ipq806x: rework dts to use label

We should use label instead of redefine the node.

Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>

1 files changed, 272 insertions, 273 deletions

diff --git a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
index fd2f193b9e..75ca00024a 100644
--- a/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
+++ b/target/linux/ipq806x/files-5.4/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts
@@ -38,245 +38,6 @@
 	};
 
 	soc {
-		pinmux@800000 {
-			button_pins: button_pins {
-				mux {
-					pins = "gpio65", "gpio67", "gpio68";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			i2c4_pins: i2c4_pinmux {
-				mux {
-					pins = "gpio12", "gpio13";
-					function = "gsbi4";
-					drive-strength = <12>;
-					bias-disable;
-				};
-			};
-
-			led_pins: led_pins {
-				mux {
-					pins = "gpio6", "gpio53", "gpio54";
-					function = "gpio";
-					drive-strength = <2>;
-					bias-pull-up;
-				};
-			};
-
-			mdio0_pins: mdio0_pins {
-				mux {
-					pins = "gpio0", "gpio1";
-					function = "mdio";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-
-			nand_pins: nand_pins {
-				disable {
-					pins = "gpio34", "gpio35", "gpio36",
-					       "gpio37", "gpio38";
-					function = "nand";
-					drive-strength = <10>;
-					bias-disable;
-				};
-
-				pullups {
-					pins = "gpio39";
-					function = "nand";
-					drive-strength = <10>;
-					bias-pull-up;
-				};
-
-				hold {
-					pins = "gpio40", "gpio41", "gpio42",
-					       "gpio43", "gpio44", "gpio45",
-					       "gpio46", "gpio47";
-					function = "nand";
-					drive-strength = <10>;
-					bias-bus-hold;
-				};
-			};
-
-			rgmii2_pins: rgmii2_pins {
-				mux {
-					pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
-					       "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
-					function = "rgmii2";
-					drive-strength = <8>;
-					bias-disable;
-				};
-			};
-		};
-
-		gsbi@16300000 {
-			qcom,mode = <GSBI_PROT_I2C_UART>;
-			status = "okay";
-			serial@16340000 {
-				status = "okay";
-			};
-			/*
-			 * The i2c device on gsbi4 should not be enabled.
-			 * On ipq806x designs gsbi4 i2c is meant for exclusive
-			 * RPM usage. Turning this on in kernel manifests as
-			 * i2c failure for the RPM.
-			 */
-		};
-
-		sata-phy@1b400000 {
-			status = "okay";
-		};
-
-		sata@29000000 {
-			status = "okay";
-		};
-
-		usb3_0: usb3@110f8800 {
-			status = "okay";
-		};
-
-		usb3_1: usb3@100f8800 {
-			status = "okay";
-		};
-
-		pcie0: pci@1b500000 {
-			status = "okay";
-			force_gen1 = <1>;
-		};
-
-		pcie1: pci@1b700000 {
-			status = "okay";
-		};
-
-		pcie2: pci@1b900000 {
-			status = "okay";
-		};
-
-		nand-controller@1ac00000 {
-			status = "okay";
-
-			pinctrl-0 = <&nand_pins>;
-			pinctrl-names = "default";
-
-			nand@0 {
-				reg = <0>;
-				compatible = "qcom,nandcs";
-
-				nand-ecc-strength = <4>;
