kernel: update 4.0 to 4.0.5

Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.5

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46063

4 files changed, 18 insertions, 18 deletions

diff --git a/target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch b/target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch
index 854131c7f6..4fb62dd529 100644
--- a/target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch
+++ b/target/linux/ipq806x/patches-4.0/126-add-rpm-to-ipq8064-dts.patch
@@ -7,8 +7,8 @@
 +#include <dt-bindings/mfd/qcom-rpm.h>
  #include <dt-bindings/soc/qcom,gsbi.h>
  #include <dt-bindings/reset/qcom,gcc-ipq806x.h>
- 
-@@ -75,6 +76,63 @@
+ #include <include/dt-bindings/interrupt-controller/arm-gic.h>
+@@ -76,6 +77,63 @@
  		ranges;
  		compatible = "simple-bus";
  
@@ -72,7 +72,7 @@
  		qcom_pinmux: pinmux@800000 {
  			compatible = "qcom,ipq8064-pinctrl";
  			reg = <0x800000 0x4000>;
-@@ -119,6 +177,12 @@
+@@ -120,6 +178,12 @@
  			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
  		};
  
diff --git a/target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch b/target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch
index f699521dd1..52af41371c 100644
--- a/target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch
+++ b/target/linux/ipq806x/patches-4.0/135-clk-Avoid-sending-high-rates-to-downstream-clocks-during-set_rate.patch
@@ -47,7 +47,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
 
 --- a/drivers/clk/clk.c
 +++ b/drivers/clk/clk.c
-@@ -1688,21 +1688,24 @@ static struct clk_core *clk_propagate_ra
+@@ -1696,21 +1696,24 @@ static struct clk_core *clk_propagate_ra
   * walk down a subtree and set the new rates notifying the rate
   * change on the way
   */
@@ -79,7 +79,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
  
  	if (clk->new_parent && clk->new_parent != clk->parent) {
  		old_parent = __clk_set_parent_before(clk, clk->new_parent);
-@@ -1722,7 +1725,7 @@ static void clk_change_rate(struct clk_c
+@@ -1730,7 +1733,7 @@ static void clk_change_rate(struct clk_c
  	if (!skip_set_rate && clk->ops->set_rate)
  		clk->ops->set_rate(clk->hw, clk->new_rate, best_parent_rate);
  
@@ -88,7 +88,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
  
  	if (clk->notifier_count && old_rate != clk->rate)
  		__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
-@@ -1735,12 +1738,13 @@ static void clk_change_rate(struct clk_c
+@@ -1743,12 +1746,13 @@ static void clk_change_rate(struct clk_c
  		/* Skip children who will be reparented to another clock */
  		if (child->new_parent && child->new_parent != clk)
  			continue;
@@ -105,7 +105,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
  }
  
  static int clk_core_set_rate_nolock(struct clk_core *clk,
-@@ -1749,6 +1753,7 @@ static int clk_core_set_rate_nolock(stru
+@@ -1757,6 +1761,7 @@ static int clk_core_set_rate_nolock(stru
  	struct clk_core *top, *fail_clk;
  	unsigned long rate = req_rate;
  	int ret = 0;
@@ -113,7 +113,7 @@ drivers/clk/clk.c | 34 ++++++++++++++++++++++------------
  
  	if (!clk)
  		return 0;
-@@ -1774,8 +1779,13 @@ static int clk_core_set_rate_nolock(stru
+@@ -1782,8 +1787,13 @@ static int clk_core_set_rate_nolock(stru
  		return -EBUSY;
  	}
  
diff --git a/target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch
index d3363f84a8..a5d9c41818 100644
--- a/target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch
+++ b/target/linux/ipq806x/patches-4.0/136-clk-Add-safe-switch-hook.patch
@@ -47,7 +47,7 @@ handles that problem on Krait, but on other platforms it won't work.
  	struct clk_core		*new_parent;
  	struct clk_core		*new_child;
  	unsigned long		flags;
-@@ -1549,7 +1552,8 @@ out:
+@@ -1557,7 +1560,8 @@ out:
  static void clk_calc_subtree(struct clk_core *clk, unsigned long new_rate,
  			     struct clk_core *new_parent, u8 p_index)
  {
@@ -57,7 +57,7 @@ handles that problem on Krait, but on other platforms it won't work.
  
