ipq806x: use qcom-ipq8064-v1.0.dtsi from upstream

This uses upstream qcom-ipq8064-v1.0.dtsi and modifies it by patches
instead of keeping a local version. As a consequence:

- we use a part of the shared definitions there and update device
  DTS files accordingly
- we move additional stuff from our local v1.0.dtsi to the patch
- we drop partitions, LEDs and keys from the file as we will
  implement them differently anyway

Like with the previous patch, this follows the idea that a diff
from upstream might be easier to handle than a big file of our
own with different distribution pattern of properties.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

6 files changed, 71 insertions, 222 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
index 6c3410bf35..a23f3da469 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
@@ -28,46 +28,16 @@
 	status = "okay";
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-
-	serial@16340000 {
-		status = "okay";
-	};
-
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		m25p80@0 {
-			compatible = "s25fl256s1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "qcom,smem";
-			};
-		};
+/*
+* The i2c device on gsbi4 should not be enabled.
+* On ipq806x designs gsbi4 i2c is meant for exclusive
+* RPM usage. Turning this on in kernel manifests as
+* i2c failure for the RPM.
+*/
+
+&flash {
+	partitions {
+		compatible = "qcom,smem";
 	};
 };
 
@@ -156,11 +126,3 @@
 		full-duplex;
 	};
 };
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
index 41a2bf116e..59c06dbccc 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ap161.dts
@@ -36,56 +36,19 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
-	};
-
-	/*
-	* The i2c device on gsbi4 should not be enabled.
-	* On ipq806x designs gsbi4 i2c is meant for exclusive
-	* RPM usage. Turning this on in kernel manifests as
-	* i2c failure for the RPM.
-	*/
-};
-
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		m25p80@0 {
-			compatible = "s25fl256s1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-
-			partitions {
-				compatible = "qcom,smem";
-			};
-		};
+/*
+* The i2c device on gsbi4 should not be enabled.
+* On ipq806x designs gsbi4 i2c is meant for exclusive
+* RPM usage. Turning this on in kernel manifests as
+* i2c failure for the RPM.
+*/
+
+&flash {
+	partitions {
+		compatible = "qcom,smem";
 	};
 };
 
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
-};
-
 &usb3_0 {
 	status = "okay";
 };
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
index 1f68f826cb..8e8d942fbd 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-db149.dts
@@ -38,61 +38,41 @@
 	};
 };
 
-&gsbi5 {
-	qcom,mode = <GSBI_PROT_SPI>;
-	status = "okay";
-
-	spi4: spi@1a280000 {
-		status = "okay";
-		spi-max-frequency = <50000000>;
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
-
-		cs-gpios = <&qcom_pinmux 20 0>;
-
-		m25p80@0 {
-			compatible = "s25fl256s1";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			spi-max-frequency = <50000000>;
-			reg = <0>;
-			m25p,fast-read;
-
-			partition@0 {
-				label = "lowlevel_init";
-				reg = <0x0 0x1b0000>;
-			};
-
-			partition@1 {
-				label = "u-boot";
-				reg = <0x1b0000 0x80000>;
-			};
-
-			partition@2 {
-				label = "u-boot-env";
-				reg = <0x230000 0x40000>;
-			};
-
-			partition@3 {
-				label = "caldata";
-				reg = <0x270000 0x40000>;
-			};
-
-			partition@4 {
-				label = "firmware";
-				reg = <0x2b0000 0x1d50000>;
-			};
-		};
-	};
+&gsbi4 {
+	status = "disabled";
 };
 
-&sata_phy {
-	status = "okay";
+&gsbi4_serial {
+	status = "disabled";
 };
 
-&sata {
-	status = "okay";
+&flash {
+	m25p,fast-read;
+
+	partition@0 {
+		label = "lowlevel_init";
+		reg = <0x0 0x1b0000>;
+	};
+
+	partition@1 {
+		label = "u-boot";
+		reg = <0x1b0000 0x80000>;
+	};
+
+	partition@2 {
+		label = "u-boot-env";
+		reg = <0x230000 0x40000>;
+	};
+
+	partition@3 {
+		label = "caldata";
+		reg = <0x270000 0x40000>;
+	};
+
+	partition@4 {
+		label = "firmware";
+		reg = <0x2b0000 0x1d50000>;
+	};
 };
 
 &usb3_0 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
index 49b34a32c6..c1fb3b5534 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-r7500.dts
@@ -133,26 +133,19 @@
 	};
 };
 
-&gsbi4 {
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-	status = "okay";
-	serial@16340000 {
-		status = "okay";
+/*
+* The i2c device on gsbi4 should not be enabled.
+* On ipq806x designs gsbi4 i2c is meant for exclusive
+* RPM usage. Turning this on in kernel manifests as
+* i2c failure for the RPM.
+*/
+
+&gsbi5 {
+	status = "disabled";
+
+	spi@1a280000 {
+		status = "disabled";
 	};
-	/*
-		* The i2c device on gsbi4 should not be enabled.
-		* On ipq806x designs gsbi4 i2c is meant for exclusive
-		* RPM usage. Turning this on in kernel manifests as
-		* i2c failure for the RPM.
-		*/
-};
-
-&sata_phy {
-	status = "okay";
-};
-
-&sata {
-	status = "okay";
 };
 
 &usb3_0 {
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
deleted file mode 100644
index 8d93f5c3ed..0000000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ /dev/null
@@ -1,31 +0,0 @@
-#include "qcom-ipq8064.dtsi"
-
-/ {
-	aliases {
-		serial0 = &gsbi4_serial;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-};
-
-&CPU_SPC {
-	status = "okay";
-};
-
-&pcie0 {
-	phy-tx0-term-offset = <7>;
-};
-
-&pcie1 {
-	phy-tx0-term-offset = <7>;
-};
-
-&pcie2 {
-	phy-tx0-term-offset = <7>;
-};
-
-&sata {
-	ports-implemented = <0x1>;
-};
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
index 6dc1f92751..c4d2187ef6 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts
@@ -336,39 +336,21 @@
 	};
 };
 
-&gsbi4 {
-	status = "okay";
-	qcom,mode = <GSBI_PROT_I2C_UART>;
-};
-
 &gsbi4_serial {
-	status = "okay";
-
 	pinctrl-0 = <&uart0_pins>;
 	pinctrl-names = "default";
 };
 
-&gsbi5 {
-	status = "okay";
-
-	qcom,mode = <GSBI_PROT_SPI>;
-
-	spi@1a280000 {
-		status = "okay";
-
-		pinctrl-0 = <&spi_pins>;
-		pinctrl-names = "default";
+&flash {
+	compatible = "jedec,spi-nor";
+};
 
-		cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
+&sata_phy {
+	status = "disabled";
+};
 
-		s25fl256s1@0 {
-			compatible = "jedec,spi-nor";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0>;
-			spi-max-frequency = <50000000>;
-		};
-	};
+&sata {
+	status = "disabled";
 };
 
 &ss_phy_0 {		/* USB3 port 0 SS phy */