ipq40xx: add support for Extreme Networks WS-AP3915i

Hardware
--------
Qualcomm IPQ4029 WiSoC
2T2R 802.11 abgn
2T2R 802.11 nac
Macronix MX25L25635E SPI-NOR (32M)
512M DDR3 RAM
1x Gigabit LAN
1x Cisco RJ-45 Console port
Settings: 115200 8N1

Installation
------------

1. Attach to the Console port. Power up the device and press the s key
   to interrupt autoboot.

2. The default username / password to the bootloader is admin / new2day

3. Update the bootcommand to allow loading OpenWrt.

   $ setenv ramboot_openwrt "setenv serverip 192.168.1.66;
     setenv ipaddr 192.168.1.1; tftpboot 0x86000000 openwrt-3915.bin;
     bootm"
   $ setenv boot_openwrt "sf probe;
     sf read 0x88000000 0x280000 0xc00000; bootm 0x88000000"
   $ setenv bootcmd "run boot_openwrt"
   $ saveenv

4. Download the OpenWrt initramfs image. Serve it using a TFTP server as
   "openwrt-3915.bin" at 192.1681.66.

5. Download & boot the OpenWrt initramfs image on the access point.

   $ run ramboot_openwrt

6. Wait for OpenWrt to start.

7. Download and transfer the sysupgrade image to the device using e.g.
   SCP.

8. Install OpenWrt to the device using "sysupgrade"

   $ sysupgrade -n /path/to/openwrt.bin

Signed-off-by: David Bauer <mail@david-bauer.net>

5 files changed, 296 insertions, 0 deletions

diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index 5843987627..a468c62b3c 100644
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -28,6 +28,7 @@ ipq40xx_setup_interfaces()
 	dlink,dap-2610 |\
 	engenius,eap1300|\
 	engenius,emd1|\
+	extreme-networks,ws-ap3915i|\
 	meraki,mr33|\
 	meraki,mr74|\
 	mikrotik,lhgg-60ad|\
diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f1c424a28d..b488bf5ddb 100644
--- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -104,6 +104,10 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 2)
 		;;
+	extreme-networks,ws-ap3915i)
+		caldata_extract "ART" 0x1000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR0)
+		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
 		caldata_extract "ART" 0x1000 0x2f20
@@ -186,6 +190,10 @@ case "$FIRMWARE" in
 		caldata_extract "ART" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii u-boot-env ethaddr) 3)
 		;;
+	extreme-networks,ws-ap3915i)
+		caldata_extract "ART" 0x5000 0x2f20
+		ath10k_patch_mac $(mtd_get_mac_ascii CFG1 RADIOADDR1)
+		;;
 	linksys,ea8300 |\
 	linksys,mr8300)
 		caldata_extract "ART" 0x5000 0x2f20
diff --git a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
index ba1c196398..940af0528d 100644
--- a/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
+++ b/target/linux/ipq40xx/base-files/lib/preinit/05_set_iface_mac_ipq40xx.sh
@@ -15,6 +15,9 @@ preinit_set_mac_address() {
 		base_mac=$(cat /sys/class/net/eth0/address)
 		ip link set dev eth1 address $(macaddr_add "$base_mac" 1)
 		;;
+	extreme-networks,ws-ap3915i)
+		ip link set dev eth0 address $(mtd_get_mac_ascii CFG1 ethaddr)
+		;;
 	linksys,ea8300|\
 	linksys,mr8300)
 		base_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts
new file mode 100644
index 0000000000..c14023559b
--- /dev/null
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4029-ws-ap3915i.dts
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+
+#include "qcom-ipq4019.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/soc/qcom,tcsr.h>
+
+/ {
+	model = "Extreme Networks WS-AP3915i";
+	compatible = "extreme-networks,ws-ap3915i";
+
+	aliases {
+		led-boot = &led_system_green;
+		led-failsafe = &led_system_amber;
+		led-running = &led_system_green;
+		led-upgrade = &led_system_amber;
+		label-mac-device = &gmac0;
+	};
+
+	soc {
+		rng@22000 {
+			status = "okay";
+		};
+
+		mdio@90000 {
+			status = "okay";
+			pinctrl-0 = <&mdio_pins>;
+			pinctrl-names = "default";
+		};
+
+		ess-psgmii@98000 {
+			status = "okay";
+		};
+
+		tcsr@1949000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1949000 0x100>;
+			qcom,wifi_glb_cfg = <TCSR_WIFI_GLB_CFG>;
+		};
+
+		ess_tcsr@1953000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1953000 0x1000>;
+			qcom,ess-interface-select = <TCSR_ESS_PSGMII>;
+		};
+
+		tcsr@1957000 {
+			compatible = "qcom,tcsr";
+			reg = <0x1957000 0x100>;
+			qcom,wifi_noc_memtype_m0_m2 = <TCSR_WIFI_NOC_MEMTYPE_M0_M2>;
+		};
+
+		crypto@8e3a000 {
+			status = "okay";
+		};
+
+		watchdog@b017000 {
+			status = "okay";
