ipq806x: replace caf nss-gmac driver by upstream stmmac

This driver has been cherry-picked and backported from the following
LKML thread:
*https://lkml.org/lkml/2015/5/26/744

It also updates the DT accordingly.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45831

1 files changed, 427 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-3.18/704-stmmac-add-ipq806x-glue-layer.patch b/target/linux/ipq806x/patches-3.18/704-stmmac-add-ipq806x-glue-layer.patch
new file mode 100644
index 0000000000..fa6740476b
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/704-stmmac-add-ipq806x-glue-layer.patch
@@ -0,0 +1,427 @@
+From 69fb970ad3fe05af7cb99ea78230c69c7ca0d03b Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Fri, 8 May 2015 16:10:22 -0700
+Subject: [PATCH 4/8] stmmac: add ipq806x glue layer
+
+The ethernet controller available in IPQ806x is a Synopsys DesignWare
+Gigabit MAC IP core, already supported by the stmmac driver.
+
+This glue layer implements some platform specific settings required to
+get the controller working on an IPQ806x based platform.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ drivers/net/ethernet/stmicro/stmmac/Kconfig        |   1 +
+ drivers/net/ethernet/stmicro/stmmac/Makefile       |   2 +-
+ drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c    | 324 +++++++++++++++++++++
+ .../net/ethernet/stmicro/stmmac/stmmac_platform.c  |   1 +
+ .../net/ethernet/stmicro/stmmac/stmmac_platform.h  |   1 +
+ 5 files changed, 328 insertions(+), 1 deletion(-)
+ create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-ipq.c
+
+--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
++++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
+@@ -16,6 +16,7 @@ if STMMAC_ETH
+ config STMMAC_PLATFORM
+ 	bool "STMMAC Platform bus support"
+ 	depends on STMMAC_ETH
++	select MFD_SYSCON
+ 	default y
+ 	---help---
+ 	  This selects the platform specific bus support for
+@@ -26,6 +27,15 @@ config STMMAC_PLATFORM
+ 
+ 	  If unsure, say N.
+ 
++config DWMAC_IPQ806X
++	bool "QCA IPQ806x dwmac support"
++	depends on STMMAC_PLATFORM && ARCH_QCOM
++	help
++	  Support for Ethernet controller on QCA IPQ806x SoC.
++
++	  This selects the QCA IPQ806x SoC glue layer support for
++	  the stmmac device driver.
++
+ config DWMAC_MESON
+ 	bool "Amlogic Meson dwmac support"
+ 	depends on STMMAC_PLATFORM && ARCH_MESON
+--- a/drivers/net/ethernet/stmicro/stmmac/Makefile
++++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
+@@ -1,6 +1,7 @@
+ obj-$(CONFIG_STMMAC_ETH) += stmmac.o
+ stmmac-$(CONFIG_STMMAC_PLATFORM) += stmmac_platform.o
+ stmmac-$(CONFIG_STMMAC_PCI) += stmmac_pci.o
++stmmac-$(CONFIG_DWMAC_IPQ806X) += dwmac-ipq806x.o
+ stmmac-$(CONFIG_DWMAC_MESON) += dwmac-meson.o
+ stmmac-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o
+ stmmac-$(CONFIG_DWMAC_STI) += dwmac-sti.o
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+@@ -46,6 +46,9 @@ static const struct of_device_id stmmac_
+ #ifdef CONFIG_DWMAC_SOCFPGA
+ 	{ .compatible = "altr,socfpga-stmmac", .data = &socfpga_gmac_data },
+ #endif
++#ifdef CONFIG_DWMAC_IPQ806X
++	{ .compatible = "qcom,ipq806x-gmac", .data = &ipq806x_gmac_data },
++#endif
+ 	/* SoC specific glue layers should come before generic bindings */
+ 	{ .compatible = "st,spear600-gmac"},
+ 	{ .compatible = "snps,dwmac-3.610"},
+--- /dev/null
++++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-ipq806x.c
+@@ -0,0 +1,343 @@
++/*
++ * Qualcomm Atheros IPQ806x GMAC glue layer
++ *
++ * Copyright (C) 2015 The Linux Foundation
++ *
++ * Permission to use, copy, modify, and/or distribute this software for any
++ * purpose with or without fee is hereby granted, provided that the above
++ * copyright notice and this permission notice appear in all copies.
