ipq806x: move dts file to the files folder

Signed-off-by: John Crispin <john@phrozen.org>

1 files changed, 0 insertions, 367 deletions

diff --git a/target/linux/ipq806x/patches-4.4/800-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch b/target/linux/ipq806x/patches-4.4/800-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch
deleted file mode 100644
index 1f5eba8377..0000000000
--- a/target/linux/ipq806x/patches-4.4/800-ARM-qcom-add-Netgear-Nighthawk-X4-R7500-device-tree.patch
+++ /dev/null
@@ -1,367 +0,0 @@
-From 7e77aa188a7a7c4391856a9e5ef5ef58f769e679 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 9 Aug 2015 13:02:38 +0200
-Subject: [PATCH] ARM: qcom: add Netgear Nighthawk X4 R7500 device tree
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/arm/boot/dts/Makefile               |   1 +
- arch/arm/boot/dts/qcom-ipq8064-r7500.dts | 370 +++++++++++++++++++++++++++++++
- 2 files changed, 371 insertions(+)
- create mode 100644 arch/arm/boot/dts/qcom-ipq8064-r7500.dts
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -452,6 +452,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
- 	qcom-apq8084-mtp.dtb \
- 	qcom-ipq8064-ap148.dtb \
- 	qcom-ipq8064-db149.dtb \
-+	qcom-ipq8064-r7500.dtb \
- 	qcom-msm8660-surf.dtb \
- 	qcom-msm8960-cdp.dtb \
- 	qcom-msm8974-sony-xperia-honami.dtb
---- /dev/null
-+++ b/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
-@@ -0,0 +1,342 @@
-+#include "qcom-ipq8064-v1.0.dtsi"
-+
-+#include <dt-bindings/input/input.h>
-+
-+/ {
-+	model = "Netgear Nighthawk X4 R7500";
-+	compatible = "netgear,r7500", "qcom,ipq8064";
-+
-+	memory@0 {
-+		reg = <0x42000000 0xe000000>;
-+		device_type = "memory";
-+	};
-+
-+	reserved-memory {
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		ranges;
-+		rsvd@41200000 {
-+			reg = <0x41200000 0x300000>;
-+			no-map;
-+		};
-+	};
-+
-+	aliases {
-+		serial0 = &uart4;
-+		mdio-gpio0 = &mdio0;
-+	};
-+
-+	chosen {
-+		bootargs = "rootfstype=squashfs noinitrd";
-+		linux,stdout-path = "serial0:115200n8";
-+	};
-+
-+	soc {
-+		pinmux@800000 {
-+			i2c4_pins: i2c4_pinmux {
-+				pins = "gpio12", "gpio13";
-+				function = "gsbi4";
-+				bias-disable;
-+			};
-+
-+			nand_pins: nand_pins {
-+				mux {
-+					pins = "gpio34", "gpio35", "gpio36",
-+					       "gpio37", "gpio38", "gpio39",
-+					       "gpio40", "gpio41", "gpio42",
-+					       "gpio43", "gpio44", "gpio45",
-+					       "gpio46", "gpio47";
-+					function = "nand";
-+					drive-strength = <10>;
-+					bias-disable;
-+				};
-+				pullups {
-+					pins = "gpio39";
-+					bias-pull-up;
-+				};
-+				hold {
-+					pins = "gpio40", "gpio41", "gpio42",
-+					       "gpio43", "gpio44", "gpio45",
-+					       "gpio46", "gpio47";
-+					bias-bus-hold;
-+				};
-+			};
-+
-+			mdio0_pins: mdio0_pins {
-+				mux {
-+					pins = "gpio0", "gpio1";
-+					function = "gpio";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
-+
-+			rgmii2_pins: rgmii2_pins {
-+				mux {
-+					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-+					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-+					function = "rgmii2";
-+					drive-strength = <8>;
-+					bias-disable;
-+				};
-+			};
-+		};
-+
-+		gsbi@16300000 {
-+			qcom,mode = <GSBI_PROT_I2C_UART>;
-+			status = "ok";
-+			serial@16340000 {
-+				status = "ok";
-+			};
-+			/*
-+			 * The i2c device on gsbi4 should not be enabled.
-+			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-+			 * RPM usage. Turning this on in kernel manifests as
-+			 * i2c failure for the RPM.
-+			 */
-+		};
-+
-+		sata-phy@1b400000 {
-+			status = "ok";
-+		};
-+
-+		sata@29000000 {
-+			status = "ok";
-+		};
-+
-+		phy@100f8800 {		/* USB3 port 1 HS phy */
-+			status = "ok";
-+		};
-+
-+		phy@100f8830 {		/* USB3 port 1 SS phy */
-+			status = "ok";
-+		};
-+
-+		phy@110f8800 {		/* USB3 port 0 HS phy */
-+			status = "ok";
-+		};
-+
-+		phy@110f8830 {		/* USB3 port 0 SS phy */
-+			status = "ok";
-+		};
-+
