aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/image
diff options
context:
space:
mode:
authorRodrigo Balerdi <lanchon@gmail.com>2022-04-07 03:18:59 -0300
committerSungbo Eo <mans0n@gorani.run>2022-05-05 09:19:00 +0900
commitf8b0010dfb548469686049f85076fd6a3a6bca2e (patch)
tree17eed330a8f40252b96594311f8252b003d5fbfd /target/linux/ipq806x/image
parentf4e219fd5e6cfa33d234dad134fb105cc1620f54 (diff)
downloadupstream-f8b0010dfb548469686049f85076fd6a3a6bca2e.tar.gz
upstream-f8b0010dfb548469686049f85076fd6a3a6bca2e.tar.bz2
upstream-f8b0010dfb548469686049f85076fd6a3a6bca2e.zip
ipq806x: add support for Arris TR4400 v2 / RAC2V1A
Hardware specs: SoC: Qualcomm IPQ8065 (dual core Cortex-A15) RAM: 512 MB DDR3 Flash: 256 MB NAND, 32 MB NOR WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz Switch: QCA8337 Ethernet: 5x 10/100/1000 Mbit/s USB: 1x USB 3.0 Type-A Buttons: WPS, Reset Power: 12 VDC, 2.5 A Ethernet ports: 1x WAN: connected to eth2 4x LAN: connected via the switch to eth0 and eth1 (eth0 is disabled in OEM firmware) MAC addresses (OEM and OpenWrt): fw_env @ 0x00 d4:ab:82:??:??:?a LAN (eth1) fw_env @ 0x06 d4:ab:82:??:??:?b WAN (eth2) fw_env @ 0x0c d4:ab:82:??:??:?c WLAN 2.4 GHz (ath1) fw_env @ 0x12 d4:ab:82:??:??:?d WLAN 5 GHz (ath0) fw_env @ 0x18 d4:ab:82:??:??:?e OEM usage unknown (eth0 in OpenWrt) OID d4:ab:82 is registered to: ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US More info: https://openwrt.org/inbox/toh/arris/tr4400_v2 IMPORTANT: This port requires moving the 'fw_env' partition prior to first boot to consolidate 70% of the usable space in flash into a contiguous partition. 'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords. Its contents must be copied to 'rootfs_1' prior to booting via initramfs. Note that the stock 'fw_env' partition will be wiped during sysupgrade. A writable 'stock_fw_env' partition pointing to the old, stock location is included in the port to help rolling back this change if desired. Installation: - Requires serial access and a TFTP server. - Fully boot stock, press ENTER, type in: mtd erase /dev/mtd21 dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21 umount /config && ubidetach -m 23 && mtd erase /dev/mtd23 - Reboot and interrupt U-Boot by pressing a key, type in: set mtdids 'nand0=nand0' set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)' set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm' env save - Setup TFTP server serving initramfs image as 'recovery.bin', type in: set ipaddr 192.168.1.1 set serverip 192.168.1.2 tftpboot recovery.bin && bootm - Use sysupgrade to install squashfs image. This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>. Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com> [add 5.15 changes for 0069-arm-boot-add-dts-files.patch] Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ipq806x/image')
-rw-r--r--target/linux/ipq806x/image/generic.mk13
1 files changed, 13 insertions, 0 deletions
diff --git a/target/linux/ipq806x/image/generic.mk b/target/linux/ipq806x/image/generic.mk
index 819c73d338..469f2c654e 100644
--- a/target/linux/ipq806x/image/generic.mk
+++ b/target/linux/ipq806x/image/generic.mk
@@ -65,6 +65,19 @@ define Device/ZyXELImage
append-metadata
endef
+define Device/arris_tr4400-v2
+ $(call Device/LegacyImage)
+ DEVICE_VENDOR := Arris
+ DEVICE_MODEL := TR4400
+ DEVICE_VARIANT := v2
+ SOC := qcom-ipq8065
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ath10k-firmware-qca9984-ct ath10k-firmware-qca99x0-ct
+ KERNEL_IN_UBI := 1
+endef
+TARGET_DEVICES += arris_tr4400-v2
+
define Device/askey_rt4230w-rev6
$(call Device/LegacyImage)
DEVICE_VENDOR := Askey