ipq806x: use qcom-ipq8064.dtsi from upstream

Though a qcom-ipq8064.dtsi file exists upstream, we still do overwrite
it with a full version of our own in the ipq806x target. About half of
the contents of our file are upstream content, the other half are local
improvements.

To prevent us from having a lot of code maintained twice in parallel,
this adjusts the target to use the upstream qcom-ipq8064.dtsi. Our
local changes are arranged into three patches, the first pulling a
commit from upstream, the second doing a few small adjustments, and
the third adding all additional stuff.

This should get us the best of both worlds.

The property "ports-implemented" on sata@29000000 is moved to
2nd-level DTSI files as kernel defines it there as well.

While at, rename 080-ARM-dts-qcom-add-gpio-ranges-property.patch to
include the kernel version where it's added upstream.

Even though this might look more complicated in the first place,
the aim is to bring our files closer to upstream, so we can benefit
from changes directly and vice-versa. After all, this drop about
650 lines just copied from the upstream DTSI file.

Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>

4 files changed, 12 insertions, 1578 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
index 40cae75746..8d93f5c3ed 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v1.0.dtsi
@@ -25,3 +25,7 @@
 &pcie2 {
 	phy-tx0-term-offset = <7>;
 };
+
+&sata {
+	ports-implemented = <0x1>;
+};
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
index 3a2bb6aebc..5d762046af 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-v2.0.dtsi
@@ -26,6 +26,10 @@
 	phy-tx0-term-offset = <0>;
 };
 
+&sata {
+	ports-implemented = <0x1>;
+};
+
 &ss_phy_0 {
 	rx_eq = <2>;
 	tx_deamp_3_5db = <32>;
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi
deleted file mode 100644
index 38d77b6c0b..0000000000
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ /dev/null
@@ -1,1578 +0,0 @@
-/dts-v1/;
-
-#include <dt-bindings/clock/qcom,gcc-ipq806x.h>
-#include <dt-bindings/mfd/qcom-rpm.h>
-#include <dt-bindings/clock/qcom,rpmcc.h>
-#include <dt-bindings/clock/qcom,lcc-ipq806x.h>
-#include <dt-bindings/soc/qcom,gsbi.h>
-#include <dt-bindings/reset/qcom,gcc-ipq806x.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/gpio/gpio.h>
-
-/ {
-	model = "Qualcomm IPQ8064";
-	compatible = "qcom,ipq8064";
-	interrupt-parent = <&intc>;
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	memory { device_type = "memory"; reg = <0 0>; };
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu0: cpu@0 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acpu0_aux>;
-			qcom,saw = <&saw0>;
-			clocks = <&kraitcc 0>, <&kraitcc 4>;
-			clock-names = "cpu", "l2";
-			clock-latency = <100000>;
-			cpu-supply = <&smb208_s2a>;
-			operating-points-v2 = <&opp_table0>;
-			voltage-tolerance = <5>;
-			cooling-min-state = <0>;
-			cooling-max-state = <10>;
-			#cooling-cells = <2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		cpu1: cpu@1 {
-			compatible = "qcom,krait";
-			enable-method = "qcom,kpss-acc-v1";
-			device_type = "cpu";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			qcom,acc = <&acpu1_aux>;
-			qcom,saw = <&saw1>;
-			clocks = <&kraitcc 1>, <&kraitcc 4>;
-			clock-names = "cpu", "l2";
-			clock-latency = <100000>;
-			cpu-supply = <&smb208_s2b>;
-			operating-points-v2 = <&opp_table0>;
-			voltage-tolerance = <5>;
-			cooling-min-state = <0>;
-			cooling-max-state = <10>;
-			#cooling-cells = <2>;
-			cpu-idle-states = <&CPU_SPC>;
-		};
-
-		L2: l2-cache {
-			compatible = "cache";
-			cache-level = <2>;
-			qcom,saw = <&saw_l2>;
-		};
-
-		qcom,l2 {
-			qcom,l2-rates = <384000000 1000000000 1200000000>;
-			qcom,l2-cpufreq = <384000000 600000000 1200000000>;
