ipq806x: rework dts to use label

We should use label instead of redefine the node.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

1 files changed, 26 insertions, 26 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi
index 3e0d84d7eb..8b45f20d53 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -602,14 +602,14 @@
 			};
 		};
 
-		rpm@108000 {
+		rpm: rpm@108000 {
 			compatible = "qcom,rpm-ipq8064";
 			reg = <0x108000 0x1000>;
 			qcom,ipc = <&l2cc 0x8 2>;
 
 			interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+					 <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+					 <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "ack",
 					  "err",
 					  "wakeup";
@@ -716,7 +716,7 @@
 			leds_pins: leds_pins {
 				mux {
 					pins = "gpio7", "gpio8", "gpio9",
-					       "gpio26", "gpio53";
+						   "gpio26", "gpio53";
 					function = "gpio";
 					drive-strength = <2>;
 					bias-pull-down;
@@ -738,20 +738,20 @@
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
-			      <0x02002000 0x1000>;
+				  <0x02002000 0x1000>;
 		};
 
 		timer@200a000 {
 			compatible = "qcom,kpss-timer", "qcom,msm-timer";
 			interrupts = <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
+					 <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
+					 <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
+					 <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>,
-				     <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
+					 <GIC_PPI 5 (GIC_CPU_MASK_SIMPLE(2) |
 						 IRQ_TYPE_EDGE_RISING)>;
 			reg = <0x0200a000 0x100>;
 			clock-frequency = <25000000>,
@@ -823,7 +823,7 @@
 			uart2: serial@12490000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x12490000 0x1000>,
-				      <0x12480000 0x1000>;
+					  <0x12480000 0x1000>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI2_UART_CLK>, <&gcc GSBI2_H_CLK>;
 				clock-names = "core", "iface";
@@ -861,7 +861,7 @@
 			gsbi4_serial: serial@16340000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16340000 0x1000>,
-				      <0x16300000 0x1000>;
+					  <0x16300000 0x1000>;
 				interrupts = <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI4_UART_CLK>, <&gcc GSBI4_H_CLK>;
 				clock-names = "core", "iface";
@@ -898,7 +898,7 @@
 			uart5: serial@1a240000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x1a240000 0x1000>,
-				      <0x1a200000 0x1000>;
+					  <0x1a200000 0x1000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI5_UART_CLK>, <&gcc GSBI5_H_CLK>;
 				clock-names = "core", "iface";
@@ -947,7 +947,7 @@
 			gsbi7_serial: serial@16640000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16640000 0x1000>,
-				      <0x16600000 0x1000>;
+					  <0x16600000 0x1000>;
 				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&gcc GSBI7_UART_CLK>, <&gcc GSBI7_H_CLK>;
 				clock-names = "core", "iface";
@@ -1117,9 +1117,9 @@
 		pcie0: pci@1b500000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b500000 0x1000
-			       0x1b502000 0x80
-			       0x1b600000 0x100
-			       0x0ff00000 0x100000>;
+				   0x1b502000 0x80
+				   0x1b600000 0x100
+				   0x0ff00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <0>;
@@ -1171,9 +1171,9 @@
 		pcie1: pci@1b700000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b700000 0x1000
-			       0x1b702000 0x80
-			       0x1b800000 0x100
-			       0x31f00000 0x100000>;
+				   0x1b702000 0x80
+				   0x1b800000 0x100
+				   0x31f00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <1>;
@@ -1225,9 +1225,9 @@
 		pcie2: pci@1b900000 {
 			compatible = "qcom,pcie-ipq8064";
 			reg = <0x1b900000 0x1000
-			       0x1b902000 0x80
-			       0x1ba00000 0x100
-			       0x35f00000 0x100000>;
+				   0x1b902000 0x80
+				   0x1ba00000 0x100
+				   0x35f00000 0x100000>;
 			reg-names = "dbi", "elbi", "parf", "config";
 			device_type = "pci";
 			linux,pci-domain = <2>;
@@ -1432,7 +1432,7 @@
 			regulator-always-on;
 		};
 
-		sdcc1bam:dma@12402000 {
+		sdcc1bam: dma@12402000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12402000 0x8000>;
 			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -1440,9 +1440,9 @@
 			clock-names = "bam_clk";
 			#dma-cells = <1>;
 			qcom,ee = <0>;
-                };
+		};
 
-		sdcc3bam:dma@12182000 {
+		sdcc3bam: dma@12182000 {
 			compatible = "qcom,bam-v1.3.0";
 			reg = <0x12182000 0x8000>;
 			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -1452,7 +1452,7 @@
 			qcom,ee = <0>;
 		};
 
-		amba {
+		amba: amba {
 			compatible = "arm,amba-bus";
 			#address-cells = <1>;
 			#size-cells = <1>;