ipq806x: add & enable cpufreq support

This change set enables frequency scaling on ipq806x, which speeds-up
the CPU and allows it to achieve its max frequency.

These patches are cherry-picked & backported from the following location:
*130-132: linux-next
*133-143: LKML - https://lkml.org/lkml/2015/3/21/15
*144: derived from other qcom similar dts
*145: derived from https://chromium.googlesource.com/chromiumos/third_party/kernel/+/chromeos-3.14/drivers/cpufreq/cpufreq-krait.c

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45730

1 files changed, 170 insertions, 0 deletions

diff --git a/target/linux/ipq806x/patches-3.18/136-clk-Add-safe-switch-hook.patch b/target/linux/ipq806x/patches-3.18/136-clk-Add-safe-switch-hook.patch
new file mode 100644
index 0000000000..227f8cea05
--- /dev/null
+++ b/target/linux/ipq806x/patches-3.18/136-clk-Add-safe-switch-hook.patch
@@ -0,0 +1,170 @@
+Content-Type: text/plain; charset="utf-8"
+MIME-Version: 1.0
+Content-Transfer-Encoding: 7bit
+Subject: [v3,04/13] clk: Add safe switch hook
+From: Stephen Boyd <sboyd@codeaurora.org>
+X-Patchwork-Id: 6063211
+Message-Id: <1426920332-9340-5-git-send-email-sboyd@codeaurora.org>
+To: Mike Turquette <mturquette@linaro.org>, Stephen Boyd <sboyd@codeaurora.org>
+Cc: linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org,
+	linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
+	Viresh Kumar <viresh.kumar@linaro.org>
+Date: Fri, 20 Mar 2015 23:45:23 -0700
+
+Sometimes clocks can't accept their parent source turning off
+while the source is reprogrammed to a different rate. Most
+notably CPU clocks require a way to switch away from the current
+PLL they're running on, reprogram that PLL to a new rate, and
+then switch back to the PLL with the new rate once they're done.
+Add a hook that drivers can implement allowing them to return a
+'safe parent' that they can switch their parent to while the
+upstream source is reprogrammed to support this.
+
+Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
+
+---
+This patch is good enough for Krait, but soon I'll need to 
+support a "safe rate" where we ask a clock what rate it needs to be running
+at to be sure it's within voltage constraints. Right now safe parent
+handles that problem on Krait, but on other platforms it won't work.
+
+ drivers/clk/clk.c            | 61 ++++++++++++++++++++++++++++++++++++++------
+ include/linux/clk-provider.h |  1 +
+ 2 files changed, 54 insertions(+), 8 deletions(-)
+
+--- a/drivers/clk/clk.c
++++ b/drivers/clk/clk.c
+@@ -1350,7 +1350,8 @@ out:
+ static void clk_calc_subtree(struct clk *clk, unsigned long new_rate,
+ 			     struct clk *new_parent, u8 p_index)
+ {
+-	struct clk *child;
++	struct clk *child, *parent;
++	struct clk_hw *parent_hw;
+ 
+ 	clk->new_rate = new_rate;
+ 	clk->new_parent = new_parent;
+@@ -1360,6 +1361,18 @@ static void clk_calc_subtree(struct clk
+ 	if (new_parent && new_parent != clk->parent)
+ 		new_parent->new_child = clk;
+ 
++	if (clk->ops->get_safe_parent) {
++		parent_hw = clk->ops->get_safe_parent(clk->hw);
++		if (parent_hw) {
++			parent = parent_hw->clk;
++			p_index = clk_fetch_parent_index(clk, parent);
++			clk->safe_parent_index = p_index;
++			clk->safe_parent = parent;
++		}
++	} else {
++		clk->safe_parent = NULL;
++	}
++
+ 	hlist_for_each_entry(child, &clk->children, child_node) {
+ 		child->new_rate = clk_recalc(child, new_rate);