-			qcom,l2-volt = <1100000 1100000 1150000>;
-			qcom,l2-supply = <&smb208_s1a>;
-		};
-
-		idle-states {
-			CPU_SPC: spc {
-				compatible = "qcom,idle-state-spc",
-						"arm,idle-state";
-				status = "disabled";
-				entry-latency-us = <400>;
-				exit-latency-us = <900>;
-				min-residency-us = <3000>;
-			};
-		};
-	};
-
-	opp_table0: opp_table0 {
-		compatible = "operating-points-v2-qcom-cpu";
-		nvmem-cells = <&speedbin_efuse>;
-
-		opp-384000000 {
-			opp-hz = /bits/ 64 <384000000>;
-			opp-microvolt-speed0-pvs0-v0 = <1000000>;
-			opp-microvolt-speed0-pvs1-v0 = <925000>;
-			opp-microvolt-speed0-pvs2-v0 = <875000>;
-			opp-microvolt-speed0-pvs3-v0 = <800000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <100000>;
-		};
-
-		opp-600000000 {
-			opp-hz = /bits/ 64 <600000000>;
-			opp-microvolt-speed0-pvs0-v0 = <1050000>;
-			opp-microvolt-speed0-pvs1-v0 = <975000>;
-			opp-microvolt-speed0-pvs2-v0 = <925000>;
-			opp-microvolt-speed0-pvs3-v0 = <850000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <100000>;
-		};
-
-		opp-800000000 {
-			opp-hz = /bits/ 64 <800000000>;
-			opp-microvolt-speed0-pvs0-v0 = <1100000>;
-			opp-microvolt-speed0-pvs1-v0 = <1025000>;
-			opp-microvolt-speed0-pvs2-v0 = <995000>;
-			opp-microvolt-speed0-pvs3-v0 = <900000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <100000>;
-		};
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt-speed0-pvs0-v0 = <1150000>;
-			opp-microvolt-speed0-pvs1-v0 = <1075000>;
-			opp-microvolt-speed0-pvs2-v0 = <1025000>;
-			opp-microvolt-speed0-pvs3-v0 = <950000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <100000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt-speed0-pvs0-v0 = <1200000>;
-			opp-microvolt-speed0-pvs1-v0 = <1125000>;
-			opp-microvolt-speed0-pvs2-v0 = <1075000>;
-			opp-microvolt-speed0-pvs3-v0 = <1000000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <100000>;
-		};
-
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt-speed0-pvs0-v0 = <1250000>;
-			opp-microvolt-speed0-pvs1-v0 = <1175000>;
-			opp-microvolt-speed0-pvs2-v0 = <1125000>;
-			opp-microvolt-speed0-pvs3-v0 = <1050000>;
-			opp-supported-hw = <0x1>;
-			clock-latency-ns = <100000>;
-		};
-
-	};
-
-	thermal-zones {
-		tsens_tz_sensor0 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 0>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor1 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 1>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor2 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 2>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor3 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 3>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor4 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 4>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor5 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 5>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor6 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 6>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor7 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 7>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor8 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 8>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor9 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 9>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-
-		tsens_tz_sensor10 {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
-			thermal-sensors = <&tsens 10>;
-
-			trips {
-				cpu-critical-hi {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical_high";
-				};
-
-				cpu-config-hi {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "configurable_hi";
-				};
-
-				cpu-config-lo {
