returns a pointer to a response for a command.
-- */
--static inline struct scm_response *scm_command_to_response(
--		const struct scm_command *cmd)
--{
--	return (void *)cmd + cmd->resp_hdr_offset;
--}
--
--/**
-- * scm_get_command_buffer() - Get a pointer to a command buffer
-- * @cmd: command
-- *
-- * Returns a pointer to the command buffer of a command.
-- */
--static inline void *scm_get_command_buffer(const struct scm_command *cmd)
--{
--	return (void *)cmd->buf;
--}
--
--/**
-- * scm_get_response_buffer() - Get a pointer to a response buffer
-- * @rsp: response
-- *
-- * Returns a pointer to a response buffer of a response.
-- */
--static inline void *scm_get_response_buffer(const struct scm_response *rsp)
--{
--	return (void *)rsp + rsp->buf_offset;
--}
--
--static int scm_remap_error(int err)
--{
--	switch (err) {
--	case SCM_ERROR:
--		return -EIO;
--	case SCM_EINVAL_ADDR:
--	case SCM_EINVAL_ARG:
--		return -EINVAL;
--	case SCM_EOPNOTSUPP:
--		return -EOPNOTSUPP;
--	case SCM_ENOMEM:
--		return -ENOMEM;
--	}
--	return -EINVAL;
--}
--
--static u32 smc(u32 cmd_addr)
--{
--	int context_id;
--	register u32 r0 asm("r0") = 1;
--	register u32 r1 asm("r1") = (u32)&context_id;
--	register u32 r2 asm("r2") = cmd_addr;
--	do {
--		asm volatile(
--			__asmeq("%0", "r0")
--			__asmeq("%1", "r0")
--			__asmeq("%2", "r1")
--			__asmeq("%3", "r2")
--#ifdef REQUIRES_SEC
--			".arch_extension sec\n"
--#endif
--			"smc	#0	@ switch to secure world\n"
--			: "=r" (r0)
--			: "r" (r0), "r" (r1), "r" (r2)
--			: "r3");
--	} while (r0 == SCM_INTERRUPTED);
--
--	return r0;
--}
--
--static int __scm_call(const struct scm_command *cmd)
--{
--	int ret;
--	u32 cmd_addr = virt_to_phys(cmd);
--
--	/*
--	 * Flush the entire cache here so callers don't have to remember
--	 * to flush the cache when passing physical addresses to the secure
--	 * side in the buffer.
--	 */
--	flush_cache_all();
--	ret = smc(cmd_addr);
--	if (ret < 0)
--		ret = scm_remap_error(ret);
--
--	return ret;
--}
--
--/**
-- * scm_call() - Send an SCM command
-- * @svc_id: service identifier
-- * @cmd_id: command identifier
-- * @cmd_buf: command buffer
-- * @cmd_len: length of the command buffer
-- * @resp_buf: response buffer
-- * @resp_len: length of the response buffer
-- *
-- * Sends a command to the SCM and waits for the command to finish processing.
-- */
--int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
--		void *resp_buf, size_t resp_len)
--{
--	int ret;
--	struct scm_command *cmd;
--	struct scm_response *rsp;
--
--	cmd = alloc_scm_command(cmd_len, resp_len);
--	if (!cmd)
--		return -ENOMEM;
--
--	cmd->id = (svc_id << 10) | cmd_id;
--	if (cmd_buf)
--		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
--
--	mutex_lock(&scm_lock);
--	ret = __scm_call(cmd);
--	mutex_unlock(&scm_lock);
--	if (ret)
--		goto out;
--
--	rsp = scm_command_to_response(cmd);
--	do {
--		u32 start = (u32)rsp;
--		u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
--		start &= ~(CACHELINESIZE - 1);
--		while (start < end) {
--			asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
--			     : "memory");
--			start += CACHELINESIZE;
--		}
--	} while (!rsp->is_complete);
--
--	if (resp_buf)
--		memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
--out:
--	free_scm_command(cmd);
--	return ret;
--}
--EXPORT_SYMBOL(scm_call);
--
--u32 scm_get_version(void)
--{
--	int context_id;
--	static u32 version = -1;
--	register u32 r0 asm("r0");
--	register u32 r1 asm("r1");
--
--	if (version != -1)
--		return version;
--
--	mutex_lock(&scm_lock);
--
--	r0 = 0x1 << 8;
--	r1 = (u32)&context_id;
--	do {
--		asm volatile(
--			__asmeq("%0", "r0")
--			__asmeq("%1", "r1")
--			__asmeq("%2", "r0")
--			__asmeq("%3", "r1")
--#ifdef REQUIRES_SEC
--			".arch_extension sec\n"
--#endif
--			"smc	#0	@ switch to secure world\n"
--			: "=r" (r0), "=r" (r1)
--			: "r" (r0), "r" (r1)
--			: "r2", "r3");
--	} while (r0 == SCM_INTERRUPTED);
--
--	version = r1;
--	mutex_unlock(&scm_lock);
--
--	return version;
--}
--EXPORT_SYMBOL(scm_get_version);
---- a/arch/arm/mach-msm/scm.h
-+++ /dev/null
-@@ -1,25 +0,0 @@
--/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-- *
-- * This program is free software; you can redistribute it and/or modify
-- * it under the terms of the GNU General Public License version 2 and
-- * only version 2 as published by the Free Software Foundation.