+ 		clk_calc_subtree(child, child->new_rate, NULL, 0);
+@@ -1439,17 +1452,47 @@ out:
+  * so that in case of an error we can walk down the whole tree again and
+  * abort the change.
+  */
+-static struct clk *clk_propagate_rate_change(struct clk *clk, unsigned long event)
++static struct clk *clk_propagate_rate_change(struct clk *clk,
++					     unsigned long event)
+ {
+ 	struct clk *child, *tmp_clk, *fail_clk = NULL;
++	struct clk *old_parent;
+ 	int ret = NOTIFY_DONE;
+ 
+-	if (clk->rate == clk->new_rate)
++	if (clk->rate == clk->new_rate && event != POST_RATE_CHANGE)
+ 		return NULL;
+ 
++	switch (event) {
++	case PRE_RATE_CHANGE:
++		if (clk->safe_parent)
++			clk->ops->set_parent(clk->hw, clk->safe_parent_index);
++		clk->old_rate = clk->rate;
++		break;
++	case POST_RATE_CHANGE:
++		if (clk->safe_parent) {
++			old_parent = __clk_set_parent_before(clk,
++							     clk->new_parent);
++			if (clk->ops->set_rate_and_parent) {
++				clk->ops->set_rate_and_parent(clk->hw,
++						clk->new_rate,
++						clk->new_parent ?
++						clk->new_parent->rate : 0,
++						clk->new_parent_index);
++			} else if (clk->ops->set_parent) {
++				clk->ops->set_parent(clk->hw,
++						clk->new_parent_index);
++			}
++			__clk_set_parent_after(clk, clk->new_parent,
++					       old_parent);
++		}
++		break;
++	}
++
+ 	if (clk->notifier_count) {
+-		ret = __clk_notify(clk, event, clk->rate, clk->new_rate);
+-		if (ret & NOTIFY_STOP_MASK)
++		if (event != POST_RATE_CHANGE || clk->old_rate != clk->rate)
++			ret = __clk_notify(clk, event, clk->old_rate,
++					   clk->new_rate);
++		if (ret & NOTIFY_STOP_MASK && event != POST_RATE_CHANGE)
+ 			fail_clk = clk;
+ 	}
+ 
+@@ -1494,7 +1537,8 @@ static void clk_change_rate(struct clk *
+ 
+ 	old_rate = clk->rate;
+ 
+-	if (clk->new_parent && clk->new_parent != clk->parent) {
++	if (clk->new_parent && clk->new_parent != clk->parent &&
++			!clk->safe_parent) {
+ 		old_parent = __clk_set_parent_before(clk, clk->new_parent);
+ 
+ 		if (clk->ops->set_rate_and_parent) {
+@@ -1514,9 +1558,6 @@ static void clk_change_rate(struct clk *
+ 
+ 	clk->rate = clk->new_rate;
+ 
+-	if (clk->notifier_count && old_rate != clk->rate)
+-		__clk_notify(clk, POST_RATE_CHANGE, old_rate, clk->rate);
+-
+ 	/*
+ 	 * Use safe iteration, as change_rate can actually swap parents
+ 	 * for certain clock types.
+@@ -1601,6 +1642,8 @@ int clk_set_rate(struct clk *clk, unsign
+ 	/* change the rates */
+ 	clk_change_rate(top, parent_rate);
+ 
++	clk_propagate_rate_change(top, POST_RATE_CHANGE);
++
+ out:
+ 	clk_prepare_unlock();
+ 
+--- a/include/linux/clk-provider.h
++++ b/include/linux/clk-provider.h
+@@ -179,6 +179,7 @@ struct clk_ops {
+ 					struct clk **best_parent_clk);
+ 	int		(*set_parent)(struct clk_hw *hw, u8 index);
+ 	u8		(*get_parent)(struct clk_hw *hw);
++	struct clk_hw	*(*get_safe_parent)(struct clk_hw *hw);
+ 	int		(*set_rate)(struct clk_hw *hw, unsigned long rate,
+ 				    unsigned long parent_rate);
+ 	int		(*set_rate_and_parent)(struct clk_hw *hw,
+--- a/include/linux/clk-private.h
++++ b/include/linux/clk-private.h
+@@ -38,8 +38,11 @@ struct clk {
+ 	struct clk		**parents;
+ 	u8			num_parents;
+ 	u8			new_parent_index;
++	u8			safe_parent_index;
+ 	unsigned long		rate;
++	unsigned long		old_rate;
+ 	unsigned long		new_rate;
++	struct clk		*safe_parent;
+ 	struct clk		*new_parent;
+ 	struct clk		*new_child;
+ 	unsigned long		flags;