-					temperature = <95000>;
-					hysteresis = <2000>;
-					type = "configurable_lo";
-				};
-
-				cpu-critical-low {
-					temperature = <0>;
-					hysteresis = <2000>;
-					type = "critical_low";
-				};
-			};
-		};
-	};
-
-	cpu-pmu {
-		compatible = "qcom,krait-pmu";
-		interrupts = <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) |
-					  IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		nss@40000000 {
-			reg = <0x40000000 0x1000000>;
-			no-map;
-		};
-
-		smem: smem@41000000 {
-			reg = <0x41000000 0x200000>;
-			no-map;
-		};
-	};
-
-	clocks {
-		cxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		pxo_board {
-			compatible = "fixed-clock";
-			#clock-cells = <0>;
-			clock-frequency = <25000000>;
-		};
-
-		sleep_clk: sleep_clk {
-			compatible = "fixed-clock";
-			clock-frequency = <32768>;
-			#clock-cells = <0>;
-		};
-	};
-
-	fab-scaling {
-		compatible = "qcom,fab-scaling";
-		clocks = <&rpmcc RPM_APPS_FABRIC_A_CLK>, <&rpmcc RPM_EBI1_A_CLK>;
-		clock-names = "apps-fab-clk", "ddr-fab-clk";
-		fab_freq_high = <533000000>;
-		fab_freq_nominal = <400000000>;
-		cpu_freq_threshold = <1000000000>;
-	};
-
-	firmware {
-		scm {
-			compatible = "qcom,scm-ipq806x";
-		};
-	};
-
-	soc: soc {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-		compatible = "simple-bus";
-
-		lpass@28100000 {
-			compatible = "qcom,lpass-cpu";
-			status = "disabled";
-			clocks = <&lcc AHBIX_CLK>,
-					<&lcc MI2S_OSR_CLK>,
-					<&lcc MI2S_BIT_CLK>;
-			clock-names = "ahbix-clk",
-					"mi2s-osr-clk",
-					"mi2s-bit-clk";
-			interrupts = <GIC_SPI 85 IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "lpass-irq-lpaif";
-			reg = <0x28100000 0x10000>;
-			reg-names = "lpass-lpaif";
-		};
-
-		qfprom: qfprom@700000 {
-			compatible = "qcom,qfprom", "syscon";
-			reg = <0x700000 0x1000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			status = "okay";
-			tsens_calib: calib@400 {
-				reg = <0x400 0xb>;
-			};
-			tsens_backup: backup@410 {
-				reg = <0x410 0xb>;
-			};
-			speedbin_efuse: speedbin@0c0 {
-				reg = <0x0c0 0x4>;
-			};
-		};
-
-		rpm: rpm@108000 {
-			compatible = "qcom,rpm-ipq8064";
-			reg = <0x108000 0x1000>;
-			qcom,ipc = <&l2cc 0x8 2>;
-
-			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-					 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-					 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "ack",
-					  "err",
-					  "wakeup";
-
-			clocks = <&gcc RPM_MSG_RAM_H_CLK>;
-			clock-names = "ram";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			rpmcc: clock-controller {
-				compatible	= "qcom,rpmcc-ipq806x", "qcom,rpmcc";
-				#clock-cells = <1>;
-			};
-
-			regulators {
-				compatible = "qcom,rpm-smb208-regulators";
-
-				smb208_s1a: s1a {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1150000>;
-
-					qcom,switch-mode-frequency = <1200000>;
-
-				};
-
-				smb208_s1b: s1b {
-					regulator-min-microvolt = <1050000>;
-					regulator-max-microvolt = <1150000>;
-
-					qcom,switch-mode-frequency = <1200000>;
-				};
-
-				smb208_s2a: s2a {
-					regulator-min-microvolt = < 800000>;
-					regulator-max-microvolt = <1250000>;
-
-					qcom,switch-mode-frequency = <1200000>;
-				};
-
-				smb208_s2b: s2b {
-					regulator-min-microvolt = < 800000>;
-					regulator-max-microvolt = <1250000>;
-
-					qcom,switch-mode-frequency = <1200000>;
-				};
-			};
-		};
-
-		rng@1a500000 {
-			compatible = "qcom,prng";
-			reg = <0x1a500000 0x200>;
-			clocks = <&gcc PRNG_CLK>;
-			clock-names = "core";
-		};
-
-		qcom_pinmux: pinmux@800000 {
-			compatible = "qcom,ipq8064-pinctrl";
-			reg = <0x800000 0x4000>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-
-			pcie0_pins: pcie0_pinmux {
-				mux {