  	clk->new_rate = new_rate;
  	clk->new_parent = new_parent;
-@@ -1559,6 +1563,18 @@ static void clk_calc_subtree(struct clk_
+@@ -1567,6 +1571,18 @@ static void clk_calc_subtree(struct clk_
  	if (new_parent && new_parent != clk->parent)
  		new_parent->new_child = clk;
  
@@ -76,7 +76,7 @@ handles that problem on Krait, but on other platforms it won't work.
  	hlist_for_each_entry(child, &clk->children, child_node) {
  		child->new_rate = clk_recalc(child, new_rate);
  		clk_calc_subtree(child, child->new_rate, NULL, 0);
-@@ -1654,14 +1670,43 @@ static struct clk_core *clk_propagate_ra
+@@ -1662,14 +1678,43 @@ static struct clk_core *clk_propagate_ra
  						  unsigned long event)
  {
  	struct clk_core *child, *tmp_clk, *fail_clk = NULL;
@@ -123,7 +123,7 @@ handles that problem on Krait, but on other platforms it won't work.
  			fail_clk = clk;
  	}
  
-@@ -1707,7 +1752,8 @@ clk_change_rate(struct clk_core *clk, un
+@@ -1715,7 +1760,8 @@ clk_change_rate(struct clk_core *clk, un
  
  	old_rate = clk->rate;
  
@@ -133,7 +133,7 @@ handles that problem on Krait, but on other platforms it won't work.
  		old_parent = __clk_set_parent_before(clk, clk->new_parent);
  
  		if (clk->ops->set_rate_and_parent) {
-@@ -1727,9 +1773,6 @@ clk_change_rate(struct clk_core *clk, un
+@@ -1735,9 +1781,6 @@ clk_change_rate(struct clk_core *clk, un
  
  	clk->rate = clk->new_rate;
  
@@ -143,7 +143,7 @@ handles that problem on Krait, but on other platforms it won't work.
  	/*
  	 * Use safe iteration, as change_rate can actually swap parents
  	 * for certain clock types.
-@@ -1789,6 +1832,8 @@ static int clk_core_set_rate_nolock(stru
+@@ -1797,6 +1840,8 @@ static int clk_core_set_rate_nolock(stru
  
  	clk->req_rate = req_rate;
  
diff --git a/target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch b/target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
index 9f8d8cb7e8..a3c3bbfc9e 100644
--- a/target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
+++ b/target/linux/ipq806x/patches-4.0/144-ARM-dts-qcom-Add-necessary-DT-data-for-Krait-cpufreq.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
-@@ -23,6 +23,11 @@
+@@ -24,6 +24,11 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc0>;
  			qcom,saw = <&saw0>;
@@ -12,7 +12,7 @@
  		};
  
  		cpu@1 {
-@@ -33,11 +38,24 @@
+@@ -34,11 +39,24 @@
  			next-level-cache = <&L2>;
  			qcom,acc = <&acc1>;
  			qcom,saw = <&saw1>;
@@ -37,7 +37,7 @@
  		};
  	};
  
-@@ -70,6 +88,46 @@
+@@ -71,6 +89,46 @@
  		};
  	};
  
@@ -84,7 +84,7 @@
  	soc: soc {
  		#address-cells = <1>;
  		#size-cells = <1>;
-@@ -170,11 +228,13 @@
+@@ -171,11 +229,13 @@
  		acc0: clock-controller@2088000 {
  			compatible = "qcom,kpss-acc-v1";
  			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;