-- *
-- * This program is distributed in the hope that it will be useful,
-- * but WITHOUT ANY WARRANTY; without even the implied warranty of
-- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-- * GNU General Public License for more details.
-- */
--#ifndef __MACH_SCM_H
--#define __MACH_SCM_H
--
--#define SCM_SVC_BOOT			0x1
--#define SCM_SVC_PIL			0x2
--
--extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
--		void *resp_buf, size_t resp_len);
--
--#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
--
--extern u32 scm_get_version(void);
--
--#endif
---- /dev/null
-+++ b/arch/arm/mach-qcom/Kconfig
-@@ -0,0 +1,33 @@
-+config ARCH_QCOM
-+	bool "Qualcomm Support" if ARCH_MULTI_V7
-+	select ARCH_REQUIRE_GPIOLIB
-+	select ARM_GIC
-+	select CLKSRC_OF
-+	select GENERIC_CLOCKEVENTS
-+	select HAVE_SMP
-+	select QCOM_SCM if SMP
-+	help
-+	  Support for Qualcomm's devicetree based systems.
-+
-+if ARCH_QCOM
-+
-+menu "Qualcomm SoC Selection"
-+
-+config ARCH_MSM8X60
-+	bool "Enable support for MSM8X60"
-+	select CLKSRC_QCOM
-+
-+config ARCH_MSM8960
-+	bool "Enable support for MSM8960"
-+	select CLKSRC_QCOM
-+
-+config ARCH_MSM8974
-+	bool "Enable support for MSM8974"
-+	select HAVE_ARM_ARCH_TIMER
-+
-+endmenu
-+
-+config QCOM_SCM
-+	bool
-+
-+endif
---- /dev/null
-+++ b/arch/arm/mach-qcom/Makefile
-@@ -0,0 +1,5 @@
-+obj-y			:= board.o
-+obj-$(CONFIG_SMP)	+= platsmp.o
-+obj-$(CONFIG_QCOM_SCM)	+= scm.o scm-boot.o
-+
-+CFLAGS_scm.o :=$(call as-instr,.arch_extension sec,-DREQUIRES_SEC=1)
---- /dev/null
-+++ b/arch/arm/mach-qcom/board.c
-@@ -0,0 +1,40 @@
-+/* Copyright (c) 2010-2014 The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/of.h>
-+#include <linux/of_platform.h>
-+
-+#include <asm/mach/arch.h>
-+#include <asm/mach/map.h>
-+
-+extern struct smp_operations msm_smp_ops;
-+
-+static const char * const qcom_dt_match[] __initconst = {
-+	"qcom,msm8660-surf",
-+	"qcom,msm8960-cdp",
-+	NULL
-+};
-+
-+static const char * const apq8074_dt_match[] __initconst = {
-+	"qcom,apq8074-dragonboard",
-+	NULL
-+};
-+
-+DT_MACHINE_START(QCOM_DT, "Qualcomm (Flattened Device Tree)")
-+	.smp = smp_ops(msm_smp_ops),
-+	.dt_compat = qcom_dt_match,
-+MACHINE_END
-+
-+DT_MACHINE_START(APQ_DT, "Qualcomm (Flattened Device Tree)")
-+	.dt_compat = apq8074_dt_match,
-+MACHINE_END
---- /dev/null
-+++ b/arch/arm/mach-qcom/platsmp.c
-@@ -0,0 +1,137 @@
-+/*
-+ *  Copyright (C) 2002 ARM Ltd.