-					pins = "gpio3";
-					function = "pcie1_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			pcie1_pins: pcie1_pinmux {
-				mux {
-					pins = "gpio48";
-					function = "pcie2_rst";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			pcie2_pins: pcie2_pinmux {
-				mux {
-					pins = "gpio63";
-					function = "pcie3_rst";
-					drive-strength = <12>;
-					bias-disable;
-					output-low;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			spi_pins: spi_pins {
-				mux {
-					pins = "gpio18", "gpio19", "gpio21";
-					function = "gsbi5";
-					drive-strength = <10>;
-					bias-none;
-				};
-			};
-
-			nand_pins: nand_pins {
-				disable {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				pullups {
-					pins = "gpio39";
-					function = "nand";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-bus-hold;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29",
-					       "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59",
-					       "gpio60", "gpio61", "gpio62";
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			leds_pins: leds_pins {
-				mux {
-					pins = "gpio7", "gpio8", "gpio9",
-						   "gpio26", "gpio53";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-down;
-					output-low;
-				};
-			};
-
-			buttons_pins: buttons_pins {
-				mux {
-					pins = "gpio54";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-		};
-
-		intc: interrupt-controller@2000000 {
-			compatible = "qcom,msm-qgic2";
-			interrupt-controller;
-			#interrupt-cells = <3>;
-			reg = <0x02000000 0x1000>,
-				  <0x02002000 0x1000>;
-		};
-
-		timer@200a000 {
-			compatible = "qcom,kpss-timer", "qcom,msm-timer";
-			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-					 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-					 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-					 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>,
-					 <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
-						 IRQ_TYPE_EDGE_RISING)>;
-			reg = <0x0200a000 0x100>;
-			clock-frequency = <25000000>,
-					  <32768>;
-			clocks = <&sleep_clk>;
-			clock-names = "sleep";
-			cpu-offset = <0x80000>;
-		};
-
-		acpu0_aux: clock-controller@2088000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
-			clock-output-names = "acpu0_aux";
-		};
-
-		acpu1_aux: clock-controller@2098000 {
-			compatible = "qcom,kpss-acc-v1";
-			reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
-			clock-output-names = "acpu1_aux";
-		};
-
-		l2cc: clock-controller@2011000 {
-			compatible = "qcom,kpss-gcc", "syscon";
-			reg = <0x2011000 0x1000>;
-			clock-output-names = "acpu_l2_aux";
-		};
-
-		kraitcc: clock-controller {
-			compatible = "qcom,krait-cc-v1";
-			#clock-cells = <1>;
-		};
-
-		saw0: regulator@2089000 {
-			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
-			reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw1: regulator@2099000 {
-			compatible = "qcom,saw2", "qcom,apq8064-saw2-v1.1-cpu", "syscon";
-			reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
-			regulator;
-		};
-
-		saw_l2: regulator@02012000 {
-			compatible = "qcom,saw2", "syscon";
-			reg = <0x02012000 0x1000>;
-			regulator;
-		};
-
-		sic_non_secure: sic-non-secure@12100000 {
-			compatible = "syscon";
-			reg = <0x12100000 0x10000>;
-		};
-
-		gsbi2: gsbi@12480000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <2>;
-			reg = <0x12480000 0x100>;
-			clocks = <&gcc GSBI2_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi2_serial: serial@12490000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x12490000 0x1000>,
-					  <0x12480000 0x1000>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@124a0000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x124a0000 0x1000>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI2_QUP_CLK>, <&gcc GSBI2_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-		};
