ipq806x: Add support for linux-4.4

1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>

1 files changed, 0 insertions, 304 deletions

diff --git a/target/linux/ipq806x/patches-3.18/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch b/target/linux/ipq806x/patches-3.18/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
deleted file mode 100644
index c3ca9b5f70..0000000000
--- a/target/linux/ipq806x/patches-3.18/143-cpufreq-Add-module-to-register-cpufreq-on-Krait-CPUs.patch
+++ /dev/null
@@ -1,304 +0,0 @@
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [v3,12/13] cpufreq: Add module to register cpufreq on Krait CPUs
-From: Stephen Boyd <sboyd@codeaurora.org>
-X-Patchwork-Id: 6063191
-Message-Id: <1426920332-9340-13-git-send-email-sboyd@codeaurora.org>
-To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
-Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
-	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
-	Viresh Kumar <viresh.kumar@linaro.org>, <devicetree@vger.kernel.org>
-Date: Fri, 20 Mar 2015 23:45:31 -0700
-
-Register a cpufreq-generic device whenever we detect that a
-"qcom,krait" compatible CPU is present in DT.
-
-Cc: <devicetree@vger.kernel.org>
-Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
-
----
-.../devicetree/bindings/arm/msm/qcom,pvs.txt       |  38 ++++
- drivers/cpufreq/Kconfig.arm                        |   9 +
- drivers/cpufreq/Makefile                           |   1 +
- drivers/cpufreq/qcom-cpufreq.c                     | 204 +++++++++++++++++++++
- 4 files changed, 252 insertions(+)
- create mode 100644 Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
- create mode 100644 drivers/cpufreq/qcom-cpufreq.c
-
---- /dev/null
-+++ b/Documentation/devicetree/bindings/arm/msm/qcom,pvs.txt
-@@ -0,0 +1,38 @@
-+Qualcomm Process Voltage Scaling Tables
-+
-+The node name is required to be "qcom,pvs". There shall only be one
-+such node present in the root of the tree.
-+
-+PROPERTIES
-+
-+- qcom,pvs-format-a or qcom,pvs-format-b:
-+	Usage: required
-+	Value type: <empty>
-+	Definition: Indicates the format of qcom,speedX-pvsY-bin-vZ properties.
-+		    If qcom,pvs-format-a is used the table is two columns
-+		    (frequency and voltage in that order). If qcom,pvs-format-b 		    is used the table is three columns (frequency, voltage,
-+		    and current in that order).
-+
-+- qcom,speedX-pvsY-bin-vZ:
-+	Usage: required
-+	Value type: <prop-encoded-array>
-+	Definition: The PVS table corresponding to the speed bin X, pvs bin Y,
-+		    and version Z.
-+Example:
-+
-+	qcom,pvs {
-+		qcom,pvs-format-a;
-+		qcom,speed0-pvs0-bin-v0 =
-+			<  384000000  950000 >,
-+			<  486000000  975000 >,
-+			<  594000000 1000000 >,
-+			<  702000000 1025000 >,
-+			<  810000000 1075000 >,
-+			<  918000000 1100000 >,
-+			< 1026000000 1125000 >,
-+			< 1134000000 1175000 >,
-+			< 1242000000 1200000 >,
-+			< 1350000000 1225000 >,
-+			< 1458000000 1237500 >,
-+			< 1512000000 1250000 >;
-+	};
---- a/drivers/cpufreq/Kconfig.arm
-+++ b/drivers/cpufreq/Kconfig.arm
-@@ -129,6 +129,15 @@ config ARM_OMAP2PLUS_CPUFREQ
- 	depends on ARCH_OMAP2PLUS
- 	default ARCH_OMAP2PLUS
- 
-+config ARM_QCOM_CPUFREQ
-+	tristate "Qualcomm based"
-+	depends on ARCH_QCOM
-+	select PM_OPP
-+	help
-+	  This adds the CPUFreq driver for Qualcomm SoC based boards.
-+
-+	  If in doubt, say N.