-+ *  All Rights Reserved
-+ *  Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-+ *  Copyright (c) 2014 The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/errno.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/smp.h>
-+#include <linux/io.h>
-+
-+#include <asm/cputype.h>
-+#include <asm/smp_plat.h>
-+
-+#include "scm-boot.h"
-+
-+#define VDD_SC1_ARRAY_CLAMP_GFS_CTL 0x15A0
-+#define SCSS_CPU1CORE_RESET 0xD80
-+#define SCSS_DBG_STATUS_CORE_PWRDUP 0xE64
-+
-+extern void secondary_startup(void);
-+
-+static DEFINE_SPINLOCK(boot_lock);
-+
-+#ifdef CONFIG_HOTPLUG_CPU
-+static void __ref msm_cpu_die(unsigned int cpu)
-+{
-+	wfi();
-+}
-+#endif
-+
-+static inline int get_core_count(void)
-+{
-+	/* 1 + the PART[1:0] field of MIDR */
-+	return ((read_cpuid_id() >> 4) & 3) + 1;
-+}
-+
-+static void msm_secondary_init(unsigned int cpu)
-+{
-+	/*
-+	 * Synchronise with the boot thread.
-+	 */
-+	spin_lock(&boot_lock);
-+	spin_unlock(&boot_lock);
-+}
-+
-+static void prepare_cold_cpu(unsigned int cpu)
-+{
-+	int ret;
-+	ret = scm_set_boot_addr(virt_to_phys(secondary_startup),
-+				SCM_FLAG_COLDBOOT_CPU1);
-+	if (ret == 0) {
-+		void __iomem *sc1_base_ptr;
-+		sc1_base_ptr = ioremap_nocache(0x00902000, SZ_4K*2);
-+		if (sc1_base_ptr) {
-+			writel(0, sc1_base_ptr + VDD_SC1_ARRAY_CLAMP_GFS_CTL);
-+			writel(0, sc1_base_ptr + SCSS_CPU1CORE_RESET);
-+			writel(3, sc1_base_ptr + SCSS_DBG_STATUS_CORE_PWRDUP);
-+			iounmap(sc1_base_ptr);
-+		}
-+	} else
-+		printk(KERN_DEBUG "Failed to set secondary core boot "
-+				  "address\n");
-+}
-+
-+static int msm_boot_secondary(unsigned int cpu, struct task_struct *idle)
-+{
-+	static int cold_boot_done;
-+
-+	/* Only need to bring cpu out of reset this way once */
-+	if (cold_boot_done == false) {
-+		prepare_cold_cpu(cpu);
-+		cold_boot_done = true;
-+	}
-+
-+	/*
-+	 * set synchronisation state between this boot processor
-+	 * and the secondary one
-+	 */
-+	spin_lock(&boot_lock);
-+
-+	/*
-+	 * Send the secondary CPU a soft interrupt, thereby causing
-+	 * the boot monitor to read the system wide flags register,
-+	 * and branch to the address found there.
-+	 */
-+	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-+
-+	/*
-+	 * now the secondary core is starting up let it run its
-+	 * calibrations, then wait for it to finish
-+	 */
-+	spin_unlock(&boot_lock);
-+
-+	return 0;
-+}
-+
-+/*
-+ * Initialise the CPU possible map early - this describes the CPUs
-+ * which may be present or become present in the system. The msm8x60
-+ * does not support the ARM SCU, so just set the possible cpu mask to
-+ * NR_CPUS.