-
-		gsbi4: gsbi@16300000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <4>;
-			reg = <0x16300000 0x100>;
-			clocks = <&gcc GSBI4_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi4_serial: serial@16340000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16340000 0x1000>,
-					  <0x16300000 0x1000>;
-				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@16380000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x16380000 0x1000>;
-				interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI4_QUP_CLK>, <&gcc GSBI4_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi5: gsbi@1a200000 {
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <5>;
-			reg = <0x1a200000 0x100>;
-			clocks = <&gcc GSBI5_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			status = "disabled";
-
-			syscon-tcsr = <&tcsr>;
-
-			gsbi5_serial: serial@1a240000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x1a240000 0x1000>,
-					  <0x1a200000 0x1000>;
-				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-
-			i2c@1a280000 {
-				compatible = "qcom,i2c-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-
-			spi@1a280000 {
-				compatible = "qcom,spi-qup-v1.1.1";
-				reg = <0x1a280000 0x1000>;
-				interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
-
-				clocks = <&gcc GSBI5_QUP_CLK>, <&gcc GSBI5_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-
-				#address-cells = <1>;
-				#size-cells = <0>;
-			};
-		};
-
-		gsbi7: gsbi@16600000 {
-			status = "disabled";
-			compatible = "qcom,gsbi-v1.0.0";
-			cell-index = <7>;
-			reg = <0x16600000 0x100>;
-			clocks = <&gcc GSBI7_H_CLK>;
-			clock-names = "iface";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			syscon-tcsr = <&tcsr>;
-
-			gsbi7_serial: serial@16640000 {
-				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
-				reg = <0x16640000 0x1000>,
-					  <0x16600000 0x1000>;
-				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
-				clock-names = "core", "iface";
-				status = "disabled";
-			};
-		};
-
-		sata_phy: sata-phy@1b400000 {
-			compatible = "qcom,ipq806x-sata-phy";
-			reg = <0x1b400000 0x200>;
-
-			clocks = <&gcc SATA_PHY_CFG_CLK>;
-			clock-names = "cfg";
-
-			#phy-cells = <0>;
-			status = "disabled";
-		};
-
-		sata: sata@29000000 {
-			compatible = "qcom,ipq806x-ahci", "generic-ahci";
-			reg = <0x29000000 0x180>;
-
-			ports-implemented = <0x1>;
-
-			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
-
-			clocks = <&gcc SFAB_SATA_S_H_CLK>,
-				 <&gcc SATA_H_CLK>,
-				 <&gcc SATA_A_CLK>,
-				 <&gcc SATA_RXOOB_CLK>,
-				 <&gcc SATA_PMALIVE_CLK>;
-			clock-names = "slave_face", "iface", "core",
-					"rxoob", "pmalive";
-
-			assigned-clocks = <&gcc SATA_RXOOB_CLK>, <&gcc SATA_PMALIVE_CLK>;
-			assigned-clock-rates = <100000000>, <100000000>;
-
-			phys = <&sata_phy>;
-			phy-names = "sata-phy";
-			status = "disabled";
-		};
-
-		qcom,ssbi@500000 {
-			compatible = "qcom,ssbi";
-			reg = <0x00500000 0x1000>;
-			qcom,controller-type = "pmic-arbiter";
-		};
-
-		gcc: clock-controller@900000 {
-			compatible = "qcom,gcc-ipq8064";
-			reg = <0x00900000 0x4000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-			#power-domain-cells = <1>;
-		};
-
-		tsens: thermal-sensor@900000 {
-			compatible = "qcom,ipq8064-tsens";
-			reg = <0x900000 0x3680>;
-			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
-			nvmem-cell-names = "calib", "calib_backup";
-			interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH>;
-			#thermal-sensor-cells = <1>;
-		};
-
-		tcsr: syscon@1a400000 {
-			compatible = "qcom,tcsr-ipq8064", "syscon";
