diff options
author | Ansuel Smith <ansuelsmth@gmail.com> | 2021-11-05 01:14:57 +0100 |
---|---|---|
committer | Daniel Golle <daniel@makrotopia.org> | 2022-03-27 16:16:07 +0100 |
commit | 8cc2caed58e79ac24f9f5a075c6a12b07453c923 (patch) | |
tree | 81f9b034a969d85d0c8141c0ad989e317742ebac /target/linux/ipq806x/patches-5.15 | |
parent | 327677a71d74cc8230d54ecb63341347861fe065 (diff) | |
download | upstream-8cc2caed58e79ac24f9f5a075c6a12b07453c923.tar.gz upstream-8cc2caed58e79ac24f9f5a075c6a12b07453c923.tar.bz2 upstream-8cc2caed58e79ac24f9f5a075c6a12b07453c923.zip |
ipq806x: 5:15: add testing kernel version
Refresh patch for 5.15
Rework tweak patch to sync with upstream ipq8064 dtsi and fix
regression introduced.
Rename nand_controller to nand in every dts.
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
Diffstat (limited to 'target/linux/ipq806x/patches-5.15')
13 files changed, 259 insertions, 708 deletions
diff --git a/target/linux/ipq806x/patches-5.15/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch b/target/linux/ipq806x/patches-5.15/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch index b73218e71b..b56480deaa 100644 --- a/target/linux/ipq806x/patches-5.15/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch +++ b/target/linux/ipq806x/patches-5.15/0060-HACK-arch-arm-force-ZRELADDR-on-arch-qcom.patch @@ -33,7 +33,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org> --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -322,7 +322,7 @@ config ARCH_MULTIPLATFORM +@@ -321,7 +321,7 @@ config ARCH_MULTIPLATFORM select ARCH_SELECT_MEMORY_MODEL select ARM_HAS_SG_CHAIN select ARM_PATCH_PHYS_VIRT diff --git a/target/linux/ipq806x/patches-5.15/0067-generic-Mangle-bootloader-s-kernel-arguments.patch b/target/linux/ipq806x/patches-5.15/0067-generic-Mangle-bootloader-s-kernel-arguments.patch index 8f669319ed..06bfac2a7e 100644 --- a/target/linux/ipq806x/patches-5.15/0067-generic-Mangle-bootloader-s-kernel-arguments.patch +++ b/target/linux/ipq806x/patches-5.15/0067-generic-Mangle-bootloader-s-kernel-arguments.patch @@ -22,7 +22,7 @@ Signed-off-by: Adrian Panella <ianchi74@outlook.com> --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig -@@ -1781,6 +1781,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN +@@ -1780,6 +1780,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN The command-line arguments provided by the boot loader will be appended to the the device tree bootargs property. diff --git a/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch b/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch index 49ff218040..e943308433 100644 --- a/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch +++ b/target/linux/ipq806x/patches-5.15/0069-arm-boot-add-dts-files.patch @@ -10,7 +10,7 @@ Signed-off-by: John Crispin <john@phrozen.org> --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile -@@ -907,8 +907,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \ +@@ -955,8 +955,29 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-ipq4019-ap.dk04.1-c3.dtb \ qcom-ipq4019-ap.dk07.1-c1.dtb \ qcom-ipq4019-ap.dk07.1-c2.dtb \ @@ -32,11 +32,11 @@ Signed-off-by: John Crispin <john@phrozen.org> + qcom-ipq8064-wxr-2533dhp.dtb \ + qcom-ipq8065-nbg6817.dtb \ + qcom-ipq8065-r7800.dtb \ -+ qcom-ipq8065-rt4230w-rev6.dtb \ + qcom-ipq8065-xr500.dtb \ ++ qcom-ipq8065-rt4230w-rev6.dtb \ + qcom-ipq8068-ecw5410.dtb \ + qcom-ipq8068-mr42.dtb \ + qcom-ipq8068-mr52.dtb \ + qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb \ - qcom-msm8974-fairphone-fp2.dtb \ diff --git a/target/linux/ipq806x/patches-5.15/0072-add-ipq806x-with-no-clocks.patch b/target/linux/ipq806x/patches-5.15/0072-add-ipq806x-with-no-clocks.patch index 62bba1d72a..f0cda0ba8b 100644 --- a/target/linux/ipq806x/patches-5.15/0072-add-ipq806x-with-no-clocks.patch +++ b/target/linux/ipq806x/patches-5.15/0072-add-ipq806x-with-no-clocks.patch @@ -1,10 +1,10 @@ --- a/drivers/firmware/qcom_scm.c +++ b/drivers/firmware/qcom_scm.c -@@ -1275,6 +1275,7 @@ static const struct of_device_id qcom_sc +@@ -1339,6 +1339,7 @@ static const struct of_device_id qcom_sc SCM_HAS_BUS_CLK) }, { .compatible = "qcom,scm-ipq4019" }, + { .compatible = "qcom,scm-ipq806x" }, - { .compatible = "qcom,scm-msm8660", .data = (void *) SCM_HAS_CORE_CLK }, - { .compatible = "qcom,scm-msm8960", .data = (void *) SCM_HAS_CORE_CLK }, - { .compatible = "qcom,scm-msm8916", .data = (void *)(SCM_HAS_CORE_CLK | + { .compatible = "qcom,scm-mdm9607", .data = (void *)(SCM_HAS_CORE_CLK | + SCM_HAS_IFACE_CLK | + SCM_HAS_BUS_CLK) }, diff --git a/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch b/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch index d6a4593749..8393237218 100644 --- a/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch +++ b/target/linux/ipq806x/patches-5.15/082-ipq8064-dtsi-tweaks.patch @@ -1,33 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -20,7 +20,7 @@ - #address-cells = <1>; - #size-cells = <0>; - -- cpu@0 { -+ cpu0: cpu@0 { - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; - device_type = "cpu"; -@@ -30,7 +30,7 @@ - qcom,saw = <&saw0>; - }; - -- cpu@1 { -+ cpu1: cpu@1 { - compatible = "qcom,krait"; - enable-method = "qcom,kpss-acc-v1"; - device_type = "cpu"; -@@ -67,7 +67,7 @@ - no-map; - }; - -- smem@41000000 { -+ smem: smem@41000000 { - reg = <0x41000000 0x200000>; - no-map; - }; -@@ -128,6 +128,7 @@ +@@ -352,6 +352,7 @@ gpio-ranges = <&qcom_pinmux 0 0 69>; #gpio-cells = <2>; interrupt-controller; @@ -35,7 +8,7 @@ #interrupt-cells = <2>; interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>; -@@ -155,6 +156,7 @@ +@@ -379,6 +380,7 @@ function = "pcie3_rst"; drive-strength = <12>; bias-disable; @@ -43,7 +16,40 @@ }; }; -@@ -190,6 +192,7 @@ +@@ -411,12 +413,9 @@ + }; + + nand_pins: nand_pins { +- mux { ++ disable { + pins = "gpio34", "gpio35", "gpio36", +- "gpio37", "gpio38", "gpio39", +- "gpio40", "gpio41", "gpio42", +- "gpio43", "gpio44", "gpio45", +- "gpio46", "gpio47"; ++ "gpio37", "gpio38"; + function = "nand"; + drive-strength = <10>; + bias-disable; +@@ -424,6 +423,8 @@ + + pullups { + pins = "gpio39"; ++ function = "nand"; ++ drive-strength = <10>; + bias-pull-up; + }; + +@@ -431,6 +432,8 @@ + pins = "gpio40", "gpio41", "gpio42", + "gpio43", "gpio44", "gpio45", + "gpio46", "gpio47"; ++ function = "nand"; ++ drive-strength = <10>; + bias-bus-hold; + }; + }; +@@ -439,6 +442,7 @@ intc: interrupt-controller@2000000 { compatible = "qcom,msm-qgic2"; interrupt-controller; @@ -51,7 +57,7 @@ #interrupt-cells = <3>; reg = <0x02000000 0x1000>, <0x02002000 0x1000>; -@@ -219,21 +222,23 @@ +@@ -468,11 +472,13 @@ acc0: clock-controller@2088000 { compatible = "qcom,kpss-acc-v1"; reg = <0x02088000 0x1000>, <0x02008000 0x1000>; @@ -64,6 +70,10 @@ + clock-output-names = "acpu1_aux"; }; + adm_dma: dma-controller@18300000 { +@@ -496,13 +502,13 @@ + }; + saw0: regulator@2089000 { - compatible = "qcom,saw2"; + compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; @@ -77,16 +87,7 @@ reg = <0x02099000 0x1000>, <0x02009000 0x1000>; regulator; }; -@@ -251,7 +256,7 @@ - - syscon-tcsr = <&tcsr>; - -- serial@12490000 { -+ gsbi2_serial: serial@12490000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x12490000 0x1000>, - <0x12480000 0x1000>; -@@ -261,7 +266,7 @@ +@@ -533,7 +533,7 @@ status = "disabled"; }; @@ -95,35 +96,20 @@ compatible = "qcom,i2c-qup-v1.1.1"; reg = <0x124a0000 0x1000>; interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>; -@@ -326,7 +331,7 @@ - - syscon-tcsr = <&tcsr>; - -- serial@1a240000 { -+ gsbi5_serial: serial@1a240000 { - compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; - reg = <0x1a240000 0x1000>, - <0x1a200000 0x1000>; -@@ -397,7 +402,7 @@ - status = "disabled"; - }; - -- sata@29000000 { -+ sata: sata@29000000 { - compatible = "qcom,ipq806x-ahci", "generic-ahci"; - reg = <0x29000000 0x180>; - -@@ -430,13 +435,35 @@ - reg = <0x00700000 0x1000>; - #address-cells = <1>; - #size-cells = <1>; -+ -+ tsens_calib: calib@400 { -+ reg = <0x400 0xb>; -+ }; -+ tsens_backup: backup@410 { -+ reg = <0x410 0xb>; -+ }; +@@ -676,9 +682,6 @@ + compatible = "qcom,ipq806x-nand"; + reg = <0x1ac00000 0x800>; + +- pinctrl-0 = <&nand_pins>; +- pinctrl-names = "default"; +- + clocks = <&gcc EBI2_CLK>, + <&gcc EBI2_AON_CLK>; + clock-names = "core", "aon"; +@@ -733,10 +736,13 @@ + tsens_calib_backup: calib_backup@410 { + reg = <0x410 0xb>; + }; + speedbin_efuse: speedbin@0c0 { + reg = <0x0c0 0x4>; + }; @@ -135,22 +121,53 @@ reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; -+ #power-domain-cells = <1>; +@@ -768,10 +774,45 @@ + clocks = <&gcc RPM_MSG_RAM_H_CLK>; + clock-names = "ram"; + ++ #address-cells = <1>; ++ #size-cells = <0>; ++ + rpmcc: clock-controller { + compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; + #clock-cells = <1>; + }; ++ ++ regulators { ++ compatible = "qcom,rpm-smb208-regulators"; ++ ++ smb208_s1a: s1a { ++ regulator-min-microvolt = <1050000>; ++ regulator-max-microvolt = <1150000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; + -+ tsens: thermal-sensor@900000 { -+ compatible = "qcom,ipq8064-tsens"; ++ smb208_s1b: s1b { ++ regulator-min-microvolt = <1050000>; ++ regulator-max-microvolt = <1150000>; + -+ nvmem-cells = <&tsens_calib>, <&tsens_backup>; -+ nvmem-cell-names = "calib", "calib_backup"; -+ interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "uplow"; -+ #thermal-sensor-cells = <1>; -+ #qcom,sensors = <11>; ++ qcom,switch-mode-frequency = <1200000>; ++ }; ++ ++ smb208_s2a: s2a { ++ regulator-min-microvolt = < 800000>; ++ regulator-max-microvolt = <1250000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; ++ ++ smb208_s2b: s2b { ++ regulator-min-microvolt = < 800000>; ++ regulator-max-microvolt = <1250000>; ++ ++ qcom,switch-mode-frequency = <1200000>; ++ }; + }; }; tcsr: syscon@1a400000 { -@@ -622,7 +649,7 @@ +@@ -965,7 +1006,7 @@ gmac0: ethernet@37000000 { device_type = "network"; @@ -159,7 +176,7 @@ reg = <0x37000000 0x200000>; interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; -@@ -645,7 +672,7 @@ +@@ -989,7 +1030,7 @@ gmac1: ethernet@37200000 { device_type = "network"; @@ -168,7 +185,7 @@ reg = <0x37200000 0x200000>; interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; -@@ -668,7 +695,7 @@ +@@ -1013,7 +1054,7 @@ gmac2: ethernet@37400000 { device_type = "network"; @@ -177,7 +194,7 @@ reg = <0x37400000 0x200000>; interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; -@@ -691,7 +718,7 @@ +@@ -1037,7 +1078,7 @@ gmac3: ethernet@37600000 { device_type = "network"; @@ -186,24 +203,34 @@ reg = <0x37600000 0x200000>; interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; -@@ -740,13 +767,13 @@ - qcom,ee = <0>; +@@ -1050,8 +1050,6 @@ + clocks = <&gcc USB30_0_UTMI_CLK>; + clock-names = "ref"; + #phy-cells = <0>; +- +- status = "disabled"; + }; + + ss_phy_0: usb3phy@100f8830 { +@@ -1055,8 +1055,6 @@ + clocks = <&gcc USB30_0_MASTER_CLK>; + clock-names = "ref"; + #phy-cells = <0>; +- +- status = "disabled"; }; -- amba { + usb3_0: usb3@100f8800 { +@@ -1176,7 +1217,7 @@ + }; + + amba: amba { - compatible = "simple-bus"; -+ amba: amba { + compatible = "arm,amba-bus"; #address-cells = <1>; #size-cells = <1>; ranges; - -- sdcc@12400000 { -+ sdcc1: sdcc@12400000 { - status = "disabled"; - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; -@@ -760,13 +787,12 @@ +@@ -1195,7 +1236,6 @@ non-removable; cap-sd-highspeed; cap-mmc-highspeed; @@ -211,10 +238,3 @@ vmmc-supply = <&vsdcc_fixed>; dmas = <&sdcc1bam 2>, <&sdcc1bam 1>; dma-names = "tx", "rx"; - }; - -- sdcc@12180000 { -+ sdcc3: sdcc@12180000 { - compatible = "arm,pl18x", "arm,primecell"; - arm,primecell-periphid = <0x00051180>; - status = "disabled"; diff --git a/target/linux/ipq806x/patches-5.15/083-ipq8064-dtsi-additions.patch b/target/linux/ipq806x/patches-5.15/083-ipq8064-dtsi-additions.patch index 2667bd636e..a85f8ac818 100644 --- a/target/linux/ipq806x/patches-5.15/083-ipq8064-dtsi-additions.patch +++ b/target/linux/ipq806x/patches-5.15/083-ipq8064-dtsi-additions.patch @@ -1,6 +1,6 @@ --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi -@@ -8,6 +8,8 @@ +@@ -10,6 +10,8 @@ #include <dt-bindings/reset/qcom,gcc-ipq806x.h> #include <dt-bindings/soc/qcom,gsbi.h> #include <dt-bindings/interrupt-controller/arm-gic.h> @@ -9,7 +9,7 @@ / { #address-cells = <1>; -@@ -28,6 +30,16 @@ +@@ -30,6 +32,16 @@ next-level-cache = <&L2>; qcom,acc = <&acc0>; qcom,saw = <&saw0>; @@ -26,7 +26,7 @@ }; cpu1: cpu@1 { -@@ -38,14 +50,350 @@ +@@ -40,11 +52,125 @@ next-level-cache = <&L2>; qcom,acc = <&acc1>; qcom,saw = <&saw1>; @@ -155,232 +155,7 @@ }; }; -+ thermal-zones { -+ tsens_tz_sensor0 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 0>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor1 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 1>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor2 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 2>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor3 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 3>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor4 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 4>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor5 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 5>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor6 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 6>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor7 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 7>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor8 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 8>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor9 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 9>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ -+ tsens_tz_sensor10 { -+ polling-delay-passive = <0>; -+ polling-delay = <0>; -+ thermal-sensors = <&tsens 10>; -+ -+ trips { -+ cpu-critical { -+ temperature = <105000>; -+ hysteresis = <2000>; -+ type = "critical"; -+ }; -+ -+ cpu-hot { -+ temperature = <95000>; -+ hysteresis = <2000>; -+ type = "hot"; -+ }; -+ }; -+ }; -+ }; -+ - memory { - device_type = "memory"; - reg = <0x0 0x0>; -@@ -93,6 +441,15 @@ +@@ -317,6 +443,15 @@ }; }; @@ -396,86 +171,7 @@ firmware { scm { compatible = "qcom,scm-ipq806x", "qcom,scm"; -@@ -120,6 +477,78 @@ - reg-names = "lpass-lpaif"; - }; - -+ L2: l2-cache { -+ compatible = "qcom,krait-cache", "cache"; -+ cache-level = <2>; -+ qcom,saw = <&saw_l2>; -+ -+ clocks = <&kraitcc 4>; -+ clock-names = "l2"; -+ l2-supply = <&smb208_s1a>; -+ operating-points-v2 = <&opp_table_l2>; -+ }; -+ -+ rpm: rpm@108000 { -+ compatible = "qcom,rpm-ipq8064"; -+ reg = <0x108000 0x1000>; -+ qcom,ipc = <&l2cc 0x8 2>; -+ -+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>, -+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>; -+ interrupt-names = "ack", "err", "wakeup"; -+ -+ clocks = <&gcc RPM_MSG_RAM_H_CLK>; -+ clock-names = "ram"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ rpmcc: clock-controller { -+ compatible = "qcom,rpmcc-ipq806x", "qcom,rpmcc"; -+ #clock-cells = <1>; -+ }; -+ -+ regulators { -+ compatible = "qcom,rpm-smb208-regulators"; -+ -+ smb208_s1a: s1a { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s1b: s1b { -+ regulator-min-microvolt = <1050000>; -+ regulator-max-microvolt = <1150000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2a: s2a { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ -+ smb208_s2b: s2b { -+ regulator-min-microvolt = < 800000>; -+ regulator-max-microvolt = <1250000>; -+ -+ qcom,switch-mode-frequency = <1200000>; -+ }; -+ }; -+ }; -+ -+ rng@1a500000 { -+ compatible = "qcom,prng"; -+ reg = <0x1a500000 0x200>; -+ clocks = <&gcc PRNG_CLK>; -+ clock-names = "core"; -+ }; -+ - qcom_pinmux: pinmux@800000 { - compatible = "qcom,ipq8064-pinctrl"; - reg = <0x800000 0x4000>; -@@ -160,6 +589,15 @@ +@@ -384,6 +519,15 @@ }; }; @@ -491,35 +187,10 @@ spi_pins: spi_pins { mux { pins = "gpio18", "gpio19", "gpio21"; -@@ -169,6 +607,53 @@ +@@ -437,6 +581,27 @@ + bias-bus-hold; }; }; - -+ nand_pins: nand_pins { -+ disable { -+ pins = "gpio34", "gpio35", "gpio36", -+ "gpio37", "gpio38"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-disable; -+ }; -+ -+ pullups { -+ pins = "gpio39"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-pull-up; -+ }; -+ -+ hold { -+ pins = "gpio40", "gpio41", "gpio42", -+ "gpio43", "gpio44", "gpio45", -+ "gpio46", "gpio47"; -+ function = "nand"; -+ drive-strength = <10>; -+ bias-bus-hold; -+ }; -+ }; + + mdio0_pins: mdio0_pins { + mux { @@ -541,29 +212,10 @@ + bias-disable; + }; + }; -+ - leds_pins: leds_pins { - mux { - pins = "gpio7", "gpio8", "gpio9", -@@ -231,6 +716,17 @@ - clock-output-names = "acpu1_aux"; }; -+ l2cc: clock-controller@2011000 { -+ compatible = "qcom,kpss-gcc", "syscon"; -+ reg = <0x2011000 0x1000>; -+ clock-output-names = "acpu_l2_aux"; -+ }; -+ -+ kraitcc: clock-controller { -+ compatible = "qcom,krait-cc-v1"; -+ #clock-cells = <1>; -+ }; -+ - saw0: regulator@2089000 { - compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon"; - reg = <0x02089000 0x1000>, <0x02009000 0x1000>; -@@ -243,6 +739,52 @@ + intc: interrupt-controller@2000000 { +@@ -513,6 +678,17 @@ regulator; }; @@ -578,45 +230,10 @@ + reg = <0x12100000 0x10000>; + }; + -+ gsbi1: gsbi@12440000 { -+ compatible = "qcom,gsbi-v1.0.0"; -+ cell-index = <1>; -+ reg = <0x12440000 0x100>; -+ clocks = <&gcc GSBI1_H_CLK>; -+ clock-names = "iface"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ status = "disabled"; -+ -+ syscon-tcsr = <&tcsr>; -+ -+ gsbi1_serial: serial@12450000 { -+ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; -+ reg = <0x12450000 0x100>, -+ <0x12400000 0x03>; -+ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; -+ clock-names = "core", "iface"; -+ status = "disabled"; -+ }; -+ -+ gsbi1_i2c: i2c@12460000 { -+ compatible = "qcom,i2c-qup-v1.1.1"; -+ reg = <0x12460000 0x1000>; -+ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; -+ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; -+ clock-names = "core", "iface"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ status = "disabled"; -+ }; -+ }; -+ gsbi2: gsbi@12480000 { compatible = "qcom,gsbi-v1.0.0"; cell-index = <2>; -@@ -368,6 +910,33 @@ +@@ -568,6 +910,33 @@ }; }; @@ -650,7 +267,7 @@ gsbi7: gsbi@16600000 { status = "disabled"; compatible = "qcom,gsbi-v1.0.0"; -@@ -389,6 +958,19 @@ +@@ -589,6 +958,19 @@ clock-names = "core", "iface"; status = "disabled"; }; @@ -670,144 +287,52 @@ }; sata_phy: sata-phy@1b400000 { -@@ -478,6 +1060,95 @@ - #reset-cells = <1>; +@@ -761,6 +937,17 @@ + }; }; -+ sfpb_mutex_block: syscon@1200600 { -+ compatible = "syscon"; -+ reg = <0x01200600 0x100>; -+ }; -+ -+ hs_phy_0: hs_phy_0 { -+ compatible = "qcom,ipq806x-usb-phy-hs"; -+ reg = <0x110f8800 0x30>; -+ clocks = <&gcc USB30_0_UTMI_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; -+ }; -+ -+ ss_phy_0: ss_phy_0 { -+ compatible = "qcom,ipq806x-usb-phy-ss"; -+ reg = <0x110f8830 0x30>; -+ clocks = <&gcc USB30_0_MASTER_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; -+ }; -+ -+ usb3_0: usb3@110f8800 { -+ compatible = "qcom,dwc3", "syscon"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0x110f8800 0x8000>; -+ clocks = <&gcc USB30_0_MASTER_CLK>; -+ clock-names = "core"; -+ -+ ranges; -+ -+ resets = <&gcc USB30_0_MASTER_RESET>; -+ reset-names = "master"; -+ -+ status = "disabled"; -+ -+ dwc3_0: dwc3@11000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x11000000 0xcd00>; -+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&hs_phy_0>, <&ss_phy_0>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ snps,dis_u3_susphy_quirk; -+ }; -+ }; ++ L2: l2-cache { ++ compatible = "qcom,krait-cache", "cache"; ++ cache-level = <2>; ++ qcom,saw = <&saw_l2>; + -+ hs_phy_1: hs_phy_1 { -+ compatible = "qcom,ipq806x-usb-phy-hs"; -+ reg = <0x100f8800 0x30>; -+ clocks = <&gcc USB30_1_UTMI_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; ++ clocks = <&kraitcc 4>; ++ clock-names = "l2"; ++ l2-supply = <&smb208_s1a>; ++ operating-points-v2 = <&opp_table_l2>; + }; + -+ ss_phy_1: ss_phy_1 { -+ compatible = "qcom,ipq806x-usb-phy-ss"; -+ reg = <0x100f8830 0x30>; -+ clocks = <&gcc USB30_1_MASTER_CLK>; -+ clock-names = "ref"; -+ #phy-cells = <0>; + rpm: rpm@108000 { + compatible = "qcom,rpm-ipq8064"; + reg = <0x108000 0x1000>; +@@ -828,6 +1015,11 @@ + clock-output-names = "acpu_l2_aux"; + }; + ++ kraitcc: clock-controller { ++ compatible = "qcom,krait-cc-v1"; ++ #clock-cells = <1>; + }; + -+ usb3_1: usb3@100f8800 { -+ compatible = "qcom,dwc3", "syscon"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ reg = <0x100f8800 0x8000>; -+ clocks = <&gcc USB30_1_MASTER_CLK>; -+ clock-names = "core"; -+ -+ ranges; -+ -+ resets = <&gcc USB30_1_MASTER_RESET>; -+ reset-names = "master"; -+ -+ status = "disabled"; -+ -+ dwc3_1: dwc3@10000000 { -+ compatible = "snps,dwc3"; -+ reg = <0x10000000 0xcd00>; -+ interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>; -+ phys = <&hs_phy_1>, <&ss_phy_1>; -+ phy-names = "usb2-phy", "usb3-phy"; -+ dr_mode = "host"; -+ snps,dis_u3_susphy_quirk; -+ }; + lcc: clock-controller@28000000 { + compatible = "qcom,lcc-ipq8064"; + reg = <0x28000000 0x1000>; +@@ -835,6 +1027,11 @@ + #reset-cells = <1>; + }; + ++ sfpb_mutex_block: syscon@1200600 { ++ compatible = "syscon"; ++ reg = <0x01200600 0x100>; + }; + pcie0: pci@1b500000 { compatible = "qcom,pcie-ipq8064"; reg = <0x1b500000 0x1000 -@@ -739,6 +1410,59 @@ - status = "disabled"; +@@ -1188,6 +1385,21 @@ + }; }; -+ adm_dma: dma@18300000 { -+ compatible = "qcom,adm"; -+ reg = <0x18300000 0x100000>; -+ interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>; -+ #dma-cells = <1>; -+ -+ clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>; -+ clock-names = "core", "iface"; -+ -+ resets = <&gcc ADM0_RESET>, -+ <&gcc ADM0_PBUS_RESET>, -+ <&gcc ADM0_C0_RESET>, -+ <&gcc ADM0_C1_RESET>, -+ <&gcc ADM0_C2_RESET>; -+ reset-names = "clk", "pbus", "c0", "c1", "c2"; -+ qcom,ee = <0>; -+ -+ status = "disabled"; -+ }; -+ -+ nand_controller: nand-controller@1ac00000 { -+ compatible = "qcom,ipq806x-nand"; -+ reg = <0x1ac00000 0x800>; -+ -+ clocks = <&gcc EBI2_CLK>, -+ <&gcc EBI2_AON_CLK>; -+ clock-names = "core", "aon"; -+ -+ dmas = <&adm_dma 3>; -+ dma-names = "rxtx"; -+ qcom,cmd-crci = <15>; -+ qcom,data-crci = <3>; -+ -+ status = "disabled"; -+ -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; + + mdio0: mdio@37000000 { + #address-cells = <1>; @@ -826,7 +351,7 @@ vsdcc_fixed: vsdcc-regulator { compatible = "regulator-fixed"; regulator-name = "SDCC Power"; -@@ -814,4 +1538,17 @@ +@@ -1262,4 +1474,17 @@ }; }; }; diff --git a/target/linux/ipq806x/patches-5.15/084-ipq8064-v1.0-dtsi-cleanup.patch b/target/linux/ipq806x/patches-5.15/084-ipq8064-v1.0-dtsi-cleanup.patch index e5ea8e6393..44323a1561 100644 --- a/target/linux/ipq806x/patches-5.15/084-ipq8064-v1.0-dtsi-cleanup.patch +++ b/target/linux/ipq806x/patches-5.15/084-ipq8064-v1.0-dtsi-cleanup.patch @@ -24,7 +24,7 @@ them differently anyway. }; @@ -64,64 +54,5 @@ ports-implemented = <0x1>; - status = "ok"; + status = "okay"; }; - - gpio_keys { diff --git a/target/linux/ipq806x/patches-5.15/086-ipq8064-fix-duplicate-node.patch b/target/linux/ipq806x/patches-5.15/086-ipq8064-fix-duplicate-node.patch index 747fa8c019..e4aefe171a 100644 --- a/target/linux/ipq806x/patches-5.15/086-ipq8064-fix-duplicate-node.patch +++ b/target/linux/ipq806x/patches-5.15/086-ipq8064-fix-duplicate-node.patch @@ -74,8 +74,8 @@ mdio1: mdio-1 { status = "okay"; compatible = "virtual,mdio-gpio"; -@@ -216,6 +149,68 @@ - }; +@@ -220,6 +153,68 @@ + status = "okay"; }; +&mdio0 { diff --git a/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch b/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch index 769686220b..f579b73b77 100644 --- a/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch +++ b/target/linux/ipq806x/patches-5.15/098-1-cpufreq-add-Krait-dedicated-scaling-driver.patch @@ -436,7 +436,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> +} + +static struct cpufreq_driver krait_cpufreq_driver = { -+ .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK | ++ .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK | + CPUFREQ_IS_COOLING_DEV, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = set_target, diff --git a/target/linux/ipq806x/patches-5.15/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch b/target/linux/ipq806x/patches-5.15/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch index 6106dfb8dc..f71b5cd4b0 100644 --- a/target/linux/ipq806x/patches-5.15/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch +++ b/target/linux/ipq806x/patches-5.15/099-1-mtd-nand-raw-qcom_nandc-add-boot_layout_mode-support.patch @@ -52,10 +52,10 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> }; /* -@@ -460,12 +475,14 @@ struct qcom_nand_host { - * @ecc_modes - ecc mode for NAND +@@ -475,13 +490,15 @@ struct qcom_nand_host { * @is_bam - whether NAND controller is using BAM * @is_qpic - whether NAND CTRL is part of qpic IP + * @qpic_v2 - flag to indicate QPIC IP version 2 + * @has_boot_pages - whether NAND has different ecc settings for boot pages * @dev_cmd_reg_start - NAND_DEV_CMD_* registers starting offset */ @@ -63,6 +63,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> u32 ecc_modes; bool is_bam; bool is_qpic; + bool qpic_v2; + bool has_boot_pages; u32 dev_cmd_reg_start; }; @@ -71,8 +72,8 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); oob_size1 = host->bbm_size; -- if (cw == (ecc->steps - 1)) { -+ if (cw == (ecc->steps - 1) && !host->boot_pages_conf) { +- if (qcom_nandc_is_last_cw(ecc, cw)) { ++ if (qcom_nandc_is_last_cw(ecc, cw) && !host->boot_pages_conf) { data_size2 = ecc->size - data_size1 - ((ecc->steps - 1) * 4); oob_size2 = (ecc->steps * 4) + host->ecc_bytes_hw + @@ -80,8 +81,8 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> } for_each_set_bit(cw, &uncorrectable_cws, ecc->steps) { -- if (cw == (ecc->steps - 1)) { -+ if (cw == (ecc->steps - 1) && !host->boot_pages_conf) { +- if (qcom_nandc_is_last_cw(ecc, cw)) { ++ if (qcom_nandc_is_last_cw(ecc, cw) && !host->boot_pages_conf) { data_size = ecc->size - ((ecc->steps - 1) * 4); oob_size = (ecc->steps * 4) + host->ecc_bytes_hw; } else { @@ -89,8 +90,8 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; -- if (i == (ecc->steps - 1)) { -+ if (i == (ecc->steps - 1) && !host->boot_pages_conf) { +- if (qcom_nandc_is_last_cw(ecc, i)) { ++ if (qcom_nandc_is_last_cw(ecc, i) && !host->boot_pages_conf) { data_size = ecc->size - ((ecc->steps - 1) << 2); oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + host->spare_bytes; @@ -169,8 +170,8 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> for (i = 0; i < ecc->steps; i++) { int data_size, oob_size; -- if (i == (ecc->steps - 1)) { -+ if (i == (ecc->steps - 1) && !host->boot_pages_conf) { +- if (qcom_nandc_is_last_cw(ecc, i)) { ++ if (qcom_nandc_is_last_cw(ecc, i) && !host->boot_pages_conf) { data_size = ecc->size - ((ecc->steps - 1) << 2); oob_size = (ecc->steps << 2) + host->ecc_bytes_hw + host->spare_bytes; @@ -188,8 +189,8 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> data_size1 = mtd->writesize - host->cw_size * (ecc->steps - 1); oob_size1 = host->bbm_size; -- if (i == (ecc->steps - 1)) { -+ if (i == (ecc->steps - 1) && !host->boot_pages_conf) { +- if (qcom_nandc_is_last_cw(ecc, i)) { ++ if (qcom_nandc_is_last_cw(ecc, i) && !host->boot_pages_conf) { data_size2 = ecc->size - data_size1 - ((ecc->steps - 1) << 2); oob_size2 = (ecc->steps << 2) + host->ecc_bytes_hw + diff --git a/target/linux/ipq806x/patches-5.15/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch b/target/linux/ipq806x/patches-5.15/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch index 79036cb057..c4c7dc7d6a 100644 --- a/target/linux/ipq806x/patches-5.15/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch +++ b/target/linux/ipq806x/patches-5.15/099-2-Documentation-devicetree-mtd-qcom_nandc-document-qco.patch @@ -9,34 +9,32 @@ read/write confituation to boots partitions. Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com> --- - Documentation/devicetree/bindings/mtd/qcom_nandc.txt | 11 +++++++++++ + Documentation/devicetree/bindings/mtd/qcom,nandc.yaml | 11 +++++++++++ 1 file changed, 11 insertions(+) ---- a/Documentation/devicetree/bindings/mtd/qcom_nandc.txt -+++ b/Documentation/devicetree/bindings/mtd/qcom_nandc.txt -@@ -52,6 +52,15 @@ Optional properties: - be used according to chip requirement and available - OOB size. - -+EBI2 specific properties: -+- nand-is-boot-medium: nand contains boot partitions and different ecc configuration -+ should be used for these partitions. -+- qcom,boot_pages_size: should contain the size of the total boot partitions -+ where the boot layout read/write specific configuration -+ should be used. The boot layout is considered from the -+ start of the nand to the value set in this binding. -+ Only used in combination with 'nand-is-boot-medium'. +--- a/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml ++++ b/Documentation/devicetree/bindings/mtd/qcom,nandc.yaml +@@ -77,6 +77,14 @@ Optional properties: + description: + Must contain the ADM data type CRCI block instance number + specified for the NAND controller on the given platform + - Each nandcs device node may optionally contain a 'partitions' sub-node, which - further contains sub-nodes describing the flash partition mapping. See - partition.txt for more detail. -@@ -80,6 +89,9 @@ nand-controller@1ac00000 { - nand-ecc-strength = <4>; - nand-bus-width = <8>; ++ qcom,boot_pages_size: ++ description: ++ Should contain the size of the total boot partitions ++ where the boot layout read/write specific configuration ++ should be used. The boot layout is considered from the ++ start of the nand to the value set in this binding. ++ Only used in combination with 'nand-is-boot-medium'. + + - if: + properties: +@@ -135,6 +135,9 @@ nand-controller@1ac00000 { + nand-ecc-strength = <4>; + nand-bus-width = <8>; -+ nand-is-boot-medium; -+ qcom,boot_pages_size: <0x58a0000>; ++ nand-is-boot-medium; ++ qcom,boot_pages_size: <0x58a0000>; + - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; + partitions { + compatible = "fixed-partitions"; diff --git a/target/linux/ipq806x/patches-5.15/851-add-gsbi1-dts.patch b/target/linux/ipq806x/patches-5.15/851-add-gsbi1-dts.patch new file mode 100644 index 0000000000..b7c198c126 --- /dev/null +++ b/target/linux/ipq806x/patches-5.15/851-add-gsbi1-dts.patch @@ -0,0 +1,44 @@ +--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi ++++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi +@@ -689,6 +689,41 @@ + reg = <0x12100000 0x10000>; + }; + ++ gsbi1: gsbi@12440000 { ++ compatible = "qcom,gsbi-v1.0.0"; ++ cell-index = <1>; ++ reg = <0x12440000 0x100>; ++ clocks = <&gcc GSBI1_H_CLK>; ++ clock-names = "iface"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ranges; ++ status = "disabled"; ++ ++ syscon-tcsr = <&tcsr>; ++ ++ gsbi1_serial: serial@12450000 { ++ compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm"; ++ reg = <0x12450000 0x100>, ++ <0x12400000 0x03>; ++ interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>; ++ clock-names = "core", "iface"; ++ status = "disabled"; ++ }; ++ ++ gsbi1_i2c: i2c@12460000 { ++ compatible = "qcom,i2c-qup-v1.1.1"; ++ reg = <0x12460000 0x1000>; ++ interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>; ++ clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>; ++ clock-names = "core", "iface"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ status = "disabled"; ++ }; ++ }; ++ + gsbi2: gsbi@12480000 { + compatible = "qcom,gsbi-v1.0.0"; + cell-index = <2>; diff --git a/target/linux/ipq806x/patches-5.15/900-arm-add-cmdline-override.patch b/target/linux/ipq806x/patches-5.15/900-arm-add-cmdline-override.patch deleted file mode 100644 index dba917872c..0000000000 --- a/target/linux/ipq806x/patches-5.15/900-arm-add-cmdline-override.patch +++ /dev/null @@ -1,37 +0,0 @@ ---- a/arch/arm/Kconfig -+++ b/arch/arm/Kconfig -@@ -1794,6 +1794,14 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGL - - endchoice - -+config CMDLINE_OVERRIDE -+ bool "Use alternative cmdline from device tree" -+ help -+ Some bootloaders may have uneditable bootargs. While CMDLINE_FORCE can -+ be used, this is not a good option for kernels that are shared across -+ devices. This setting enables using "chosen/cmdline-override" as the -+ cmdline if it exists in the device tree. -+ - config CMDLINE - string "Default kernel command string" - default "" ---- a/drivers/of/fdt.c -+++ b/drivers/of/fdt.c -@@ -1059,6 +1059,17 @@ int __init early_init_dt_scan_chosen(uns - if (p != NULL && l > 0) - strlcat(data, p, min_t(int, strlen(data) + (int)l, COMMAND_LINE_SIZE)); - -+ /* CONFIG_CMDLINE_OVERRIDE is used to fallback to a different -+ * device tree option of chosen/bootargs-override. This is -+ * helpful on boards where u-boot sets bootargs, and is unable -+ * to be modified. -+ */ -+#ifdef CONFIG_CMDLINE_OVERRIDE -+ p = of_get_flat_dt_prop(node, "bootargs-override", &l); -+ if (p != NULL && l > 0) -+ strlcpy(data, p, min((int)l, COMMAND_LINE_SIZE)); -+#endif -+ - /* - * CONFIG_CMDLINE is meant to be a default in case nothing else - * managed to set the command line, unless CONFIG_CMDLINE_FORCE |