aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/patches-5.10
diff options
context:
space:
mode:
authorShane Synan <digitalcircuit36939@gmail.com>2021-12-03 15:46:36 -0500
committerHauke Mehrtens <hauke@hauke-m.de>2021-12-05 18:49:14 +0100
commit9f0575a13023c1edbb1518304b25ecab7d34cd58 (patch)
treec574f7d5d6491bbee19e312a38cba50418ea0534 /target/linux/ipq806x/patches-5.10
parenteddb51392a640cd013ae26873eb22527b2dbae3a (diff)
downloadupstream-9f0575a13023c1edbb1518304b25ecab7d34cd58.tar.gz
upstream-9f0575a13023c1edbb1518304b25ecab7d34cd58.tar.bz2
upstream-9f0575a13023c1edbb1518304b25ecab7d34cd58.zip
ipq806x: revert SDC clock changes for NBG6817 MMC
Revert the SDC "CLK_SET_RATE_GATE" changes to the SDC clock regulator structures. See https://elinux.org/images/b/b8/Elc2013_Clement.pdf > if ((clk->flags & CLK_SET_RATE_GATE) && clk->prepare_count) { > > For this particular clock, setting its rate is possible only if the > clock is ungated (not yet prepared) This fixes the MMC failing to initialize on newer ZyXEL NBG6817 hardware revisions with Kingston MMC. Older revisions should hopefully be unaffected. Check MMC hardware details with: cd /sys/block/mmcblk0/device/ && \ tail -v cid date name manfid fwrev hwrev oemid rev Known problematic MMC names (broken before this commit): * M62704 (dated 12/2018) via myself * M62704 (dated 11/2018) via Drake Stefani Known unaffected MMC names (already working without this commit): * S10004 (dated 12/2015) via slh Without enabling dynamic debugging, this error manifests in the kernel hardware serial console as the following: [ 2.746605] mmc0: error -110 whilst initialising MMC card […trimmed other messages…] [ 2.877832] Waiting for root device /dev/mmcblk0p5... Enabling Linux dynamic kernel debugging provides additional messages. For guidance, see the Linux kernel documentation: https://www.kernel.org/doc/html/latest/admin-guide/dynamic-debug-howto.html First, enable dynamic debugging in OpenWRT's configuration: 1. Run "make menuconfig" 2. Select "Global build settings --->" 3. Select "Kernel build options --->" 4. Enable "Compile the kernel with dynamic printk" via spacebar 5. Save and exit (arrow key to "Exit" until prompted to save, save) Alternatively, set "CONFIG_KERNEL_DYNAMIC_DEBUG=y" in your .config. Then, turn on dynamic debugging at boot: Modify bootargs in target/linux/ipq806x/files/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts to add… bootargs = "[…existing bootargs…] dyndbg=\"file drivers/mmc/* +p\" dynamic_debug.verbose=1 loglevel=8"; For example: chosen { - bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1"; + bootargs = "rootfstype=squashfs,ext4 rootwait noinitrd fstools_ignore_partname=1 dyndbg=\"file drivers/mmc/* +p\" dynamic_debug.verbose=1 loglevel=8"; append-rootblock = "root=/dev/mmcblk0p"; Then, compile and flash the resulting build. If you are testing before this commit on newer MMC hardware, be prepared to recover! NOTE: If you have hardware serial console access, you don't need to use TFTP recovery to change the active boot partition. Reboot to working alternative partition via serial console: 1. Connect to hardware serial console * See https://openwrt.org/toh/zyxel/nbg6817#serial 2. Interrupt boot at "Hit any key to stop autoboot:" 3. Run "ATSE NBG6817" 4. Copy the result (e.g. "001976FE4B04") * Changes with **every boot** - can't reuse this 5. On your local system, run "./zyxel-uboot-password-tool.sh <copied value here>" * Example: "./zyxel-uboot-password-tool.sh 001976FE4B04" 6. Run the command provided by the password tool * Example: "ATEN 