ipq806x: Sort occurrences of boardame alphabetically

This restores the alphabetical sort that was present
before the renaming of boardname.

Signed-off-by: Luis Araneda <luaraneda@gmail.com>

2 files changed, 28 insertions, 29 deletions

diff --git a/target/linux/ipq806x/base-files/etc/board.d/01_leds b/target/linux/ipq806x/base-files/etc/board.d/01_leds
index f0b087f6f6..b04832ff79 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq806x/base-files/etc/board.d/01_leds
@@ -11,11 +11,10 @@ board=$(board_name)
 boardname="${board##*,}"
 
 case "$board" in
-tplink,c2600)
-	ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
-	ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
-	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
-	ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
+avm,fritzbox-4040)
+	ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
+	ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
+	ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
 	;;
 netgear,d7800 |\
 netgear,r7500 |\
@@ -26,15 +25,11 @@ netgear,r7800)
 	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:wan" "eth0"
 	ucidef_set_led_ide "esata" "eSATA" "${boardname}:white:esata"
 	;;
-avm,fritzbox-4040)
-	ucidef_set_led_wlan "wlan" "WLAN" "fritz4040:green:wlan" "phy0tpt" "phy1tpt"
-	ucidef_set_led_netdev "wan" "WAN" "fritz4040:green:wan" "eth1"
-	ucidef_set_led_switch "lan" "LAN" "fritz4040:green:lan" "switch0" "0x1e"
-	;;
-zyxel,nbg6817)
-	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
-	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
-	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+tplink,c2600)
+	ucidef_set_led_usbport "usb1" "USB 1" "${boardname}:white:usb_2" "usb1-port1" "usb2-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "${boardname}:white:usb_4" "usb3-port1" "usb4-port1"
+	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
+	ucidef_set_led_switch "lan" "lan" "${boardname}:white:lan" "switch0" "0x1e"
 	;;
 tplink,vr2600v)
 	ucidef_set_led_usbport "usb" "USB" "${boardname}:white:usb" "usb1-port1" "usb2-port1" "usb3-port1" "usb4-port1"
@@ -43,6 +38,11 @@ tplink,vr2600v)
 	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:white:wlan5g" "phy1tpt"
 	ucidef_set_led_switch "wan" "wan" "${boardname}:white:wan" "switch0" "0x20"
 	;;
+zyxel,nbg6817)
+	ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:amber:wifi2g" "phy1tpt"
+	ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:amber:wifi5g" "phy0tpt"
+	ucidef_set_led_netdev "wan" "WAN" "${boardname}:white:internet" "eth1"
+	;;
 *)
 	;;
 esac
diff --git a/target/linux/ipq806x/base-files/etc/board.d/02_network b/target/linux/ipq806x/base-files/etc/board.d/02_network
index 8854b9c67d..74a38eece6 100755
--- a/target/linux/ipq806x/base-files/etc/board.d/02_network
+++ b/target/linux/ipq806x/base-files/etc/board.d/02_network
@@ -12,6 +12,18 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
+avm,fritzbox-4040)
+	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+	ucidef_add_switch "switch0" \
+		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+	;;
+linksys,ea8500)
+	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+	ucidef_add_switch "switch0" \
+		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
+	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
+	;;
 netgear,d7800 |\
 netgear,r7500 |\
 netgear,r7500v2 |\
@@ -21,27 +33,14 @@ tplink,vr2600v)
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6@eth1" "5:wan" "0@eth0"
 	;;
-tplink,c2600)
-	ucidef_add_switch "switch0" \
-		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
-	;;
 qcom,ipq8064-db149)
 	ucidef_set_interface_lan "eth1 eth2 eth3"
 	ucidef_add_switch "switch0" \
 		"1:lan" "2:lan" "3:lan" "4:lan" "6u@eth1" "5:wan" "0u@eth0"
 	;;
-linksys,ea8500)
-
-	hw_mac_addr=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-	ucidef_add_switch "switch0" \
-		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
-	ucidef_set_interface_macaddr "lan" "$hw_mac_addr"
-	ucidef_set_interface_macaddr "wan" "$hw_mac_addr"
-	;;
-avm,fritzbox-4040)
-	ucidef_set_interfaces_lan_wan "eth0" "eth1"
+tplink,c2600)
 	ucidef_add_switch "switch0" \
-		"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
+		"1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "6@eth1" "5:wan" "0@eth0"
 	;;
 zyxel,nbg6817)
 	hw_mac_addr=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)