++ *
++ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
++ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
++ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
++ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
++ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
++ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
++ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
++ */
++
++#include <linux/device.h>
++#include <linux/platform_device.h>
++#include <linux/phy.h>
++#include <linux/regmap.h>
++#include <linux/clk.h>
++#include <linux/reset.h>
++#include <linux/of_net.h>
++#include <linux/mfd/syscon.h>
++#include <linux/stmmac.h>
++#include <linux/of_mdio.h>
++
++#include "stmmac.h"
++
++#define NSS_COMMON_CLK_GATE			0x8
++#define NSS_COMMON_CLK_GATE_PTP_EN(x)		BIT(0x10 + x)
++#define NSS_COMMON_CLK_GATE_RGMII_RX_EN(x)	BIT(0x9 + (x * 2))
++#define NSS_COMMON_CLK_GATE_RGMII_TX_EN(x)	BIT(0x8 + (x * 2))
++#define NSS_COMMON_CLK_GATE_GMII_RX_EN(x)	BIT(0x4 + x)
++#define NSS_COMMON_CLK_GATE_GMII_TX_EN(x)	BIT(0x0 + x)
++
++#define NSS_COMMON_CLK_DIV0			0xC
++#define NSS_COMMON_CLK_DIV_OFFSET(x)		(x * 8)
++#define NSS_COMMON_CLK_DIV_MASK			0x7f
++
++#define NSS_COMMON_CLK_SRC_CTRL			0x14
++#define NSS_COMMON_CLK_SRC_CTRL_OFFSET(x)	(1 << x)
++/* Mode is coded on 1 bit but is different depending on the MAC ID:
++ * MAC0: QSGMII=0 RGMII=1
++ * MAC1: QSGMII=0 SGMII=0 RGMII=1
++ * MAC2 & MAC3: QSGMII=0 SGMII=1
++ */
++#define NSS_COMMON_CLK_SRC_CTRL_RGMII(x)	1
++#define NSS_COMMON_CLK_SRC_CTRL_SGMII(x)	((x >= 2) ? 1 : 0)
++
++#define NSS_COMMON_MACSEC_CTL			0x28
++#define NSS_COMMON_MACSEC_CTL_EXT_BYPASS_EN(x)	(1 << x)
++
++#define NSS_COMMON_GMAC_CTL(x)			(0x30 + (x * 4))
++#define NSS_COMMON_GMAC_CTL_CSYS_REQ		BIT(19)
++#define NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL	BIT(16)
++#define NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET	8
++#define NSS_COMMON_GMAC_CTL_IFG_OFFSET		0
++#define NSS_COMMON_GMAC_CTL_IFG_MASK		0x3f
++
++#define NSS_COMMON_CLK_DIV_RGMII_1000		1
++#define NSS_COMMON_CLK_DIV_RGMII_100		9
++#define NSS_COMMON_CLK_DIV_RGMII_10		99
++#define NSS_COMMON_CLK_DIV_SGMII_1000		0
++#define NSS_COMMON_CLK_DIV_SGMII_100		4
++#define NSS_COMMON_CLK_DIV_SGMII_10		49
++
++#define QSGMII_PCS_MODE_CTL			0x68
++#define QSGMII_PCS_MODE_CTL_AUTONEG_EN(x)	BIT((x * 8) + 7)
++
++#define QSGMII_PCS_CAL_LCKDT_CTL		0x120
++#define QSGMII_PCS_CAL_LCKDT_CTL_RST		BIT(19)
++
++/* Only GMAC1/2/3 support SGMII and their CTL register are not contiguous */
++#define QSGMII_PHY_SGMII_CTL(x)			((x == 1) ? 0x134 : \
++						 (0x13c + (4 * (x - 2))))
++#define QSGMII_PHY_CDR_EN			BIT(0)
++#define QSGMII_PHY_RX_FRONT_EN			BIT(1)