-			reg = <0x1a400000 0x100>;
-		};
-
-		lcc: clock-controller@28000000 {
-			compatible = "qcom,lcc-ipq8064";
-			reg = <0x28000000 0x1000>;
-			#clock-cells = <1>;
-			#reset-cells = <1>;
-		};
-
-		sfpb_mutex_block: syscon@1200600 {
-			compatible = "syscon";
-			reg = <0x01200600 0x100>;
-		};
-
-		hs_phy_0: hs_phy_0 {
-			compatible = "qcom,dwc3-hs-usb-phy";
-			regmap = <&usb3_0>;
-			clocks = <&gcc USB30_0_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-		};
-
-		ss_phy_0: ss_phy_0 {
-			compatible = "qcom,dwc3-ss-usb-phy";
-			regmap = <&usb3_0>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-		};
-
-		usb3_0: usb3@110f8800 {
-			compatible = "qcom,dwc3", "syscon";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x110f8800 0x8000>;
-			clocks = <&gcc USB30_0_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_0_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_0: dwc3@11000000 {
-				compatible = "snps,dwc3";
-				reg = <0x11000000 0xcd00>;
-				interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_0>, <&ss_phy_0>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		hs_phy_1: hs_phy_1 {
-			compatible = "qcom,dwc3-hs-usb-phy";
-			regmap = <&usb3_1>;
-			clocks = <&gcc USB30_1_UTMI_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-		};
-
-		ss_phy_1: ss_phy_1 {
-			compatible = "qcom,dwc3-ss-usb-phy";
-			regmap = <&usb3_1>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "ref";
-			#phy-cells = <0>;
-		};
-
-		usb3_1: usb3@100f8800 {
-			compatible = "qcom,dwc3", "syscon";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0x100f8800 0x8000>;
-			clocks = <&gcc USB30_1_MASTER_CLK>;
-			clock-names = "core";
-
-			ranges;
-
-			resets = <&gcc USB30_1_MASTER_RESET>;
-			reset-names = "master";
-
-			status = "disabled";
-
-			dwc3_1: dwc3@10000000 {
-				compatible = "snps,dwc3";
-				reg = <0x10000000 0xcd00>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				phys = <&hs_phy_1>, <&ss_phy_1>;
-				phy-names = "usb2-phy", "usb3-phy";
-				dr_mode = "host";
-				snps,dis_u3_susphy_quirk;
-			};
-		};
-
-		pcie0: pci@1b500000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b500000 0x1000
-				   0x1b502000 0x80
-				   0x1b600000 0x100
-				   0x0ff00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <0>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0 0x0fe00000 0x0fe00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x08000000 0x08000000 0 0x07e00000>; /* non-prefetchable memory */
-
-			interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_A_CLK>,
-				 <&gcc PCIE_H_CLK>,
-				 <&gcc PCIE_PHY_CLK>,
-				 <&gcc PCIE_AUX_CLK>,
-				 <&gcc PCIE_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_ACLK_RESET>,
-				 <&gcc PCIE_HCLK_RESET>,
-				 <&gcc PCIE_POR_RESET>,
-				 <&gcc PCIE_PCI_RESET>,
-				 <&gcc PCIE_PHY_RESET>,
-				 <&gcc PCIE_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie0_pins>;
-			pinctrl-names = "default";
-
-			perst-gpios = <&qcom_pinmux 3 GPIO_ACTIVE_LOW>;
-
-			status = "disabled";
-		};
-
-		pcie1: pci@1b700000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b700000 0x1000
-				   0x1b702000 0x80
-				   0x1b800000 0x100
-				   0x31f00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <1>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0 0x31e00000 0x31e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x2e000000 0x2e000000 0 0x03e00000>; /* non-prefetchable memory */
-
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_1_A_CLK>,
-				 <&gcc PCIE_1_H_CLK>,
-				 <&gcc PCIE_1_PHY_CLK>,
-				 <&gcc PCIE_1_AUX_CLK>,
-				 <&gcc PCIE_1_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_1_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_1_ACLK_RESET>,
