aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/files-4.9/arch
diff options
context:
space:
mode:
authorDongming Han <handongming@gl-inet.com>2017-12-07 20:48:19 +0800
committerJohn Crispin <john@phrozen.org>2018-02-14 09:40:32 +0100
commit04d3308b6248ef21a6f0bc3378b342906c2d2865 (patch)
tree9180681b935ec6494df250411112327f07e9ef9f /target/linux/ipq806x/files-4.9/arch
parent88a41074e8e7012c2cb73b85263425c4c474beb1 (diff)
downloadupstream-04d3308b6248ef21a6f0bc3378b342906c2d2865.tar.gz
upstream-04d3308b6248ef21a6f0bc3378b342906c2d2865.tar.bz2
upstream-04d3308b6248ef21a6f0bc3378b342906c2d2865.zip
ipq806x: add support for GL.iNet GL-B1300
This patch adds support for GL.iNet GL-B1300 Specification: - SOC: IPQ4028 / QCA Dakota - RAM: 256 MiB - FLASH: 32 MiB - ETH: Qualcomm Atheros QCA8075 Gigabit Switch (2 x LAN, 1 x WAN) - USB: 1 x 3.0 (via Synopsys DesignWare DWC3 controller in the SoC) - WLAN1: Qualcomm Atheros QCA4028 2.4GHz 802.11bgn 2:2x2 - WLAN2: Qualcomm Atheros QCA4028 5GHz 802.11a/n/ac 2:2x2 - INPUT: one reset and one WPS button - LEDS: 3 leds: Power, WIFI(only for 2.4G currently), and one reserved - UART: 1 x UART on PCB (3.3V, TX, RX, GND) - 115200 8N1 Installation: Method 1: - use serial port to stop uboot - uboot command: run lf Method 2: - push down reset button and power on - wait until three leds constantly on then release - upgrade by uboot web at http://192.168.1.1 Note: - the sysupgrade image need to be renamed to lede-gl-b1300.bin in both method. - the sysupgrade image can be automatically downloaded if tftp server at 192.168.1.2 have that file. - the wifi led will be flashing when writing image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
Diffstat (limited to 'target/linux/ipq806x/files-4.9/arch')
-rw-r--r--target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts316
1 files changed, 316 insertions, 0 deletions
diff --git a/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts
new file mode 100644
index 0000000000..53824e3c8d
--- /dev/null
+++ b/target/linux/ipq806x/files-4.9/arch/arm/boot/dts/qcom-ipq4019-gl-b1300.dts
@@ -0,0 +1,316 @@
+/* Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ *
+ */
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+ model = "GL.iNet GL-B1300";
+ compatible = "glinet,gl-b1300", "qcom,ipq4019";
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x10000000>;
+ };
+
+ reserved-memory {
+ #address-cells = <0x1>;
+ #size-cells = <0x1>;
+ ranges;
+
+ apps_bl@87000000 {
+ reg = <0x87000000 0x400000>;
+ no-map;
+ };
+
+ sbl@87400000 {
+ reg = <0x87400000 0x100000>;
+ no-map;
+ };
+
+ cnss_debug@87500000 {
+ reg = <0x87500000 0x600000>;
+ no-map;
+ };
+
+ cpu_context_dump@87b00000 {
+ reg = <0x87b00000 0x080000>;
+ no-map;
+ };
+
+ tz_apps@87b80000 {
+ reg = <0x87b80000 0x280000>;
+ no-map;
+ };
+
+ smem@87e00000 {
+ reg = <0x87e00000 0x080000>;
+ no-map;
+ };
+
+ tz@87e80000 {
+ reg = <0x87e80000 0x180000>;
+ no-map;
+ };
+ };
+
+ soc {
+ tcsr@194b000 {
+ /* select hostmode */
+ compatible = "qcom,tcsr";
+ reg = <0x194b000 0x100>;
+ qcom,usb-hsphy-mode-select = <TCSR_USB_HSPHY_HOST_MODE>;
+ status = "ok";
+ };
+
+ ess_tcsr@1953000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1953000 0x1000>;
+ qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+ };
+
+ tcsr@1949000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1949000 0x100>;
+ qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+ };
+
+ tcsr@1957000 {