-+ */
-+static void __init msm_smp_init_cpus(void)
-+{
-+	unsigned int i, ncores = get_core_count();
-+
-+	if (ncores > nr_cpu_ids) {
-+		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-+			ncores, nr_cpu_ids);
-+		ncores = nr_cpu_ids;
-+	}
-+
-+	for (i = 0; i < ncores; i++)
-+		set_cpu_possible(i, true);
-+}
-+
-+static void __init msm_smp_prepare_cpus(unsigned int max_cpus)
-+{
-+}
-+
-+struct smp_operations msm_smp_ops __initdata = {
-+	.smp_init_cpus		= msm_smp_init_cpus,
-+	.smp_prepare_cpus	= msm_smp_prepare_cpus,
-+	.smp_secondary_init	= msm_secondary_init,
-+	.smp_boot_secondary	= msm_boot_secondary,
-+#ifdef CONFIG_HOTPLUG_CPU
-+	.cpu_die		= msm_cpu_die,
-+#endif
-+};
---- /dev/null
-+++ b/arch/arm/mach-qcom/scm-boot.c
-@@ -0,0 +1,39 @@
-+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-+ * 02110-1301, USA.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/slab.h>
-+
-+#include "scm.h"
-+#include "scm-boot.h"
-+
-+/*
-+ * Set the cold/warm boot address for one of the CPU cores.
-+ */
-+int scm_set_boot_addr(phys_addr_t addr, int flags)
-+{
-+	struct {
-+		unsigned int flags;
-+		phys_addr_t  addr;
-+	} cmd;
-+
-+	cmd.addr = addr;
-+	cmd.flags = flags;
-+	return scm_call(SCM_SVC_BOOT, SCM_BOOT_ADDR,
-+			&cmd, sizeof(cmd), NULL, 0);
-+}
-+EXPORT_SYMBOL(scm_set_boot_addr);
---- /dev/null
-+++ b/arch/arm/mach-qcom/scm-boot.h
-@@ -0,0 +1,22 @@
-+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __MACH_SCM_BOOT_H
-+#define __MACH_SCM_BOOT_H
-+
-+#define SCM_BOOT_ADDR			0x1
-+#define SCM_FLAG_COLDBOOT_CPU1		0x1
-+#define SCM_FLAG_WARMBOOT_CPU1		0x2
-+#define SCM_FLAG_WARMBOOT_CPU0		0x4
-+
-+int scm_set_boot_addr(phys_addr_t addr, int flags);
-+
-+#endif
---- /dev/null
-+++ b/arch/arm/mach-qcom/scm.c
-@@ -0,0 +1,299 @@
-+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
-+ * 02110-1301, USA.
-+ */
-+
-+#include <linux/slab.h>
-+#include <linux/io.h>
-+#include <linux/module.h>
-+#include <linux/mutex.h>
-+#include <linux/errno.h>
-+#include <linux/err.h>
-+
-+#include <asm/cacheflush.h>
-+
-+#include "scm.h"
-+
-+/* Cache line size for msm8x60 */
-+#define CACHELINESIZE 32
-+
-+#define SCM_ENOMEM		-5
-+#define SCM_EOPNOTSUPP		-4
-+#define SCM_EINVAL_ADDR		-3
-+#define SCM_EINVAL_ARG		-2
-+#define SCM_ERROR		-1
-+#define SCM_INTERRUPTED		1
-+
-+static DEFINE_MUTEX(scm_lock);
-+
-+/**
-+ * struct scm_command - one SCM command buffer
-+ * @len: total available memory for command and response
-+ * @buf_offset: start of command buffer
-+ * @resp_hdr_offset: start of response buffer
-+ * @id: command to be executed
-+ * @buf: buffer returned from scm_get_command_buffer()
-+ *
-+ * An SCM command is laid out in memory as follows:
-+ *
-+ *	------------------- <--- struct scm_command
-+ *	| command header  |
-+ *	------------------- <--- scm_get_command_buffer()
-+ *	| command buffer  |
-+ *	------------------- <--- struct scm_response and
-+ *	| response header |      scm_command_to_response()
-+ *	------------------- <--- scm_get_response_buffer()
-+ *	| response buffer |
-+ *	-------------------
-+ *
-+ * There can be arbitrary padding between the headers and buffers so
-+ * you should always use the appropriate scm_get_*_buffer() routines
-+ * to access the buffers in a safe manner.