-				 <&gcc PCIE_1_HCLK_RESET>,
-				 <&gcc PCIE_1_POR_RESET>,
-				 <&gcc PCIE_1_PCI_RESET>,
-				 <&gcc PCIE_1_PHY_RESET>,
-				 <&gcc PCIE_1_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie1_pins>;
-			pinctrl-names = "default";
-
-			perst-gpios = <&qcom_pinmux 48 GPIO_ACTIVE_LOW>;
-
-			status = "disabled";
-		};
-
-		pcie2: pci@1b900000 {
-			compatible = "qcom,pcie-ipq8064";
-			reg = <0x1b900000 0x1000
-				   0x1b902000 0x80
-				   0x1ba00000 0x100
-				   0x35f00000 0x100000>;
-			reg-names = "dbi", "elbi", "parf", "config";
-			device_type = "pci";
-			linux,pci-domain = <2>;
-			bus-range = <0x00 0xff>;
-			num-lanes = <1>;
-			#address-cells = <3>;
-			#size-cells = <2>;
-
-			ranges = <0x81000000 0 0x35e00000 0x35e00000 0 0x00100000   /* downstream I/O */
-				  0x82000000 0 0x32000000 0x32000000 0 0x03e00000>; /* non-prefetchable memory */
-
-			interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "msi";
-			#interrupt-cells = <1>;
-			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
-
-			clocks = <&gcc PCIE_2_A_CLK>,
-				 <&gcc PCIE_2_H_CLK>,
-				 <&gcc PCIE_2_PHY_CLK>,
-				 <&gcc PCIE_2_AUX_CLK>,
-				 <&gcc PCIE_2_ALT_REF_CLK>;
-			clock-names = "core", "iface", "phy", "aux", "ref";
-
-			assigned-clocks = <&gcc PCIE_2_ALT_REF_CLK>;
-			assigned-clock-rates = <100000000>;
-
-			resets = <&gcc PCIE_2_ACLK_RESET>,
-				 <&gcc PCIE_2_HCLK_RESET>,
-				 <&gcc PCIE_2_POR_RESET>,
-				 <&gcc PCIE_2_PCI_RESET>,
-				 <&gcc PCIE_2_PHY_RESET>,
-				 <&gcc PCIE_2_EXT_RESET>;
-			reset-names = "axi", "ahb", "por", "pci", "phy", "ext";
-
-			pinctrl-0 = <&pcie2_pins>;
-			pinctrl-names = "default";
-
-			perst-gpios = <&qcom_pinmux 63 GPIO_ACTIVE_LOW>;
-
-			status = "disabled";
-		};
-
-		adm_dma: dma@18300000 {
-			compatible = "qcom,adm";
-			reg = <0x18300000 0x100000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-			#dma-cells = <1>;
-
-			clocks = <&gcc ADM0_CLK>, <&gcc ADM0_PBUS_CLK>;
-			clock-names = "core", "iface";
-
-			resets = <&gcc ADM0_RESET>,
-				 <&gcc ADM0_PBUS_RESET>,
-				 <&gcc ADM0_C0_RESET>,
-				 <&gcc ADM0_C1_RESET>,
-				 <&gcc ADM0_C2_RESET>;
-			reset-names = "clk", "pbus", "c0", "c1", "c2";
-			qcom,ee = <0>;
-
-			status = "disabled";
-		};
-
-		nand_controller: nand-controller@1ac00000 {
-			compatible = "qcom,ipq806x-nand";
-			reg = <0x1ac00000 0x800>;
-
-			clocks = <&gcc EBI2_CLK>,
-				 <&gcc EBI2_AON_CLK>;
-			clock-names = "core", "aon";
-
-			dmas = <&adm_dma 3>;
-			dma-names = "rxtx";
-			qcom,cmd-crci = <15>;
-			qcom,data-crci = <3>;
-
-			status = "disabled";
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		nss_common: syscon@03000000 {
-			compatible = "syscon";
-			reg = <0x03000000 0x0000FFFF>;
-		};
-
-		qsgmii_csr: syscon@1bb00000 {
-			compatible = "syscon";
-			reg = <0x1bb00000 0x000001FF>;
-		};
-
-		stmmac_axi_setup: stmmac-axi-config {
-			snps,wr_osr_lmt = <7>;
-			snps,rd_osr_lmt = <7>;
-			snps,blen = <16 0 0 0 0 0 0>;
-		};
-
-		mdio0: mdio@37000000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			compatible = "qcom,ipq8064-mdio", "syscon";
-			reg = <0x37000000 0x200000>;
-			resets = <&gcc GMAC_CORE1_RESET>;
-			reset-names = "stmmaceth";
-			clocks = <&gcc GMAC_CORE1_CLK>;
-			clock-names = "stmmaceth";
-
-			status = "disabled";
-		};
-
-		gmac0: ethernet@37000000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
-			reg = <0x37000000 0x200000>;
-			interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal = <1>;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE1_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE1_RESET>;
-			reset-names = "stmmaceth";
-
-			status = "disabled";
-		};
-
-		gmac1: ethernet@37200000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac";