1,910F129B" * Changes with **every boot** - can't reuse this 7. Run "ATGU" * You now have full u-boot shell until next boot - unlocking is not remembered 8. Run either "run boot_mmc" (for booting partition set "FF") or "run boot_mmc_1" (for booting partition set "01") * These commands are not affected by dual-boot partition flags NOTE: This will NOT set the dual-boot partition flag. You'll need to fix that manually. The "nbg6817-dualboot" script may help: https://github.com/pkgadd/nbg6817/blob/master/nbg6817-dualboot zyxel-uboot-password-tool.sh - sourced from commit 459c8c9ef816156107e297964d088ddee2b4eef5: ror32() { echo $(( ($1 >> $2) | (($1 << (32 - $2) & (2**32-1)) ) )) } v="0x$1" a="0x${v:2:6}" b=$(( a + 0x10F0A563)) c=$(( 0x${v:12:14} & 7 )) p=$(( $(ror32 $b $c) ^ a )) printf "ATEN 1,%X\n" $p Kernel serial console log BEFORE commit with dynamic debug enabled: […trimmed…] [ 3.171343] mmci-pl18x 12400000.sdcc: designer ID = 0x51 [ 3.171397] mmci-pl18x 12400000.sdcc: revision = 0x0 [ 3.175811] mmci-pl18x 12400000.sdcc: clocking block at 96000000 Hz [ 3.181134] mmci-pl18x 12400000.sdcc: No vqmmc regulator found [ 3.186788] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 41,0 (pio) [ 3.192902] mmci-pl18x 12400000.sdcc: DMA channels RX dma1chan1, TX dma1chan2 [ 3.215609] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 1 timing 0 [ 3.227532] mmci-pl18x 12400000.sdcc: Initial signal voltage of 3.3v [ 3.247518] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 […trimmed…] [ 3.997725] mmc0: req done (CMD2): -110: 00000000 00000000 00000000 00000000 [ 4.003631] mmci-pl18x 12400000.sdcc: irq0 (data+cmd) 00000000 [ 4.003659] mmc0: error -110 whilst initialising MMC card [ 4.016481] mmc0: clock 0Hz busmode 2 powermode 0 cs 0 Vdd 0 width 1 timing 0 Notice how the initial clock is 52 MHz, which is incorrect - MMC requires negotiation to enable higher speeds. Kernel serial console log AFTER commit with dynamic debug enabled: […trimmed…] [ 3.168996] mmci-pl18x 12400000.sdcc: designer ID = 0x51 [ 3.169051] mmci-pl18x 12400000.sdcc: revision = 0x0 [ 3.173492] mmci-pl18x 12400000.sdcc: clocking block at 96000000 Hz [ 3.178808] mmci-pl18x 12400000.sdcc: No vqmmc regulator found [ 3.184702] mmci-pl18x 12400000.sdcc: mmc0: PL180 manf 51 rev0 at 0x12400000 irq 41,0 (pio) [ 3.190573] mmci-pl18x 12400000.sdcc: DMA channels RX dma1chan1, TX dma1chan2 [ 3.217873] mmc0: clock 0Hz busmode 2 powermode 1 cs 0 Vdd 21 width 1 timing 0 [ 3.229250] mmci-pl18x 12400000.sdcc: Initial signal voltage of 3.3v [ 3.249111] mmc0: clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 […trimmed…] [ 4.392652] mmci-pl18x 12400000.sdcc: irq0 (data+cmd) 00000000 [ 4.392785] mmc0: clock 52000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 1 [ 4.406554] mmc0: starting CMD6 arg 03b70201 flags 0000049d […trimmed…] Now, the MMC properly initializes and later switches to high speed. Thanks to: * Ansuel for maintaining/help with the IPQ806x platform, kernel code * slh for additional debugging and suggestions * dwfreed for confirming newer MMC details, clock frequency * robimarko for device driver debug printing help, clock debugging * Drake for testing and confirmation with their own newer NBG6817 ...and anyone else I missed! Signed-off-by: Shane Synan <digitalcircuit36939@gmail.com> Tested-by: Shane Synan <digitalcircuit36939@gmail.com>
Diffstat (limited to 'target/linux/ipq806x/patches-5.10')
-rw-r--r--target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch22
-rw-r--r--target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch10