-+ */
-+struct scm_command {
-+	u32	len;
-+	u32	buf_offset;
-+	u32	resp_hdr_offset;
-+	u32	id;
-+	u32	buf[0];
-+};
-+
-+/**
-+ * struct scm_response - one SCM response buffer
-+ * @len: total available memory for response
-+ * @buf_offset: start of response data relative to start of scm_response
-+ * @is_complete: indicates if the command has finished processing
-+ */
-+struct scm_response {
-+	u32	len;
-+	u32	buf_offset;
-+	u32	is_complete;
-+};
-+
-+/**
-+ * alloc_scm_command() - Allocate an SCM command
-+ * @cmd_size: size of the command buffer
-+ * @resp_size: size of the response buffer
-+ *
-+ * Allocate an SCM command, including enough room for the command
-+ * and response headers as well as the command and response buffers.
-+ *
-+ * Returns a valid &scm_command on success or %NULL if the allocation fails.
-+ */
-+static struct scm_command *alloc_scm_command(size_t cmd_size, size_t resp_size)
-+{
-+	struct scm_command *cmd;
-+	size_t len = sizeof(*cmd) + sizeof(struct scm_response) + cmd_size +
-+		resp_size;
-+
-+	cmd = kzalloc(PAGE_ALIGN(len), GFP_KERNEL);
-+	if (cmd) {
-+		cmd->len = len;
-+		cmd->buf_offset = offsetof(struct scm_command, buf);
-+		cmd->resp_hdr_offset = cmd->buf_offset + cmd_size;
-+	}
-+	return cmd;
-+}
-+
-+/**
-+ * free_scm_command() - Free an SCM command
-+ * @cmd: command to free
-+ *
-+ * Free an SCM command.
-+ */
-+static inline void free_scm_command(struct scm_command *cmd)
-+{
-+	kfree(cmd);
-+}
-+
-+/**
-+ * scm_command_to_response() - Get a pointer to a scm_response
-+ * @cmd: command
-+ *
-+ * Returns a pointer to a response for a command.
-+ */
-+static inline struct scm_response *scm_command_to_response(
-+		const struct scm_command *cmd)
-+{
-+	return (void *)cmd + cmd->resp_hdr_offset;
-+}
-+
-+/**
-+ * scm_get_command_buffer() - Get a pointer to a command buffer
-+ * @cmd: command
-+ *
-+ * Returns a pointer to the command buffer of a command.
-+ */
-+static inline void *scm_get_command_buffer(const struct scm_command *cmd)
-+{
-+	return (void *)cmd->buf;
-+}
-+
-+/**
-+ * scm_get_response_buffer() - Get a pointer to a response buffer
-+ * @rsp: response
-+ *
-+ * Returns a pointer to a response buffer of a response.
-+ */
-+static inline void *scm_get_response_buffer(const struct scm_response *rsp)
-+{
-+	return (void *)rsp + rsp->buf_offset;
-+}
-+
-+static int scm_remap_error(int err)
-+{
-+	switch (err) {
-+	case SCM_ERROR:
-+		return -EIO;
-+	case SCM_EINVAL_ADDR:
-+	case SCM_EINVAL_ARG:
-+		return -EINVAL;
-+	case SCM_EOPNOTSUPP:
-+		return -EOPNOTSUPP;
-+	case SCM_ENOMEM:
-+		return -ENOMEM;
-+	}
-+	return -EINVAL;
-+}
-+
-+static u32 smc(u32 cmd_addr)
-+{
-+	int context_id;
-+	register u32 r0 asm("r0") = 1;
-+	register u32 r1 asm("r1") = (u32)&context_id;
-+	register u32 r2 asm("r2") = cmd_addr;
-+	do {
-+		asm volatile(
-+			__asmeq("%0", "r0")
-+			__asmeq("%1", "r0")
-+			__asmeq("%2", "r1")
-+			__asmeq("%3", "r2")
-+#ifdef REQUIRES_SEC
-+			".arch_extension sec\n"
-+#endif
-+			"smc	#0	@ switch to secure world\n"
-+			: "=r" (r0)
-+			: "r" (r0), "r" (r1), "r" (r2)
-+			: "r3");
-+	} while (r0 == SCM_INTERRUPTED);
-+
-+	return r0;
-+}
-+
-+static int __scm_call(const struct scm_command *cmd)
-+{
-+	int ret;
-+	u32 cmd_addr = virt_to_phys(cmd);
-+
-+	/*
-+	 * Flush the entire cache here so callers don't have to remember
-+	 * to flush the cache when passing physical addresses to the secure
-+	 * side in the buffer.
