ipq806x: add db149 dts files

DB149 is an IPQ806x based development platform. This patch adds the dts
files to support it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45536

1 files changed, 293 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch
new file mode 100644
index 0000000000..9a036fb451
--- /dev/null
+++ b/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch
@@ -0,0 +1,293 @@
+From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Tue, 7 Apr 2015 19:58:58 -0700
+Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
+
+Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
+SATA, USB2, USB3 and NOR flash.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ arch/arm/boot/dts/Makefile               |   1 +
+ arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++
+ 2 files changed, 258 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 38c89ca..745360a 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+ 	qcom-apq8084-ifc6540.dtb \
+ 	qcom-apq8084-mtp.dtb \
+ 	qcom-ipq8064-ap148.dtb \
++	qcom-ipq8064-db149.dtb \
+ 	qcom-msm8660-surf.dtb \
+ 	qcom-msm8960-cdp.dtb \
+ 	qcom-msm8974-sony-xperia-honami.dtb
+diff --git a/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+new file mode 100644
+index 0000000..224c54f
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+@@ -0,0 +1,257 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++/ {
++	model = "Qualcomm IPQ8064/DB149";
++	compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
++
++	reserved-memory {
++		#address-cells = <1>;
++		#size-cells = <1>;
++		ranges;
++		rsvd@41200000 {
++			reg = <0x41200000 0x300000>;
++			no-map;
++		};
++	};
++
++	alias {
++		serial0 = &uart2;
++	};
++
++	chosen {
++		linux,stdout-path = "serial0:115200n8";
++	};
++
++	aliases {
++		mdio-gpio0 = &mdio0;
++	};
++
++	soc {
++		pinmux@800000 {
++			pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
++			pinctrl-names = "default";
++
++			i2c4_pins: i2c4_pinmux {
++				pins = "gpio12", "gpio13";
++				function = "gsbi4";
++				bias-disable;
++			};
++
++			spi_pins: spi_pins {
++				mux {
++					pins = "gpio18", "gpio19", "gpio21";
++					function = "gsbi5";
++					drive-strength = <10>;
++					bias-none;
++				};
++			};
++
++			mdio0_pins: mdio0_pins {
++				mux {
++					pins = "gpio0", "gpio1";
++					function = "gpio";
++					drive-strength = <8>;
++					bias-disable;
++				};
++			};
++
++			rgmii0_pinmux: rgmii0_pinmux {
++				mux {
++					pins = "gpio2", "gpio66";
++					drive-strength = <8>;
++					bias-disable;
++				};
++			};
++		};
++
++		gsbi2: gsbi@12480000 {
++			qcom,mode = <GSBI_PROT_I2C_UART>;
++			status = "ok";
++			uart2: serial@12490000 {
++				status = "ok";
++			};
++		};
++
++		gsbi5: gsbi@1a200000 {
++			qcom,mode = <GSBI_PROT_SPI>;
++			status = "ok";
++
++			spi4: spi@1a280000 {
++				status = "ok";
++				spi-max-frequency = <50000000>;
++
++				pinctrl-0 = <&spi_pins>;
++				pinctrl-names = "default";
++
++				cs-gpios = <&qcom_pinmux 20 0>;
++
++				flash: m25p80@0 {
++					compatible = "s25fl256s1";
++					#address-cells = <1>;
++					#size-cells = <1>;
++					spi-max-frequency = <50000000>;
++					reg = <0>;
++					m25p,fast-read;
++
++					partition@0 {
++						label = "lowlevel_init";
++						reg = <0x0 0x1b0000>;
++					};
++
++					partition@1 {
++						label = "u-boot";
++						reg = <0x1b0000 0x80000>;
++					};
++