2 files changed, 8 insertions, 24 deletions
diff --git a/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch b/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch
index 3067ec777a..3b4900fafb 100644
--- a/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch
+++ b/target/linux/ipq806x/patches-5.10/097-1-ipq806x-gcc-add-missing-clk-flag.patch
@@ -69,7 +69,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
},
},
};
-@@ -1293,6 +1295,7 @@ static struct clk_rcg sdc1_src = {
+@@ -1424,6 +1426,7 @@ static struct clk_rcg tsif_ref_src = {
.parent_names = gcc_pxo_pll8,
.num_parents = 2,
.ops = &clk_rcg_ops,
@@ -77,23 +77,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
},
}
};
-@@ -1341,6 +1344,7 @@ static struct clk_rcg sdc3_src = {
- .parent_names = gcc_pxo_pll8,
- .num_parents = 2,
- .ops = &clk_rcg_ops,
-+ .flags = CLK_SET_RATE_GATE,
- },
- }
- };
-@@ -1424,6 +1428,7 @@ static struct clk_rcg tsif_ref_src = {
- .parent_names = gcc_pxo_pll8,
- .num_parents = 2,
- .ops = &clk_rcg_ops,
-+ .flags = CLK_SET_RATE_GATE,
- },
- }
- };
-@@ -2694,7 +2699,8 @@ static struct clk_dyn_rcg ubi32_core1_sr
+@@ -2694,7 +2697,8 @@ static struct clk_dyn_rcg ubi32_core1_sr
.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
.num_parents = 5,
.ops = &clk_dyn_rcg_ops,
@@ -103,7 +87,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
},
},
};
-@@ -2747,7 +2753,8 @@ static struct clk_dyn_rcg ubi32_core2_sr
+@@ -2747,7 +2751,8 @@ static struct clk_dyn_rcg ubi32_core2_sr
.parent_names = gcc_pxo_pll8_pll14_pll18_pll0,
.num_parents = 5,
.ops = &clk_dyn_rcg_ops,
diff --git a/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch b/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch
index f8f4924dd1..d1e047cabf 100644
--- a/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch
+++ b/target/linux/ipq806x/patches-5.10/097-4-ipq806x-gcc-add-missing-clk-and-reset-for-crypto-eng.patch
@@ -107,7 +107,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
{ 64000000, P_PLL8, 3, 1, 2 },
{ 96000000, P_PLL8, 4, 0, 0 },
{ 192000000, P_PLL8, 2, 0, 0 },
-@@ -2647,7 +2703,9 @@ static const struct freq_tbl clk_tbl_nss
+@@ -2645,7 +2701,9 @@ static const struct freq_tbl clk_tbl_nss
{ 110000000, P_PLL18, 1, 1, 5 },
{ 275000000, P_PLL18, 2, 0, 0 },
{ 550000000, P_PLL18, 1, 0, 0 },
@@ -117,7 +117,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
{ }
};
-@@ -2759,6 +2817,186 @@ static struct clk_dyn_rcg ubi32_core2_sr
+@@ -2757,6 +2815,186 @@ static struct clk_dyn_rcg ubi32_core2_sr
},
};
@@ -304,7 +304,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
static struct clk_regmap *gcc_ipq806x_clks[] = {
[PLL0] = &pll0.clkr,
[PLL0_VOTE] = &pll0_vote,
-@@ -2766,6 +3004,7 @@ static struct clk_regmap *gcc_ipq806x_cl
+@@ -2764,6 +3002,7 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL4_VOTE] = &pll4_vote,
[PLL8] = &pll8.clkr,
[PLL8_VOTE] = &pll8_vote,
@@ -312,7 +312,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[PLL14] = &pll14.clkr,
[PLL14_VOTE] = &pll14_vote,
[PLL18] = &pll18.clkr,
-@@ -2880,6 +3119,12 @@ static struct clk_regmap *gcc_ipq806x_cl
+@@ -2878,6 +3117,12 @@ static struct clk_regmap *gcc_ipq806x_cl
[PLL9] = &hfpll0.clkr,
[PLL10] = &hfpll1.clkr,
[PLL12] = &hfpll_l2.clkr,
@@ -325,7 +325,7 @@ Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
};
static const struct qcom_reset_map gcc_ipq806x_resets[] = {
-@@ -3011,6 +3256,11 @@ static const struct qcom_reset_map gcc_i
+@@ -3009,6 +3254,11 @@ static const struct qcom_reset_map gcc_i
[GMAC_CORE3_RESET] = { 0x3cfc, 0 },
[GMAC_CORE4_RESET] = { 0x3d1c, 0 },
[GMAC_AHB_RESET] = { 0x3e24, 0 },