-				nand-bus-width = <8>;
-				nand-ecc-step-size = <512>;
-
-				partitions {
-					compatible = "fixed-partitions";
-					#address-cells = <1>;
-					#size-cells = <1>;
-
-					SBL1@0 {
-						label = "SBL1";
-						reg = <0x0000000 0x0040000>;
-						read-only;
-					};
-
-					MIBIB@40000 {
-						label = "MIBIB";
-						reg = <0x0040000 0x0140000>;
-						read-only;
-					};
-
-					SBL2@180000 {
-						label = "SBL2";
-						reg = <0x0180000 0x0140000>;
-						read-only;
-					};
-
-					SBL3@2c0000 {
-						label = "SBL3";
-						reg = <0x02c0000 0x0280000>;
-						read-only;
-					};
-
-					DDRCONFIG@540000 {
-						label = "DDRCONFIG";
-						reg = <0x0540000 0x0120000>;
-						read-only;
-					};
-
-					SSD@660000 {
-						label = "SSD";
-						reg = <0x0660000 0x0120000>;
-						read-only;
-					};
-
-					TZ@780000 {
-						label = "TZ";
-						reg = <0x0780000 0x0280000>;
-						read-only;
-					};
-
-					RPM@a00000 {
-						label = "RPM";
-						reg = <0x0a00000 0x0280000>;
-						read-only;
-					};
-
-					art: art@c80000 {
-						label = "art";
-						reg = <0x0c80000 0x0140000>;
-						read-only;
-					};
-
-					APPSBL@dc0000 {
-						label = "APPSBL";
-						reg = <0x0dc0000 0x0100000>;
-						read-only;
-					};
-
-					u_env@ec0000 {
-						label = "u_env";
-						reg = <0x0ec0000 0x0040000>;
-					};
-
-					s_env@f00000 {
-						label = "s_env";
-						reg = <0x0f00000 0x0040000>;
-					};
-
-					devinfo@f40000 {
-						label = "devinfo";
-						reg = <0x0f40000 0x0040000>;
-					};
-
-					linux@f80000 {
-						label = "kernel1";
-						reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs*/
-					};
-
-					rootfs@1280000 {
-						label = "rootfs1";
-						reg = <0x1280000 0x2500000>;
-					};
-
-					linux2@3780000 {
-						label = "kernel2";
-						reg = <0x3780000 0x2800000>;
-					};
-
-					rootfs2@3a80000 {
-						label = "rootfs2";
-						reg = <0x3a80000 0x2500000>;
-					};
-
-					syscfg@5f80000 {
-						label = "syscfg";
-						reg = <0x5f80000 0x2080000>;
-					};
-				};
-			};
-		};
-
 		mdio0: mdio@37000000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
@@ -308,40 +69,6 @@
 				reg = <4>;
 			};
 		};
-
-		gmac1: ethernet@37200000 {
-			status = "okay";
-			phy-mode = "rgmii";
-			qcom,id = <1>;
-			qcom,phy_mdio_addr = <4>;
-			qcom,poll_required = <1>;
-			qcom,rgmii_delay = <0>;
-			qcom,emulation = <0>;
-			pinctrl-0 = <&rgmii2_pins>;
-			pinctrl-names = "default";
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-		//lan
-		gmac2: ethernet@37400000 {
-			status = "okay";
-			phy-mode = "sgmii";
-			qcom,id = <2>;
-			qcom,phy_mdio_addr = <0>;	/* none */
-			qcom,poll_required = <0>;	/* no polling */
-			qcom,rgmii_delay = <0>;
-			qcom,emulation = <0>;
-			fixed-link {
-				speed = <1000>;
-				full-duplex;
-			};
-		};
-
-		adm_dma: dma@18300000 {
-			status = "okay";
-		};
 	};
 
