diff options
| author | Sebastian Quilitz <zeraphim@x-pantion.de> | 2016-11-23 18:51:15 +0100 |
|---|---|---|
| committer | Mathias Kresin <dev@kresin.me> | 2016-11-24 22:37:40 +0100 |
| commit | ae79c41286f0d9a97f2641450240ecac5465677d (patch) | |
| tree | 03b5e25c4d5792e730add0a6a9ddf0e323e1f842 /target/linux/ipq806x/image/Makefile | |
| parent | 0e7869f20492a76fc1f331101fa01bfe9f02692f (diff) | |
| download | upstream-ae79c41286f0d9a97f2641450240ecac5465677d.tar.gz upstream-ae79c41286f0d9a97f2641450240ecac5465677d.tar.bz2 upstream-ae79c41286f0d9a97f2641450240ecac5465677d.zip | |
ipq806x: add support for TP-Link Archer VR2600v
This router is similar to the C2600. Ethernet on WAN + LAN, switch,
sysupgrade, LEDs, buttons and WiFi on 2G + 5G do work. The xDSL modem
and the POTS/DECT interface are not supported yet.
It is not possible to flash LEDE via the TP-Link webinterface. The
image need to be signed. The first 0x200 bytes of the image is the
TP-Link header including the signature. The signature is not validated
by the bootloader. The LEDE image is zeroed in this area.
To install LEDE it is necessary to solder a four pin header to JP2.
Connect a serial interface to this header and interrupt the autostart
of kernel. Transfer the sysupgrade image via TFTP and write it to the
serial flash at 0x320000.
Signed-off-by: Sebastian Quilitz <zeraphim@x-pantion.de>
Diffstat (limited to 'target/linux/ipq806x/image/Makefile')
| -rw-r--r-- | target/linux/ipq806x/image/Makefile | 19 |
1 files changed, 18 insertions, 1 deletions
diff --git a/target/linux/ipq806x/image/Makefile b/target/linux/ipq806x/image/Makefile index 47c28ab651..3cc48bb905 100644 --- a/target/linux/ipq806x/image/Makefile +++ b/target/linux/ipq806x/image/Makefile @@ -224,6 +224,23 @@ define Device/NBG6817 $(call Device/ZyXELImage) endef -TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 R7500 R7500v2 R7800 NBG6817 +define Device/VR2600v + PROFILES += $$(DEVICE_NAME) + FILESYSTEMS := squashfs + KERNEL_SUFFIX := -uImage + KERNEL = kernel-bin | append-dtb | uImage none + KERNEL_NAME := zImage + KERNEL_SIZE := 2097152 + DEVICE_DTS := qcom-ipq8064-vr2600v + BLOCKSIZE := 128k + PAGESIZE := 2048 + BOARD_NAME := vr2600v + DEVICE_TITLE := TP-Link Archer VR2600v + DEVICE_PACKAGES := ath10k-firmware-qca99x0 + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin := pad-extra 512 | append-kernel | pad-to $$$${KERNEL_SIZE} | append-rootfs | pad-rootfs | append-metadata +endef + +TARGET_DEVICES += AP148 AP148-legacy C2600 D7800 DB149 EA8500 R7500 R7500v2 R7800 NBG6817 VR2600v $(eval $(call BuildImage)) |