ipq806x: move further common nodes to the DTSI files

The moves a few additional common nodes to the common DTSI files
for qcom-ipq8064-v2.0 and qcom-ipq8065 devices.

Remove a few redundant definitions on the way.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

15 files changed, 53 insertions, 252 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index a23f3da469..a28927cde7 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -28,13 +28,6 @@
 	status = "okay";
 };
 
-/*
-* The i2c device on gsbi4 should not be enabled.
-* On ipq806x designs gsbi4 i2c is meant for exclusive
-* RPM usage. Turning this on in kernel manifests as
-* i2c failure for the RPM.
-*/
-
 &flash {
 	partitions {
 		compatible = "qcom,smem";
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index 59c06dbccc..f86f61f5ca 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -36,13 +36,6 @@
 	};
 };
 
-/*
-* The i2c device on gsbi4 should not be enabled.
-* On ipq806x designs gsbi4 i2c is meant for exclusive
-* RPM usage. Turning this on in kernel manifests as
-* i2c failure for the RPM.
-*/
-
 &flash {
 	partitions {
 		compatible = "qcom,smem";
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
index c6d7da3917..1f2cd247b6 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-c2600.dts
@@ -11,16 +11,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		mdio-gpio0 = &mdio0;
 
@@ -175,20 +165,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
 &gsbi5 {
 	qcom,mode = <GSBI_PROT_SPI>;
 	status = "okay";
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
index 5bd195955a..dc25a42403 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-d7800.dts
@@ -11,16 +11,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		mdio-gpio0 = &mdio0;
 
@@ -152,26 +142,11 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
 &sata_phy {
 	status = "okay";
 };
 
 &sata {
-	ports-implemented = <0x1>;
 	status = "okay";
 };
 
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
index 6454fae7f7..8001b17e81 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea7500-v1.dts
@@ -12,19 +12,7 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
-		serial0 = &gsbi4_serial;
-
 		led-boot = &led_power;
 		led-failsafe = &led_power;
 		led-running = &led_power;
@@ -33,7 +21,7 @@
 
 	chosen {
 		bootargs = "console=ttyMSM0,115200n8";
-		stdout-path = "serial0:115200n8";
+
 		append-rootblock = "ubi.mtd=";  /* append to bootargs adding the root deviceblock nbr from bootloader */
 		find-rootblock = "ubi.mtd=";  /* look for root deviceblock nbr in this bootarg */
 	};
@@ -89,20 +77,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
 &usb3_0 {
 	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index 7110f8943a..9c5d163919 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -11,16 +11,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		mdio-gpio0 = &mdio0;
 
@@ -102,20 +92,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
 &sata_phy {
 	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index c1fb3b5534..868d1e9a9a 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -133,13 +133,6 @@
 	};
 };
 
-/*
-* The i2c device on gsbi4 should not be enabled.
-* On ipq806x designs gsbi4 i2c is meant for exclusive
-* RPM usage. Turning this on in kernel manifests as
-* i2c failure for the RPM.
-*/
-
 &gsbi5 {
 	status = "disabled";
 
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
index 015de3d2b1..8cb6376ee7 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts
@@ -12,14 +12,6 @@
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-
 		rsvd@5fe00000 {
 			reg = <0x5fe00000 0x200000>;
 			reusable;
@@ -161,20 +153,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
 &sata_phy {
 	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
index c0bcee783d..350965200b 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -8,6 +8,32 @@
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	* The i2c device on gsbi4 should not be enabled.
+	* On ipq806x designs gsbi4 i2c is meant for exclusive
+	* RPM usage. Turning this on in kernel manifests as
+	* i2c failure for the RPM.
+	*/
 };
 
 &CPU_SPC {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
index 5de089eab4..8cc69bca88 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts
@@ -11,16 +11,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		mdio-gpio0 = &mdio0;
 
@@ -164,20 +154,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
 &gsbi5 {
 	qcom,mode = <GSBI_PROT_SPI>;
 	status = "okay";
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
index f8a0d07016..322968dfdb 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts
@@ -11,16 +11,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		mdio-gpio0 = &mdio0;
 
@@ -187,15 +177,6 @@
 	};
 };
 
-&gsbi4 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
-&gsbi4_serial {
-	status = "okay";
-};
-
 &gsbi5 {
 	status = "okay";
 
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
index 557ea61452..812757131a 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts
@@ -12,16 +12,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		led-boot = &power;
 		led-failsafe = &diag;
@@ -245,14 +235,7 @@
 	};
 };
 
-&gsbi4 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
 &gsbi4_serial {
-	status = "okay";
-
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
 };
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
index 02cb4dc7e8..dab5c4ccd5 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts
@@ -11,16 +11,6 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-	};
-
 	aliases {
 		mdio-gpio0 = &mdio0;
 		sdcc1 = &sdcc1;
@@ -172,20 +162,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
 &gsbi5 {
 	qcom,mode = <GSBI_PROT_SPI>;
 	status = "okay";
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
index f7cc8643f1..7b272b74ca 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065-r7800.dts
@@ -12,14 +12,6 @@
 	};
 
 	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		rsvd@41200000 {
-			reg = <0x41200000 0x300000>;
-			no-map;
-		};
-
 		rsvd@5fe00000 {
 			reg = <0x5fe00000 0x200000>;
 			reusable;
@@ -234,22 +226,6 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
 &nand_controller {
 	status = "okay";
 
@@ -416,7 +392,6 @@
 };
 
 &sata {
-	ports-implemented = <0x1>;
 	status = "okay";
 };
 
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
index 0a58c97095..b706bfa3a7 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -17,6 +17,32 @@
 			qcom,l2-cpufreq = <384000000 600000000 1400000000>;
 		};
 	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		rsvd@41200000 {
+			reg = <0x41200000 0x300000>;
+			no-map;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+	* The i2c device on gsbi4 should not be enabled.
+	* On ipq806x designs gsbi4 i2c is meant for exclusive
+	* RPM usage. Turning this on in kernel manifests as
+	* i2c failure for the RPM.
+	*/
 };
 
 &pcie0 {