-+
- config ARM_S3C_CPUFREQ
- 	bool
- 	help
---- a/drivers/cpufreq/Makefile
-+++ b/drivers/cpufreq/Makefile
-@@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= o
- obj-$(CONFIG_PXA25x)			+= pxa2xx-cpufreq.o
- obj-$(CONFIG_PXA27x)			+= pxa2xx-cpufreq.o
- obj-$(CONFIG_PXA3xx)			+= pxa3xx-cpufreq.o
-+obj-$(CONFIG_ARM_QCOM_CPUFREQ)		+= qcom-cpufreq.o
- obj-$(CONFIG_ARM_S3C24XX_CPUFREQ)	+= s3c24xx-cpufreq.o
- obj-$(CONFIG_ARM_S3C24XX_CPUFREQ_DEBUGFS) += s3c24xx-cpufreq-debugfs.o
- obj-$(CONFIG_ARM_S3C2410_CPUFREQ)	+= s3c2410-cpufreq.o
---- /dev/null
-+++ b/drivers/cpufreq/qcom-cpufreq.c
-@@ -0,0 +1,204 @@
-+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 and
-+ * only version 2 as published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/cpu.h>
-+#include <linux/err.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/of.h>
-+#include <linux/platform_device.h>
-+#include <linux/pm_opp.h>
-+#include <linux/slab.h>
-+#include <linux/cpufreq-dt.h>
-+
-+static void __init get_krait_bin_format_a(int *speed, int *pvs, int *pvs_ver)
-+{
-+	void __iomem *base;
-+	u32 pte_efuse;
-+
-+	*speed = *pvs = *pvs_ver = 0;
-+
-+	base = ioremap(0x007000c0, 4);
-+	if (!base) {
-+		pr_warn("Unable to read efuse data. Defaulting to 0!\n");
-+		return;
-+	}
-+
-+	pte_efuse = readl_relaxed(base);
-+	iounmap(base);
-+
-+	*speed = pte_efuse & 0xf;
-+	if (*speed == 0xf)
-+		*speed = (pte_efuse >> 4) & 0xf;
-+
-+	if (*speed == 0xf) {
-+		*speed = 0;
-+		pr_warn("Speed bin: Defaulting to %d\n", *speed);
-+	} else {
-+		pr_info("Speed bin: %d\n", *speed);
-+	}
-+
-+	*pvs = (pte_efuse >> 10) & 0x7;
-+	if (*pvs == 0x7)
-+		*pvs = (pte_efuse >> 13) & 0x7;
-+
-+	if (*pvs == 0x7) {
-+		*pvs = 0;
-+		pr_warn("PVS bin: Defaulting to %d\n", *pvs);
-+	} else {
-+		pr_info("PVS bin: %d\n", *pvs);
-+	}
-+}
-+
-+static void __init get_krait_bin_format_b(int *speed, int *pvs, int *pvs_ver)
-+{
-+	u32 pte_efuse, redundant_sel;
-+	void __iomem *base;
-+
-+	*speed = 0;
-+	*pvs = 0;
-+	*pvs_ver = 0;
-+
-+	base = ioremap(0xfc4b80b0, 8);
-+	if (!base) {
-+		pr_warn("Unable to read efuse data. Defaulting to 0!\n");
-+		return;
-+	}
-+
-+	pte_efuse = readl_relaxed(base);
-+	redundant_sel = (pte_efuse >> 24) & 0x7;
-+	*speed = pte_efuse & 0x7;
-+	/* 4 bits of PVS are in efuse register bits 31, 8-6. */
-+	*pvs = ((pte_efuse >> 28) & 0x8) | ((pte_efuse >> 6) & 0x7);
-+	*pvs_ver = (pte_efuse >> 4) & 0x3;
-+
-+	switch (redundant_sel) {
-+	case 1:
-+		*speed = (pte_efuse >> 27) & 0xf;
-+		break;
-+	case 2:
-+		*pvs = (pte_efuse >> 27) & 0xf;
-+		break;
-+	}
-+
-+	/* Check SPEED_BIN_BLOW_STATUS */
-+	if (pte_efuse & BIT(3)) {