 	keys {
@@ -391,3 +118,275 @@
 	};
 };
 
+&qcom_pinmux {
+	button_pins: button_pins {
+		mux {
+			pins = "gpio65", "gpio67", "gpio68";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	i2c4_pins: i2c4_pinmux {
+		mux {
+			pins = "gpio12", "gpio13";
+			function = "gsbi4";
+			drive-strength = <12>;
+			bias-disable;
+		};
+	};
+
+	led_pins: led_pins {
+		mux {
+			pins = "gpio6", "gpio53", "gpio54";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	mdio0_pins: mdio0_pins {
+		mux {
+			pins = "gpio0", "gpio1";
+			function = "mdio";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+
+	nand_pins: nand_pins {
+		disable {
+			pins = "gpio34", "gpio35", "gpio36",
+					"gpio37", "gpio38";
+			function = "nand";
+			drive-strength = <10>;
+			bias-disable;
+		};
+
+		pullups {
+			pins = "gpio39";
+			function = "nand";
+			drive-strength = <10>;
+			bias-pull-up;
+		};
+
+		hold {
+			pins = "gpio40", "gpio41", "gpio42",
+					"gpio43", "gpio44", "gpio45",
+					"gpio46", "gpio47";
+			function = "nand";
+			drive-strength = <10>;
+			bias-bus-hold;
+		};
+	};
+
+	rgmii2_pins: rgmii2_pins {
+		mux {
+			pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+					"gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
+			function = "rgmii2";
+			drive-strength = <8>;
+			bias-disable;
+		};
+	};
+};
+
+&gsbi4 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+	serial@16340000 {
+		status = "okay";
+	};
+	/*
+		* The i2c device on gsbi4 should not be enabled.
+		* On ipq806x designs gsbi4 i2c is meant for exclusive
+		* RPM usage. Turning this on in kernel manifests as
+		* i2c failure for the RPM.
+		*/
+};
+
+&sata_phy {
+	status = "okay";
+};
+
+&sata {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&pcie0 {
+	status = "okay";
+	force_gen1 = <1>;
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+&pcie2 {
+	status = "okay";
+};
+
+&nand_controller {
+	status = "okay";
+
+	pinctrl-0 = <&nand_pins>;
+	pinctrl-names = "default";
+
+	nand@0 {
+		reg = <0>;
+		compatible = "qcom,nandcs";
+
+		nand-ecc-strength = <4>;
+		nand-bus-width = <8>;
+		nand-ecc-step-size = <512>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			SBL1@0 {
+				label = "SBL1";
+				reg = <0x0000000 0x0040000>;
+				read-only;
+			};
+
+			MIBIB@40000 {
+				label = "MIBIB";
+				reg = <0x0040000 0x0140000>;
+				read-only;
+			};
+
+			SBL2@180000 {
+				label = "SBL2";
+				reg = <0x0180000 0x0140000>;
+				read-only;
+			};
+
+			SBL3@2c0000 {
+				label = "SBL3";
+				reg = <0x02c0000 0x0280000>;
+				read-only;
+			};
+
+			DDRCONFIG@540000 {
+				label = "DDRCONFIG";
+				reg = <0x0540000 0x0120000>;
+				read-only;
+			};
+
+			SSD@660000 {
+				label = "SSD";
+				reg = <0x0660000 0x0120000>;
+				read-only;
+			};
+
+			TZ@780000 {
+				label = "TZ";
+				reg = <0x0780000 0x0280000>;
+				read-only;
+			};
+
+			RPM@a00000 {
+				label = "RPM";
+				reg = <0x0a00000 0x0280000>;
+				read-only;
+			};
+
+			art: art@c80000 {
+				label = "art";
+				reg = <0x0c80000 0x0140000>;
+				read-only;
+			};
+
+			APPSBL@dc0000 {
+				label = "APPSBL";
+				reg = <0x0dc0000 0x0100000>;
+				read-only;
+			};
+
+			u_env@ec0000 {
+				label = "u_env";
+				reg = <0x0ec0000 0x0040000>;
+			};
+
+			s_env@f00000 {
+				label = "s_env";
+				reg = <0x0f00000 0x0040000>;
+			};
+
+			devinfo@f40000 {
+				label = "devinfo";
+				reg = <0x0f40000 0x0040000>;
+			};
+
+			linux@f80000 {
+				label = "kernel1";
+				reg = <0x0f80000 0x2800000>;  /* 3 MB spill to rootfs*/
+			};
+
+			rootfs@1280000 {
+				label = "rootfs1";
+				reg = <0x1280000 0x2500000>;
+			};
+
+			linux2@3780000 {
+				label = "kernel2";
+				reg = <0x3780000 0x2800000>;
+			};
+
+			rootfs2@3a80000 {
+				label = "rootfs2";
+				reg = <0x3a80000 0x2500000>;
+			};
+
+			syscfg@5f80000 {
+				label = "syscfg";
+				reg = <0x5f80000 0x2080000>;
+			};
+		};
+	};
+};
+
+&gmac1 {
+	status = "okay";
+	phy-mode = "rgmii";
+	qcom,id = <1>;
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,rgmii_delay = <0>;
+	qcom,emulation = <0>;
+	pinctrl-0 = <&rgmii2_pins>;
+	pinctrl-names = "default";
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+/* LAN */
+&gmac2 {
+	status = "okay";
+	phy-mode = "sgmii";
+	qcom,id = <2>;
+	qcom,phy_mdio_addr = <0>;	/* none */
+	qcom,poll_required = <0>;	/* no polling */
+	qcom,rgmii_delay = <0>;
+	qcom,emulation = <0>;
+	fixed-link {
+		speed = <1000>;
+		full-duplex;
+	};
+};
+
+&adm_dma {
+	status = "okay";
+};