++#define QSGMII_PHY_RX_SIGNAL_DETECT_EN		BIT(2)
++#define QSGMII_PHY_TX_DRIVER_EN			BIT(3)
++#define QSGMII_PHY_QSGMII_EN			BIT(7)
++#define QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET	12
++#define QSGMII_PHY_PHASE_LOOP_GAIN_MASK		0x7
++#define QSGMII_PHY_RX_DC_BIAS_OFFSET		18
++#define QSGMII_PHY_RX_DC_BIAS_MASK		0x3
++#define QSGMII_PHY_RX_INPUT_EQU_OFFSET		20
++#define QSGMII_PHY_RX_INPUT_EQU_MASK		0x3
++#define QSGMII_PHY_CDR_PI_SLEW_OFFSET		22
++#define QSGMII_PHY_CDR_PI_SLEW_MASK		0x3
++#define QSGMII_PHY_TX_DRV_AMP_OFFSET		28
++#define QSGMII_PHY_TX_DRV_AMP_MASK		0xf
++
++struct ipq806x_gmac {
++	struct platform_device *pdev;
++	struct regmap *nss_common;
++	struct regmap *qsgmii_csr;
++	uint32_t id;
++	struct clk *core_clk;
++	phy_interface_t phy_mode;
++};
++
++static int get_clk_div_sgmii(struct ipq806x_gmac *gmac, unsigned int speed)
++{
++	struct device *dev = &gmac->pdev->dev;
++	int div;
++
++	switch (speed) {
++	case SPEED_1000:
++		div = NSS_COMMON_CLK_DIV_SGMII_1000;
++		break;
++
++	case SPEED_100:
++		div = NSS_COMMON_CLK_DIV_SGMII_100;
++		break;
++
++	case SPEED_10:
++		div = NSS_COMMON_CLK_DIV_SGMII_10;
++		break;
++
++	default:
++		dev_err(dev, "Speed %dMbps not supported in SGMII\n", speed);
++		return -EINVAL;
++	}
++
++	return div;
++}
++
++static int get_clk_div_rgmii(struct ipq806x_gmac *gmac, unsigned int speed)
++{
++	struct device *dev = &gmac->pdev->dev;
++	int div;
++
++	switch (speed) {
++	case SPEED_1000:
++		div = NSS_COMMON_CLK_DIV_RGMII_1000;
++		break;
++
++	case SPEED_100:
++		div = NSS_COMMON_CLK_DIV_RGMII_100;
++		break;
++
++	case SPEED_10:
++		div = NSS_COMMON_CLK_DIV_RGMII_10;
++		break;
++
++	default:
++		dev_err(dev, "Speed %dMbps not supported in RGMII\n", speed);
++		return -EINVAL;
++	}
++
++	return div;
++}
++
++static int ipq806x_gmac_set_speed(struct ipq806x_gmac *gmac, unsigned int speed)
++{
++	uint32_t clk_bits, val;
++	int div;
++
++	switch (gmac->phy_mode) {
++	case PHY_INTERFACE_MODE_RGMII:
++		div = get_clk_div_rgmii(gmac, speed);
++		clk_bits = NSS_COMMON_CLK_GATE_RGMII_RX_EN(gmac->id) |
++			   NSS_COMMON_CLK_GATE_RGMII_TX_EN(gmac->id);
++		break;
++
++	case PHY_INTERFACE_MODE_SGMII:
++		div = get_clk_div_sgmii(gmac, speed);
++		clk_bits = NSS_COMMON_CLK_GATE_GMII_RX_EN(gmac->id) |
++			   NSS_COMMON_CLK_GATE_GMII_TX_EN(gmac->id);
++		break;
++
++	default:
++		dev_err(&gmac->pdev->dev, "Unsupported PHY mode: \"%s\"\n",
++			phy_modes(gmac->phy_mode));
++		return -EINVAL;
++	}
++
++	/* Disable the clocks */
++	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
++	val &= ~clk_bits;
++	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
++
++	/* Set the divider */