-+		pr_info("Speed bin: %d\n", *speed);
-+	} else {
-+		pr_warn("Speed bin not set. Defaulting to 0!\n");
-+		*speed = 0;
-+	}
-+
-+	/* Check PVS_BLOW_STATUS */
-+	pte_efuse = readl_relaxed(base + 0x4) & BIT(21);
-+	if (pte_efuse) {
-+		pr_info("PVS bin: %d\n", *pvs);
-+	} else {
-+		pr_warn("PVS bin not set. Defaulting to 0!\n");
-+		*pvs = 0;
-+	}
-+
-+	pr_info("PVS version: %d\n", *pvs_ver);
-+	iounmap(base);
-+}
-+
-+static int __init qcom_cpufreq_populate_opps(void)
-+{
-+	int len, rows, cols, i, k, speed, pvs, pvs_ver;
-+	char table_name[] = "qcom,speedXX-pvsXX-bin-vXX";
-+	struct device_node *np;
-+	struct device *dev;
-+	int cpu = 0;
-+
-+	np = of_find_node_by_name(NULL, "qcom,pvs");
-+	if (!np)
-+		return -ENODEV;
-+
-+	if (of_property_read_bool(np, "qcom,pvs-format-a")) {
-+		get_krait_bin_format_a(&speed, &pvs, &pvs_ver);
-+		cols = 2;
-+	} else if (of_property_read_bool(np, "qcom,pvs-format-b")) {
-+		get_krait_bin_format_b(&speed, &pvs, &pvs_ver);
-+		cols = 3;
-+	} else {
-+		return -ENODEV;
-+	}
-+
-+	snprintf(table_name, sizeof(table_name),
-+			"qcom,speed%d-pvs%d-bin-v%d", speed, pvs, pvs_ver);
-+
-+	if (!of_find_property(np, table_name, &len))
-+		return -EINVAL;
-+
-+	len /= sizeof(u32);
-+	if (len % cols || len == 0)
-+		return -EINVAL;
-+
-+	rows = len / cols;
-+
-+	for (i = 0, k = 0; i < rows; i++) {
-+		u32 freq, volt;
-+
-+		of_property_read_u32_index(np, table_name, k++, &freq);
-+		of_property_read_u32_index(np, table_name, k++, &volt);
-+		while (k % cols)
-+			k++; /* Skip uA entries if present */
-+		for (cpu = 0; cpu < num_possible_cpus(); cpu++) {
-+			dev = get_cpu_device(cpu);
-+			if (!dev)
-+				return -ENODEV;
-+			if (dev_pm_opp_add(dev, freq, volt))
-+				pr_warn("failed to add OPP %u\n", freq);
-+		}
-+	}
-+
-+	return 0;
-+}
-+
-+static int __init qcom_cpufreq_driver_init(void)
-+{
-+	struct cpufreq_dt_platform_data pdata = { .independent_clocks = true };
-+	struct platform_device_info devinfo = {
-+		.name = "cpufreq-dt",
-+		.data = &pdata,
-+		.size_data = sizeof(pdata),
-+	};
-+	struct device *cpu_dev;
-+	struct device_node *np;
-+	int ret;
-+
-+	cpu_dev = get_cpu_device(0);
-+	if (!cpu_dev)
-+		return -ENODEV;
-+
-+	np = of_node_get(cpu_dev->of_node);
-+	if (!np)
-+		return -ENOENT;
-+
-+	if (!of_device_is_compatible(np, "qcom,krait")) {
-+		of_node_put(np);
-+		return -ENODEV;
-+	}
-+	of_node_put(np);
-+
-+	ret = qcom_cpufreq_populate_opps();
-+	if (ret)
-+		return ret;
-+
-+	return PTR_ERR_OR_ZERO(platform_device_register_full(&devinfo));
-+}
-+module_init(qcom_cpufreq_driver_init);
-+
-+MODULE_DESCRIPTION("Qualcomm CPUfreq driver");
-+MODULE_LICENSE("GPL v2");