diff options
author | Rodrigo Balerdi <lanchon@gmail.com> | 2022-04-07 03:18:59 -0300 |
---|---|---|
committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-05-17 23:15:44 +0200 |
commit | 3aeb6e975fb0f989401d2a6fb335dbcfd8c9806f (patch) | |
tree | 324f613d1307aa4be3a931ec7e258805663f63cf /target/linux/ipq806x/base-files/etc | |
parent | a11c3cde27252a3c6cb1496ec90ed0de6498b21f (diff) | |
download | upstream-3aeb6e975fb0f989401d2a6fb335dbcfd8c9806f.tar.gz upstream-3aeb6e975fb0f989401d2a6fb335dbcfd8c9806f.tar.bz2 upstream-3aeb6e975fb0f989401d2a6fb335dbcfd8c9806f.zip |
ipq806x: add support for Arris TR4400 v2 / RAC2V1A
Hardware specs:
SoC: Qualcomm IPQ8065 (dual core Cortex-A15)
RAM: 512 MB DDR3
Flash: 256 MB NAND, 32 MB NOR
WiFi: QCA9983 2.4 GHz, QCA9984 5 GHz
Switch: QCA8337
Ethernet: 5x 10/100/1000 Mbit/s
USB: 1x USB 3.0 Type-A
Buttons: WPS, Reset
Power: 12 VDC, 2.5 A
Ethernet ports:
1x WAN: connected to eth2
4x LAN: connected via the switch to eth0 and eth1
(eth0 is disabled in OEM firmware)
MAC addresses (OEM and OpenWrt):
fw_env @ 0x00 d4:ab:82:??:??:?a LAN (eth1)
fw_env @ 0x06 d4:ab:82:??:??:?b WAN (eth2)
fw_env @ 0x0c d4:ab:82:??:??:?c WLAN 2.4 GHz (ath1)
fw_env @ 0x12 d4:ab:82:??:??:?d WLAN 5 GHz (ath0)
fw_env @ 0x18 d4:ab:82:??:??:?e OEM usage unknown (eth0 in OpenWrt)
OID d4:ab:82 is registered to:
ARRIS Group, Inc., 6450 Sequence Drive, San Diego CA 92121, US
More info:
https://openwrt.org/inbox/toh/arris/tr4400_v2
IMPORTANT:
This port requires moving the 'fw_env' partition prior to first boot to
consolidate 70% of the usable space in flash into a contiguous partition.
'fw_env' contains factory-programmed MAC addresses, SSIDs, and passwords.
Its contents must be copied to 'rootfs_1' prior to booting via initramfs.
Note that the stock 'fw_env' partition will be wiped during sysupgrade.
A writable 'stock_fw_env' partition pointing to the old, stock location
is included in the port to help rolling back this change if desired.
Installation:
- Requires serial access and a TFTP server.
- Fully boot stock, press ENTER, type in:
mtd erase /dev/mtd21
dd if=/dev/mtd22 bs=128K count=1 | mtd write - /dev/mtd21
umount /config && ubidetach -m 23 && mtd erase /dev/mtd23
- Reboot and interrupt U-Boot by pressing a key, type in:
set mtdids 'nand0=nand0'
set mtdparts 'mtdparts=nand0:155M@0x6500000(mtd_ubi)'
set bootcmd 'ubi part mtd_ubi && ubi read 0x44000000 kernel && bootm'
env save
- Setup TFTP server serving initramfs image as 'recovery.bin', type in:
set ipaddr 192.168.1.1
set serverip 192.168.1.2
tftpboot recovery.bin && bootm
- Use sysupgrade to install squashfs image.
This port is based on work done by AmadeusGhost <amadeus@jmu.edu.cn>.
Signed-off-by: Rodrigo Balerdi <lanchon@gmail.com>
[add 5.15 changes for 0069-arm-boot-add-dts-files.patch]
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
(cherry picked from commit f8b0010dfb548469686049f85076fd6a3a6bca2e)
Diffstat (limited to 'target/linux/ipq806x/base-files/etc')
-rw-r--r-- | target/linux/ipq806x/base-files/etc/board.d/02_network | 5 |
1 files changed, 5 insertions, 0 deletions
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network index 4cb691f32e..dc9c11e4ba 100644 --- a/target/linux/ipq806x/base-files/etc/board.d/02_network +++ b/target/linux/ipq806x/base-files/etc/board.d/02_network @@ -11,6 +11,11 @@ board_config_update board=$(board_name) case "$board" in +arris,tr4400-v2) + ucidef_set_interfaces_lan_wan "eth1" "eth2" + ucidef_add_switch "switch0" \ + "1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "0u@eth0" + ;; askey,rt4230w-rev6 |\ asrock,g10 |\ nec,wg2600hp) |