++					partition@2 {
++						label = "u-boot-env";
++						reg = <0x230000 0x40000>;
++					};
++
++					partition@3 {
++						label = "caldata";
++						reg = <0x270000 0x40000>;
++					};
++
++					partition@4 {
++						label = "firmware";
++						reg = <0x2b0000 0x1d50000>;
++					};
++				};
++			};
++		};
++
++		sata-phy@1b400000 {
++			status = "ok";
++		};
++
++		sata@29000000 {
++			status = "ok";
++		};
++
++		phy@100f8800 {		/* USB3 port 1 HS phy */
++			status = "ok";
++		};
++
++		phy@100f8830 {		/* USB3 port 1 SS phy */
++			status = "ok";
++		};
++
++		phy@110f8800 {		/* USB3 port 0 HS phy */
++			status = "ok";
++		};
++
++		phy@110f8830 {		/* USB3 port 0 SS phy */
++			status = "ok";
++		};
++
++		usb30@0 {
++			status = "ok";
++		};
++
++		usb30@1 {
++			status = "ok";
++		};
++
++		mdio0: mdio {
++			compatible = "virtual,mdio-gpio";
++			#address-cells = <1>;
++			#size-cells = <0>;
++			gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++
++			phy0: ethernet-phy@0 {
++				device_type = "ethernet-phy";
++				reg = <0>;
++				qca,ar8327-initvals = <
++					0x00004 0x7600000   /* PAD0_MODE */
++					0x00008 0x1000000   /* PAD5_MODE */
++					0x0000c 0x80        /* PAD6_MODE */
++					0x000e4 0xaa545     /* MAC_POWER_SEL */
++					0x000e0 0xc74164de  /* SGMII_CTRL */
++					0x0007c 0x4e        /* PORT0_STATUS */
++					0x00094 0x4e        /* PORT6_STATUS */
++				>;
++			};
++
++			phy4: ethernet-phy@4 {
++				device_type = "ethernet-phy";
++				reg = <4>;
++			};
++
++			phy6: ethernet-phy@6 {
++				device_type = "ethernet-phy";
++				reg = <6>;
++			};
++
++			phy7: ethernet-phy@7 {
++				device_type = "ethernet-phy";
++				reg = <7>;
++			};
++		};
++
++		nss-gmac-common {
++			reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
++			reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
++		};
++
++		gmac0: ethernet@37000000 {
++			status = "ok";
++			phy-mode = "rgmii";
++			qcom,id = <0>;
++			qcom,phy_mdio_addr = <4>;
++			qcom,poll_required = <1>;
++			qcom,rgmii_delay = <1>;
++			qcom,emulation = <0>;
++			qcom,forced_speed = <1000>;
++			qcom,forced_duplex = <1>;
++			qcom,socver = <0>;
++			local-mac-address = [000000000000];
++			mdiobus = <&mdio0>;
++		};
++
++		gmac1: ethernet@37200000 {
++			status = "ok";
++			phy-mode = "sgmii";
++			qcom,id = <1>;
++			qcom,phy_mdio_addr = <0>;
++			qcom,poll_required = <0>;
++			qcom,rgmii_delay = <0>;
++			qcom,emulation = <0>;
++			qcom,forced_speed = <1000>;
++			qcom,forced_duplex = <1>;
++			qcom,socver = <0>;
++			local-mac-address = [000000000000];
++			mdiobus = <&mdio0>;
++		};
++
++		gmac2: ethernet@37400000 {
++			status = "ok";
++			phy-mode = "sgmii";
++			qcom,id = <2>;
++			qcom,phy_mdio_addr = <6>;
++			qcom,poll_required = <1>;
++			qcom,rgmii_delay = <0>;
++			qcom,emulation = <0>;
++			qcom,forced_speed = <0>;
++			qcom,forced_duplex = <0>;
++			qcom,socver = <0>;
++			local-mac-address = [000000000000];
++			mdiobus = <&mdio0>;
++		};
++
++		gmac3: ethernet@37600000 {
++			status = "ok";
++			phy-mode = "sgmii";
++			qcom,id = <3>;
++			qcom,phy_mdio_addr = <7>;
++			qcom,poll_required = <1>;
++			qcom,rgmii_delay = <0>;
++			qcom,emulation = <0>;
++			qcom,forced_speed = <0>;
++			qcom,forced_duplex = <0>;
++			qcom,socver = <0>;
++			local-mac-address = [000000000000];
++			mdiobus = <&mdio0>;
++		};
++	};
++};
+-- 
+1.9.1
+