-+	 */
-+	flush_cache_all();
-+	ret = smc(cmd_addr);
-+	if (ret < 0)
-+		ret = scm_remap_error(ret);
-+
-+	return ret;
-+}
-+
-+/**
-+ * scm_call() - Send an SCM command
-+ * @svc_id: service identifier
-+ * @cmd_id: command identifier
-+ * @cmd_buf: command buffer
-+ * @cmd_len: length of the command buffer
-+ * @resp_buf: response buffer
-+ * @resp_len: length of the response buffer
-+ *
-+ * Sends a command to the SCM and waits for the command to finish processing.
-+ */
-+int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-+		void *resp_buf, size_t resp_len)
-+{
-+	int ret;
-+	struct scm_command *cmd;
-+	struct scm_response *rsp;
-+
-+	cmd = alloc_scm_command(cmd_len, resp_len);
-+	if (!cmd)
-+		return -ENOMEM;
-+
-+	cmd->id = (svc_id << 10) | cmd_id;
-+	if (cmd_buf)
-+		memcpy(scm_get_command_buffer(cmd), cmd_buf, cmd_len);
-+
-+	mutex_lock(&scm_lock);
-+	ret = __scm_call(cmd);
-+	mutex_unlock(&scm_lock);
-+	if (ret)
-+		goto out;
-+
-+	rsp = scm_command_to_response(cmd);
-+	do {
-+		u32 start = (u32)rsp;
-+		u32 end = (u32)scm_get_response_buffer(rsp) + resp_len;
-+		start &= ~(CACHELINESIZE - 1);
-+		while (start < end) {
-+			asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start)
-+			     : "memory");
-+			start += CACHELINESIZE;
-+		}
-+	} while (!rsp->is_complete);
-+
-+	if (resp_buf)
-+		memcpy(resp_buf, scm_get_response_buffer(rsp), resp_len);
-+out:
-+	free_scm_command(cmd);
-+	return ret;
-+}
-+EXPORT_SYMBOL(scm_call);
-+
-+u32 scm_get_version(void)
-+{
-+	int context_id;
-+	static u32 version = -1;
-+	register u32 r0 asm("r0");
-+	register u32 r1 asm("r1");
-+
-+	if (version != -1)
-+		return version;
-+
-+	mutex_lock(&scm_lock);
-+
-+	r0 = 0x1 << 8;
-+	r1 = (u32)&context_id;
-+	do {
-+		asm volatile(
-+			__asmeq("%0", "r0")
-+			__asmeq("%1", "r1")
-+			__asmeq("%2", "r0")
-+			__asmeq("%3", "r1")
-+#ifdef REQUIRES_SEC
-+			".arch_extension sec\n"
-+#endif
-+			"smc	#0	@ switch to secure world\n"
-+			: "=r" (r0), "=r" (r1)
-+			: "r" (r0), "r" (r1)
-+			: "r2", "r3");
-+	} while (r0 == SCM_INTERRUPTED);
-+
-+	version = r1;
-+	mutex_unlock(&scm_lock);
-+
-+	return version;
-+}
-+EXPORT_SYMBOL(scm_get_version);
---- /dev/null
-+++ b/arch/arm/mach-qcom/scm.h
-@@ -0,0 +1,25 @@
-+/* Copyright (c) 2010, Code Aurora Forum. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+#ifndef __MACH_SCM_H
-+#define __MACH_SCM_H
-+
-+#define SCM_SVC_BOOT			0x1
-+#define SCM_SVC_PIL			0x2
-+
-+extern int scm_call(u32 svc_id, u32 cmd_id, const void *cmd_buf, size_t cmd_len,
-+		void *resp_buf, size_t resp_len);
-+
-+#define SCM_VERSION(major, minor) (((major) << 16) | ((minor) & 0xFF))
-+
-+extern u32 scm_get_version(void);
-+
-+#endif