-			reg = <0x37200000 0x200000>;
-			interrupts = <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal = <1>;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE2_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE2_RESET>;
-			reset-names = "stmmaceth";
-
-			status = "disabled";
-		};
-
-		gmac2: ethernet@37400000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37400000 0x200000>;
-			interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal = <1>;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE3_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE3_RESET>;
-			reset-names = "stmmaceth";
-
-			status = "disabled";
-		};
-
-		gmac3: ethernet@37600000 {
-			device_type = "network";
-			compatible = "qcom,ipq806x-gmac", "snps,dwmac";
-			reg = <0x37600000 0x200000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "macirq";
-
-			snps,axi-config = <&stmmac_axi_setup>;
-			snps,pbl = <32>;
-			snps,aal = <1>;
-
-			qcom,nss-common = <&nss_common>;
-			qcom,qsgmii-csr = <&qsgmii_csr>;
-
-			clocks = <&gcc GMAC_CORE4_CLK>;
-			clock-names = "stmmaceth";
-
-			resets = <&gcc GMAC_CORE4_RESET>;
-			reset-names = "stmmaceth";
-
-			status = "disabled";
-		};
-
-		/* Temporary fixed regulator */
-		vsdcc_fixed: vsdcc-regulator {
-			compatible = "regulator-fixed";
-			regulator-name = "SDCC Power";
-			regulator-min-microvolt = <3300000>;
-			regulator-max-microvolt = <3300000>;
-			regulator-always-on;
-		};
-
-		sdcc1bam: dma@12402000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12402000 0x8000>;
-			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC1_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		sdcc3bam: dma@12182000 {
-			compatible = "qcom,bam-v1.3.0";
-			reg = <0x12182000 0x8000>;
-			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&gcc SDC3_H_CLK>;
-			clock-names = "bam_clk";
-			#dma-cells = <1>;
-			qcom,ee = <0>;
-		};
-
-		amba: amba {
-			compatible = "arm,amba-bus";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			sdcc1: sdcc@12400000 {
-				status          = "disabled";
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				reg             = <0x12400000 0x2000>;
-				interrupts      = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				max-frequency   = <96000000>;
-				non-removable;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				vmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
-				dma-names = "tx", "rx";
-			};
-
-			sdcc3: sdcc@12180000 {
-				compatible      = "arm,pl18x", "arm,primecell";
-				arm,primecell-periphid = <0x00051180>;
-				status          = "disabled";
-				reg             = <0x12180000 0x2000>;
-				interrupts      = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "cmd_irq";
-				clocks          = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
-				clock-names     = "mclk", "apb_pclk";
-				bus-width       = <8>;
-				cap-sd-highspeed;
-				cap-mmc-highspeed;
-				max-frequency   = <192000000>;
-				#mmc-ddr-1_8v;
-				sd-uhs-sdr104;
-				sd-uhs-ddr50;
-				vqmmc-supply = <&vsdcc_fixed>;
-				dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
-				dma-names = "tx", "rx";
-			};
-		};
-	};
-
-	sfpb_mutex: sfpb-mutex {
-		compatible = "qcom,sfpb-mutex";
-		syscon = <&sfpb_mutex_block 4 4>;
-
-		#hwlock-cells = <1>;
-	};
-
-	smem {
-		compatible = "qcom,smem";
-		memory-region = <&smem>;
-		hwlocks = <&sfpb_mutex 3>;
-	};
-};
diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
index a478c3c764..fad39cf008 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8065.dtsi
@@ -31,6 +31,10 @@
 	phy-tx0-term-offset = <0>;
 };
 
+&sata {
+	ports-implemented = <0x1>;
+};
+
 &smb208_s2a {
 	regulator-min-microvolt = <775000>;
 	regulator-max-microvolt = <1275000>;