++	regmap_read(gmac->nss_common, NSS_COMMON_CLK_DIV0, &val);
++	val &= ~(NSS_COMMON_CLK_DIV_MASK
++		 << NSS_COMMON_CLK_DIV_OFFSET(gmac->id));
++	val |= div << NSS_COMMON_CLK_DIV_OFFSET(gmac->id);
++	regmap_write(gmac->nss_common, NSS_COMMON_CLK_DIV0, val);
++
++	/* Enable the clock back */
++	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
++	val |= clk_bits;
++	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
++
++	return 0;
++}
++
++static void *ipq806x_gmac_of_parse(struct ipq806x_gmac *gmac)
++{
++	struct device *dev = &gmac->pdev->dev;
++
++	gmac->phy_mode = of_get_phy_mode(dev->of_node);
++	if (gmac->phy_mode < 0) {
++		dev_err(dev, "missing phy mode property\n");
++		return ERR_PTR(-EINVAL);
++	}
++
++	if (of_property_read_u32(dev->of_node, "qcom,id", &gmac->id) < 0) {
++		dev_err(dev, "missing qcom id property\n");
++		return ERR_PTR(-EINVAL);
++	}
++
++	/* The GMACs are called 1 to 4 in the documentation, but to simplify the
++	 * code and keep it consistent with the Linux convention, we'll number
++	 * them from 0 to 3 here.
++	 */
++	if (gmac->id < 0 || gmac->id > 3) {
++		dev_err(dev, "invalid gmac id\n");
++		return ERR_PTR(-EINVAL);
++	}
++
++	gmac->core_clk = devm_clk_get(dev, "stmmaceth");
++	if (IS_ERR(gmac->core_clk)) {
++		dev_err(dev, "missing stmmaceth clk property\n");
++		return gmac->core_clk;
++	}
++	clk_set_rate(gmac->core_clk, 266000000);
++
++	/* Setup the register map for the nss common registers */
++	gmac->nss_common = syscon_regmap_lookup_by_phandle(dev->of_node,
++							   "qcom,nss-common");
++	if (IS_ERR(gmac->nss_common)) {
++		dev_err(dev, "missing nss-common node\n");
++		return gmac->nss_common;
++	}
++
++	/* Setup the register map for the qsgmii csr registers */
++	gmac->qsgmii_csr = syscon_regmap_lookup_by_phandle(dev->of_node,
++							   "qcom,qsgmii-csr");
++	if (IS_ERR(gmac->qsgmii_csr)) {
++		dev_err(dev, "missing qsgmii-csr node\n");
++		return gmac->qsgmii_csr;
++	}
++
++	return NULL;
++}
++
++static void *ipq806x_gmac_setup(struct platform_device *pdev)
++{
++	struct device *dev = &pdev->dev;
++	struct ipq806x_gmac *gmac;
++	int val;
++	void *err;
++
++	gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL);
++	if (!gmac)
++		return ERR_PTR(-ENOMEM);
++
++	gmac->pdev = pdev;
++
++	err = ipq806x_gmac_of_parse(gmac);
++	if (err) {
++		dev_err(dev, "device tree parsing error\n");
++		return err;
++	}
++
++	regmap_write(gmac->qsgmii_csr, QSGMII_PCS_CAL_LCKDT_CTL,
++		     QSGMII_PCS_CAL_LCKDT_CTL_RST);
++
++	/* Inter frame gap is set to 12 */
++	val = 12 << NSS_COMMON_GMAC_CTL_IFG_OFFSET |
++	      12 << NSS_COMMON_GMAC_CTL_IFG_LIMIT_OFFSET;
++	/* We also initiate an AXI low power exit request */
++	val |= NSS_COMMON_GMAC_CTL_CSYS_REQ;
