ipq806x: Add support for linux-4.4

1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>

1 files changed, 0 insertions, 50 deletions

diff --git a/target/linux/ipq806x/patches-3.18/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch b/target/linux/ipq806x/patches-3.18/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
deleted file mode 100644
index 6876768962..0000000000
--- a/target/linux/ipq806x/patches-3.18/013-ARM-msm-add-watchdog-entries-to-DT-timer-binding-doc.patch
+++ /dev/null
@@ -1,50 +0,0 @@
-From e535f01dffb6dd9e09934fa219be52af3437a8f6 Mon Sep 17 00:00:00 2001
-From: Mathieu Olivari <mathieu@codeaurora.org>
-Date: Thu, 19 Feb 2015 20:36:27 -0800
-Subject: [PATCH 3/3] ARM: msm: add watchdog entries to DT timer binding doc
-
-The watchdog has been reworked to use the same DT node as the timer.
-This change is updating the device tree doc accordingly.
-
-Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
----
- Documentation/devicetree/bindings/arm/msm/timer.txt | 16 +++++++++++++---
- 1 file changed, 13 insertions(+), 3 deletions(-)
-
---- a/Documentation/devicetree/bindings/arm/msm/timer.txt
-+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
-@@ -9,11 +9,17 @@ Properties:
-                "qcom,scss-timer" - scorpion subsystem
- 
- - interrupts : Interrupts for the the debug timer, the first general purpose
--               timer, and optionally a second general purpose timer in that
--               order.
-+               timer, and optionally a second general purpose timer, and
-+               optionally as well, 2 watchdog interrupts, in that order.
- 
- - reg : Specifies the base address of the timer registers.
- 
-+- clocks: Reference to the parent clocks, one per output clock. The parents
-+          must appear in the same order as the clock names.
-+
-+- clock-names: The name of the clocks as free-form strings. They should be in
-+               the same order as the clocks.
-+
- - clock-frequency : The frequency of the debug timer and the general purpose
-                     timer(s) in Hz in that order.
- 
-@@ -29,9 +35,13 @@ Example:
-                compatible = "qcom,scss-timer", "qcom,msm-timer";
-                interrupts = <1 1 0x301>,
-                             <1 2 0x301>,
--                            <1 3 0x301>;
-+                            <1 3 0x301>,
-+                            <1 4 0x301>,
-+                            <1 5 0x301>;
-                reg = <0x0200a000 0x100>;
-                clock-frequency = <19200000>,
-                                  <32768>;
-+               clocks = <&sleep_clk>;
-+               clock-names = "sleep";
-                cpu-offset = <0x40000>;
-        };