+ compatible = "qcom,tcsr";
+ reg = <0x1957000 0x100>;
+ qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+ };
+
+ pinctrl@1000000 {
+ serial_pins: serial_pinmux {
+ mux {
+ pins = "gpio60", "gpio61";
+ function = "blsp_uart0";
+ bias-disable;
+ };
+ };
+
+ spi_0_pins: spi_0_pinmux {
+ pinmux {
+ function = "blsp_spi0";
+ pins = "gpio55", "gpio56", "gpio57";
+ };
+ pinmux_cs {
+ function = "gpio";
+ pins = "gpio54";
+ };
+ pinconf {
+ pins = "gpio55", "gpio56", "gpio57";
+ drive-strength = <12>;
+ bias-disable;
+ };
+ pinconf_cs {
+ pins = "gpio54";
+ drive-strength = <2>;
+ bias-disable;
+ output-high;
+ };
+ };
+ };
+
+ blsp_dma: dma@7884000 {
+ status = "ok";
+ };
+
+ spi_0: spi@78b5000 {
+ pinctrl-0 = <&spi_0_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ cs-gpios = <&tlmm 54 0>;
+ };
+
+ serial@78af000 {
+ pinctrl-0 = <&serial_pins>;
+ pinctrl-names = "default";
+ status = "ok";
+ };
+
+ cryptobam: dma@8e04000 {
+ status = "ok";
+ };
+
+ crypto@8e3a000 {
+ status = "ok";
+ };
+
+ watchdog@b017000 {
+ status = "ok";
+ };
+
+ usb3_ss_phy: ssphy@9a000 {
+ status = "ok";
+ };
+
+ usb3_hs_phy: hsphy@a6000 {
+ status = "ok";
+ };
+
+ usb3: usb3@8af8800 {
+ status = "ok";
+ };
+
+ usb2_hs_phy: hsphy@a8000 {
+ status = "ok";
+ };
+
+ usb2: usb2@60f8800 {
+ status = "ok";
+ };
+
+ mdio@90000 {
+ status = "okay";
+ };
+
+ ess-switch@c000000 {
+ status = "okay";
+ };
+
+ ess-psgmii@98000 {
+ status = "okay";
+ };
+
+ edma@c080000 {
+ status = "okay";
+ };
+
+ wifi@a000000 {
+ status = "okay";
+ };
+
+ wifi@a800000 {
+ status = "okay";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ wps {
+ label = "wps";
+ gpios = <&tlmm 5 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+ reset {
+ label = "reset";
+ gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "gl-b1300:green:power";
+ gpios = <&tlmm 4 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ mesh {
+ label = "gl-b1300:green:mesh";
+ gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
+ };
+ wlan {
+ label = "gl-b1300:green:wlan";
+ gpios = <&tlmm 2 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&spi_0 {
+ mx25l25635f@0 {
+ compatible = "mx25l25635f", "jedec,spi-nor";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0>;
+ spi-max-frequency = <24000000>;
+
+ SBL1@0 {
+ label = "SBL1";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+ MIBIB@40000 {
+ label = "MIBIB";
+ reg = <0x40000 0x20000>;
+ read-only;
+ };
+ QSEE@60000 {
+ label = "QSEE";
+ reg = <0x60000 0x60000>;
+ read-only;
+ };
+ CDT@c0000 {
+ label = "CDT";
+ reg = <0xc0000 0x10000>;
+ read-only;
+ };
+ DDRPARAMS@d0000 {
+ label = "DDRPARAMS";
+ reg = <0xd0000 0x10000>;
+ read-only;
+ };
+ APPSBLENV@e0000 {
+ label = "APPSBLENV";
+ reg = <0xe0000 0x10000>;
+ read-only;
+ };
+ APPSBL@f0000 {
+ label = "APPSBL";
+ reg = <0xf0000 0x80000>;
+ read-only;
+ };
+ ART@170000 {
+ label = "ART";
+ reg = <0x170000 0x10000>;
+ read-only;
+ };
+ kernel@180000 {
+ label = "kernel";
+ reg = <0x180000 0x400000>;
+ };
+ rootfs@580000 {
+ label = "rootfs";
+ reg = <0x580000 0x1a80000>;
+ };
+ firmware@180000 {
+ label = "firmware";
+ reg = <0x180000 0x1e80000>;
+ };
+ };
+};
+
+&gmac0 {
+ qcom,phy_mdio_addr = <4>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <2 0x20>;
+};
+
+&gmac1 {
+ qcom,phy_mdio_addr = <3>;
+ qcom,poll_required = <1>;
+ qcom,forced_speed = <1000>;
+ qcom,forced_duplex = <1>;
+ vlan_tag = <1 0x10>;
+}; \ No newline at end of file