+		};
+
+		ess-switch@c000000 {
+			status = "okay";
+			switch_lan_bmp = <0x20>;
+			switch_wan_bmp = <0x00>;
+		};
+
+		edma@c080000 {
+			status = "okay";
+			qcom,num_gmac = <1>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_system_green: system_green {
+			label = "green:system";
+			gpios = <&tlmm 49 GPIO_ACTIVE_LOW>;
+		};
+
+		led_system_amber: system_amber {
+			label = "amber:system";
+			gpios = <&tlmm 50 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wlan24_green: wlan24_green {
+			label = "green:wlan24";
+			gpios = <&tlmm 23 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy0tpt";
+		};
+
+		led_wlan24_amber: wlan24_amber {
+			label = "amber:wlan24";
+			gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+		};
+
+		led_wlan5_green: wlan5_green {
+			label = "green:wlan5";
+			gpios = <&tlmm 22 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "phy1tpt";
+		};
+
+		led_wlan5_amber: wlan5_amber {
+			label = "amber:wlan5";
+			gpios = <&tlmm 26 GPIO_ACTIVE_LOW>;
+		};
+
+		iot {
+			label = "blue:iot";
+			gpios = <&tlmm 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+
+		reset {
+			label = "reset";
+			gpios = <&tlmm 18 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_RESTART >;
+		};
+	};
+};
+
+&blsp_dma {
+	status = "okay";
+};
+
+&blsp1_uart1 {
+	pinctrl-0 = <&serial_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&cryptobam {
+	status = "okay";
+};
+
+&qpic_bam {
+	status = "okay";
+};
+
+&tlmm {
+	mdio_pins: mdio_pinmux {
+		mux_1 {
+			pins = "gpio6";
+			function = "mdio";
+			bias-pull-up;
+		};
+		mux_2 {
+			pins = "gpio7";
+			function = "mdc";
+			bias-pull-up;
+		};
+	};
+
+	spi_0_pins: spi_0_pinmux {
+		pin {
+			function = "blsp_spi0";
+			pins = "gpio13", "gpio14", "gpio15";
+			drive-strength = <12>;
+			bias-disable;
+		};
+		pin_cs {
+			function = "gpio";
+			pins = "gpio12";
+			drive-strength = <2>;
+			bias-disable;
+			output-high;
+		};
+	};
+
+	serial_pins: serial_0_pinmux {
+		mux {
+			pins = "gpio16", "gpio17";
+			function = "blsp_uart0";
+			bias-disable;
+		};
+	};
+};
+
+&wifi0 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i";
+};
+
+&wifi1 {
+	status = "okay";
+	qcom,ath10k-calibration-variant = "Extreme-Networks-WS-AP3915i";
+};
+
+&blsp1_spi1 {
+	pinctrl-0 = <&spi_0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+	cs-gpios = <&tlmm 12 GPIO_ACTIVE_HIGH>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <24000000>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Layout for 0x0 - 0xe0000 unknown */
+
+			partition@e0000 {
+				label = "CFG1";
+				reg = <0xe0000 0x10000>;
+				read-only;
+			};
+
+			partition@f0000 {
+				label = "BootBAK";
+				reg = <0xf0000 0x70000>;
+				read-only;
+			};
+
+			partition@160000 {
+				label = "WINGCFG1";
+				reg = <0x160000 0x10000>;
+				read-only;
+			};
+
+			partition@170000 {
+				label = "ART";
+				reg = <0x170000 0x10000>;
+				read-only;
+			};
+
+			partition@180000 {
+				label = "BootPRI";
+				reg = <0x180000 0x70000>;
+				read-only;
+			};
+
+			partition@1f0000 {
+				label = "WINGCFG2";
+				reg = <0x1f0000 0x10000>;
+				read-only;
+			};
+
+			partition@200000 {
+				label = "FS";
+				reg = <0x200000 0x80000>;
+				read-only;
+			};
+
+			partition@280000 {
+				label = "firmware";
+				reg = <0x280000 0x1d60000>;
+			};
+
+			partition@1fe0000 {
+				label = "CFG2";
+				reg = <0x1fe0000 0x10000>;
+				read-only;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	qcom,phy_mdio_addr = <4>;
+	qcom,poll_required = <1>;
+	qcom,forced_speed = <1000>;
+	qcom,forced_duplex = <1>;
+	vlan_tag = <1 0x20>;
+};
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index 6daebd5ed0..e8f8fa27b9 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -519,6 +519,18 @@ define Device/engenius_ens620ext
 endef
 TARGET_DEVICES += engenius_ens620ext
 
+define Device/extreme-networks_ws-ap3915i
+	$(call Device/FitImage)
+	DEVICE_VENDOR := Extreme Networks
+	DEVICE_MODEL := WS-AP3915i
+	IMAGE_SIZE := 30080k
+	SOC := qcom-ipq4029
+	BLOCKSIZE := 128k
+	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
+	DEVICE_PACKAGES := ipq-wifi-extreme-networks_ws-ap3915i
+endef
+TARGET_DEVICES += extreme-networks_ws-ap3915i
+
 define Device/ezviz_cs-w3-wd1200g-eup
 	$(call Device/FitImage)
 	DEVICE_VENDOR := EZVIZ