++	switch (gmac->phy_mode) {
++	case PHY_INTERFACE_MODE_RGMII:
++		val |= NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
++		break;
++	case PHY_INTERFACE_MODE_SGMII:
++		val &= ~NSS_COMMON_GMAC_CTL_PHY_IFACE_SEL;
++		break;
++	default:
++		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
++			phy_modes(gmac->phy_mode));
++		return NULL;
++	}
++	regmap_write(gmac->nss_common, NSS_COMMON_GMAC_CTL(gmac->id), val);
++
++	/* Configure the clock src according to the mode */
++	regmap_read(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, &val);
++	val &= ~NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
++	switch (gmac->phy_mode) {
++	case PHY_INTERFACE_MODE_RGMII:
++		val |= NSS_COMMON_CLK_SRC_CTRL_RGMII(gmac->id) <<
++			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
++		break;
++	case PHY_INTERFACE_MODE_SGMII:
++		val |= NSS_COMMON_CLK_SRC_CTRL_SGMII(gmac->id) <<
++			NSS_COMMON_CLK_SRC_CTRL_OFFSET(gmac->id);
++		break;
++	default:
++		dev_err(&pdev->dev, "Unsupported PHY mode: \"%s\"\n",
++			phy_modes(gmac->phy_mode));
++		return NULL;
++	}
++	regmap_write(gmac->nss_common, NSS_COMMON_CLK_SRC_CTRL, val);
++
++	/* Enable PTP clock */
++	regmap_read(gmac->nss_common, NSS_COMMON_CLK_GATE, &val);
++	val |= NSS_COMMON_CLK_GATE_PTP_EN(gmac->id);
++	regmap_write(gmac->nss_common, NSS_COMMON_CLK_GATE, val);
++
++	if (gmac->phy_mode == PHY_INTERFACE_MODE_SGMII) {
++		regmap_write(gmac->qsgmii_csr, QSGMII_PHY_SGMII_CTL(gmac->id),
++			     QSGMII_PHY_CDR_EN |
++			     QSGMII_PHY_RX_FRONT_EN |
++			     QSGMII_PHY_RX_SIGNAL_DETECT_EN |
++			     QSGMII_PHY_TX_DRIVER_EN |
++			     QSGMII_PHY_QSGMII_EN |
++			     0x4 << QSGMII_PHY_PHASE_LOOP_GAIN_OFFSET |
++			     0x3 << QSGMII_PHY_RX_DC_BIAS_OFFSET |
++			     0x1 << QSGMII_PHY_RX_INPUT_EQU_OFFSET |
++			     0x2 << QSGMII_PHY_CDR_PI_SLEW_OFFSET |
++			     0xC << QSGMII_PHY_TX_DRV_AMP_OFFSET);
++	}
++
++	return gmac;
++}
++
++static void ipq806x_gmac_fix_mac_speed(void *priv, unsigned int speed)
++{
++	struct ipq806x_gmac *gmac = priv;
++
++	ipq806x_gmac_set_speed(gmac, speed);
++}
++
++const struct stmmac_of_data ipq806x_gmac_data = {
++	.has_gmac	= 1,
++	.setup		= ipq806x_gmac_setup,
++	.fix_mac_speed	= ipq806x_gmac_fix_mac_speed,
++};
+--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
++++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+@@ -137,6 +137,9 @@ void stmmac_disable_eee_mode(struct stmm
+ bool stmmac_eee_init(struct stmmac_priv *priv);
+ 
+ #ifdef CONFIG_STMMAC_PLATFORM
++#ifdef CONFIG_DWMAC_IPQ806X
++extern const struct stmmac_of_data ipq806x_gmac_data;
++#endif
+ #ifdef CONFIG_DWMAC_MESON
+ extern const struct stmmac_of_data meson6_dwmac_data;
+ #endif