aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx
diff options
context:
space:
mode:
authorSungbo Eo <mans0n@gorani.run>2019-12-21 12:43:40 +0900
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2019-12-22 01:04:51 +0100
commit80839694056d7eedb1fac1c4b61847c4a4f94d6a (patch)
tree3cd047de9f36694013aa4ad286e09feaf5ab1a6b /target/linux/ipq40xx
parent9b02d32e34df2bb8821ec6f08f525bee22d0d1ba (diff)
downloadupstream-80839694056d7eedb1fac1c4b61847c4a4f94d6a.tar.gz
upstream-80839694056d7eedb1fac1c4b61847c4a4f94d6a.tar.bz2
upstream-80839694056d7eedb1fac1c4b61847c4a4f94d6a.zip
ipq40xx: improve ASUS RT-AC58U support
This patch does the following: - move WiFi LED setup to DTS - fix LAN/WAN MAC addresses and add label MAC address - wan5G -> wlan5G, power -> led_power - increase flash SPI frequency to 30MHz MAC addresses are stored in Factory partition at: 0x1006: WiFi 2.4GHz, WAN (label_mac) 0x5006: WiFi 5GHz, LAN (label_mac +4) By improving flash speed, `time dd if=/dev/mtdblock8 of=/dev/null bs=2k` is reduced from 7m 10.26s to 5m 9.52s. Using higher frequencies did not improve speed further. Signed-off-by: Sungbo Eo <mans0n@gorani.run>
Diffstat (limited to 'target/linux/ipq40xx')
-rwxr-xr-xtarget/linux/ipq40xx/base-files/etc/board.d/01_leds2
-rwxr-xr-xtarget/linux/ipq40xx/base-files/etc/board.d/02_network8
-rw-r--r--target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts18
-rw-r--r--target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts18
4 files changed, 26 insertions, 20 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
index 9cd51e5de0..0326bab382 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds
@@ -15,8 +15,6 @@ alfa-network,ap120c-ac)
ucidef_set_led_netdev "wan" "WAN" "${boardname}:amber:wan" "eth1"
;;
asus,rt-ac58u)
- ucidef_set_led_wlan "wlan2g" "WLAN2G" "${boardname}:blue:wlan2G" "phy0tpt"
- ucidef_set_led_wlan "wlan5g" "WLAN5G" "${boardname}:blue:wlan5G" "phy1tpt"
ucidef_set_led_netdev "wan" "WAN" "${boardname}:blue:wan" "eth1"
ucidef_set_led_switch "lan" "LAN" "${boardname}:blue:lan" "switch0" "0x1e"
;;
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network
index dcf684f511..ae8cb2efe7 100755
--- a/target/linux/ipq40xx/base-files/etc/board.d/02_network
+++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network
@@ -79,12 +79,16 @@ ipq40xx_setup_interfaces()
ipq40xx_setup_macs()
{
local board="$1"
+ local lan_mac=""
+ local wan_mac=""
+ local label_mac=""
case "$board" in
asus,rt-ac58u)
CI_UBIPART=UBI_DEV
- wan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
- lan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+ wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
+ lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
+ label_mac=$wan_mac
;;
cilab,meshpoint-one)
label_mac=$(mtd_get_mac_binary "ART" 0x1006)
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index 0f6cd689cf..4e5559386e 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -15,10 +15,10 @@
};
aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
chosen {
@@ -137,7 +137,7 @@
leds {
compatible = "gpio-leds";
- power: status {
+ led_power: status {
label = "rt-ac58u:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
@@ -150,11 +150,13 @@
wlan2G {
label = "rt-ac58u:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
};
- wan5G {
+ wlan5G {
label = "rt-ac58u:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
};
usb {
@@ -224,7 +226,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
- spi-max-frequency = <24000000>;
+ spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
@@ -280,7 +282,7 @@
#size-cells = <0>;
compatible = "spinand,mt29f";
reg = <1>;
- spi-max-frequency = <24000000>;
+ spi-max-frequency = <30000000>;
/*
* U-boot looks for "spinand,mt29f" node,
diff --git a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index 26c086ed25..a569a158fd 100644
--- a/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-4.19/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -15,10 +15,10 @@
};
aliases {
- led-boot = &power;
- led-failsafe = &power;
- led-running = &power;
- led-upgrade = &power;
+ led-boot = &led_power;
+ led-failsafe = &led_power;
+ led-running = &led_power;
+ led-upgrade = &led_power;
};
chosen {
@@ -131,7 +131,7 @@
leds {
compatible = "gpio-leds";
- power: status {
+ led_power: status {
label = "rt-ac58u:blue:status";
gpios = <&tlmm 3 GPIO_ACTIVE_HIGH>;
};
@@ -144,11 +144,13 @@
wlan2G {
label = "rt-ac58u:blue:wlan2G";
gpios = <&tlmm 58 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy0tpt";
};
- wan5G {
+ wlan5G {
label = "rt-ac58u:blue:wlan5G";
gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "phy1tpt";
};
usb {
@@ -216,7 +218,7 @@
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l1606e", "n25q128a11";
- spi-max-frequency = <24000000>;
+ spi-max-frequency = <30000000>;
partitions {
compatible = "fixed-partitions";
@@ -270,7 +272,7 @@
spi-nand@1 {
compatible = "spi-nand";
reg = <1>;
- spi-max-frequency = <24000000>;
+ spi-max-frequency = <30000000>;
/*
* U-boot looks for "spinand,mt29f" node,