-+		usb30@0 {
-+			status = "ok";
-+		};
-+
-+		usb30@1 {
-+			status = "ok";
-+		};
-+
-+		pcie0: pci@1b500000 {
-+			status = "ok";
-+		};
-+
-+		pcie1: pci@1b700000 {
-+			status = "ok";
-+		};
-+
-+		nand@1ac00000 {
-+			status = "ok";
-+
-+			pinctrl-0 = <&nand_pins>;
-+			pinctrl-names = "default";
-+
-+			nand-ecc-strength = <4>;
-+			nand-bus-width = <8>;
-+
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+
-+			qcadata@0 {
-+				label = "qcadata";
-+				reg = <0x0000000 0x0c80000>;
-+				read-only;
-+			};
-+
-+			APPSBL@c80000 {
-+				label = "APPSBL";
-+				reg = <0x0c80000 0x0500000>;
-+				read-only;
-+			};
-+
-+			APPSBLENV@1180000 {
-+				label = "APPSBLENV";
-+				reg = <0x1180000 0x0080000>;
-+				read-only;
-+			};
-+
-+			art: art@1200000 {
-+				label = "art";
-+				reg = <0x1200000 0x0140000>;
-+				read-only;
-+			};
-+
-+			kernel@1340000 {
-+				label = "kernel";
-+				reg = <0x1340000 0x0200000>;
-+			};
-+
-+			ubi@1540000 {
-+				label = "ubi";
-+				reg = <0x1540000 0x1800000>;
-+			};
-+
-+			netgear@2d40000 {
-+				label = "netgear";
-+				reg = <0x2d40000 0x0c00000>;
-+				read-only;
-+			};
-+
-+			reserve@3940000 {
-+				label = "reserve";
-+				reg = <0x3940000 0x46c0000>;
-+				read-only;
-+			};
-+
-+			firmware@1340000 {
-+				label = "firmware";
-+				reg = <0x1340000 0x1a00000>;
-+			};
-+
-+		};
-+
-+		mdio0: mdio {
-+			compatible = "virtual,mdio-gpio";
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
-+			pinctrl-0 = <&mdio0_pins>;
-+			pinctrl-names = "default";
-+
-+			phy0: ethernet-phy@0 {
-+				device_type = "ethernet-phy";
-+				reg = <0>;
-+				qca,ar8327-initvals = <
-+					0x00004 0x7600000   /* PAD0_MODE */
-+					0x00008 0x1000000   /* PAD5_MODE */
-+					0x0000c 0x80        /* PAD6_MODE */
-+					0x000e4 0xaa545     /* MAC_POWER_SEL */
-+					0x000e0 0xc74164de  /* SGMII_CTRL */
-+					0x0007c 0x4e        /* PORT0_STATUS */
-+					0x00094 0x4e        /* PORT6_STATUS */
-+					>;
-+			};
-+
-+			phy4: ethernet-phy@4 {
-+				device_type = "ethernet-phy";
-+				reg = <4>;
-+			};
-+		};
-+
-+		gmac1: ethernet@37200000 {
-+			status = "ok";
-+			phy-mode = "rgmii";
-+			qcom,id = <1>;
-+
-+			pinctrl-0 = <&rgmii2_pins>;
-+			pinctrl-names = "default";
-+
-+			mtd-mac-address = <&art 6>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+
-+		gmac2: ethernet@37400000 {
-+			status = "ok";
-+			phy-mode = "sgmii";
-+			qcom,id = <2>;
-+
-+			mtd-mac-address = <&art 0>;
-+
-+			fixed-link {
-+				speed = <1000>;
-+				full-duplex;
-+			};
-+		};
-+	};
-+
-+	gpio-keys {
-+		compatible = "gpio-keys";
-+
-+		wifi {
-+			label = "wifi";
-+			gpios = <&qcom_pinmux 6 1>;
-+			linux,code = <KEY_WLAN>;
-+		};
-+
-+		reset {
-+			label = "reset";
-+			gpios = <&qcom_pinmux 54 1>;
-+			linux,code = <KEY_RESTART>;
-+		};
-+
-+		wps {
-+			label = "wps";
-+			gpios = <&qcom_pinmux 65 1>;
-+			linux,code = <KEY_WPS_BUTTON>;
-+		};
-+	};
-+
-+	gpio-leds {
-+		compatible = "gpio-leds";
-+
-+		usb1 {
-+			label = "r7500:amber:usb1";
-+			gpios = <&qcom_pinmux 7 0>;
-+		};
-+
-+		usb3 {
-+			label = "r7500:amber:usb3";
-+			gpios = <&qcom_pinmux 8 0>;
-+		};
-+
-+		status {
-+			label = "r7500:amber:status";
-+			gpios = <&qcom_pinmux 9 0>;
-+		};
-+
-+		internet {
-+			label = "r7500:white:internet";
-+			gpios = <&qcom_pinmux 22 0>;
-+		};
-+
-+		wan {
-+			label = "r7500:white:wan";
-+			gpios = <&qcom_pinmux 23 0>;
-+		};
-+
-+		wps {
-+			label = "r7500:white:wps";
-+			gpios = <&qcom_pinmux 24 0>;
-+		};
-+
-+		esata {
-+			label = "r7500:white:esata";
-+			gpios = <&qcom_pinmux 26 0>;
-+		};
-+
-+		power {
-+			label = "r7500:white:power";
-+			gpios = <&qcom_pinmux 53 0>;
-+			default-state = "on";
-+		};
-+
-+		rfkill {
-+			label = "r7500:white:rfkill";
-+			gpios = <&qcom_pinmux 64 0>;
-+		};
-+
-+		wifi5g {
-+			label = "r7500:white:wifi5g";
-+			gpios = <&qcom_pinmux 67 0>;
-+		};
-+	};
-+};
-+
-+&adm_dma {
-+	status = "ok";
-+};