aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq806x/base-files
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2020-05-26 21:14:11 +0200
committerPetr Štetiar <ynezz@true.cz>2020-07-08 16:07:05 +0200
commit20c7abd4b7b9b4203b6858136b2c811b6dbd8dae (patch)
treed2c0ff5b78a1e762ae4c4d4df64b4d0878f05532 /target/linux/ipq806x/base-files
parentd64b20da21d796334840fe9614bb0cb572e22fda (diff)
downloadupstream-20c7abd4b7b9b4203b6858136b2c811b6dbd8dae.tar.gz
upstream-20c7abd4b7b9b4203b6858136b2c811b6dbd8dae.tar.bz2
upstream-20c7abd4b7b9b4203b6858136b2c811b6dbd8dae.zip
ipq806x: add support for Linksys EA7500 V1
This patch adds support for the Linksys EA7500 V1 router. Specification: - CPU: Qualcomm IPQ8064 - RAM: 256MB - Flash: NAND 128MB - WiFi: QCA9982 an+ac + QCA9983 bgn - Ethernet: 5 GBE Ports (WAN+ 4xLAN) (QCA8337) - USB: 1x USB 3.0 1x USB2.0 - Serial console: RJ-45 115200 8n1 (1V8 Voltage level) - 2 Buttons - 1 LED Known issues: - Some devices won't flash via web gui Installation: - Newer stock images doesn't allow to install custom firmware. - Please downgrade software to 1.1.2 version. Official firmware: https://downloads.linksys.com/downloads/firmware/FW_EA7500_1.1.2.172843_prod.gpg.img - Do it two times to downgrade all stored images. - Apply factory image via web-gui. Serial + TFTP method: - downgrade to 1.1.2 two times - connect ehternet and serial cable - set ip address of tftp server to 192.168.1.254 - put openwrt factory image to tftp folder and rename it to macan.bin - stop device while booting in u-boot - run command: "run flashimg" - run command: "setenv boot_part 1" - run command "saveenv" - reset Back to stock: - Please use old non-gpg image like this 1.1.2: https://downloads.linksys.com/downloads/firmware/FW_EA7500_1.1.2.172843_prod.img - ssh to router and copy image to tmp - use sysupgrade -n -F Tested by github users: @jack338c and @grzesiczek1 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [removed i2c4_pins, mdio0_pins, nand_pins, rgmii2_pins from DTSI] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'target/linux/ipq806x/base-files')
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/board.d/02_network7
-rw-r--r--target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata2
-rwxr-xr-xtarget/linux/ipq806x/base-files/etc/init.d/bootcount1
-rw-r--r--target/linux/ipq806x/base-files/lib/upgrade/platform.sh1
4 files changed, 11 insertions, 0 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index a3aa0fce70..65946d7ac5 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -27,6 +27,13 @@ qcom,ipq8064-ap161)
ucidef_add_switch "switch0" \
"0:lan" "1:lan" "2:lan" "3u@eth1" "6:wan" "4u@eth0"
;;
+linksys,ea7500-v1)
+ hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+ ucidef_add_switch "switch0" \
+ "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "6@eth1" "1:wan" "0@eth0"
+ ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+ ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+ ;;
linksys,ea8500)
hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
ucidef_add_switch "switch0" \
diff --git a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index bb505d642f..8b4942dee1 100644
--- a/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -13,6 +13,7 @@ case "$FIRMWARE" in
caldata_extract "ART" 0x1000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ART 0x1e)
;;
+ linksys,ea7500-v1 |\
linksys,ea8500)
caldata_extract "art" 0x1000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +1)
@@ -47,6 +48,7 @@ case "$FIRMWARE" in
caldata_extract "ART" 0x5000 0x2f20
ath10k_patch_mac $(mtd_get_mac_binary ART 0x18)
;;
+ linksys,ea7500-v1 |\
linksys,ea8500)
caldata_extract "art" 0x5000 0x2f20
ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) +2)
diff --git a/target/linux/ipq806x/base-files/etc/init.d/bootcount b/target/linux/ipq806x/base-files/etc/init.d/bootcount
index d0bf708e66..6e57c72e51 100755
--- a/target/linux/ipq806x/base-files/etc/init.d/bootcount
+++ b/target/linux/ipq806x/base-files/etc/init.d/bootcount
@@ -4,6 +4,7 @@ START=99
boot() {
case $(board_name) in
+ linksys,ea7500-v1 |\
linksys,ea8500)
mtd resetbc s_env || true
;;
diff --git a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
index 2be25f4a9c..560e64af3a 100644
--- a/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ipq806x/base-files/lib/upgrade/platform.sh
@@ -27,6 +27,7 @@ platform_do_upgrade() {
zyxel,nbg6817)
zyxel_do_upgrade "$1"
;;
+ linksys,ea7500-v1 |\
linksys,ea8500)
platform_do_upgrade_linksys "$1"
;;