ipq40xx: use patches that were sent upstream

Signed-off-by: John Crispin <john@phrozen.org>

27 files changed, 510 insertions, 296 deletions

diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
index baa8b570b9..4c1e1de24c 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-a42.dts
@@ -164,7 +164,7 @@
 	status = "okay";
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
index 1a0abb8960..36555f0003 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-ex61x0v2.dtsi
@@ -193,7 +193,7 @@
 	};
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts
index af5c7435fb..4423e83ba2 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-fritz4040.dts
@@ -201,7 +201,7 @@
 	status = "okay";
 };
 
-&spi_0 { /* BLSP1 QUP1 */
+&blsp1_spi1 { /* BLSP1 QUP1 */
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
index f94ae8f7f4..78b38a1411 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-jalapeno.dts
@@ -144,7 +144,7 @@
 	status = "okay";
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	cs-gpios = <&tlmm 54 GPIO_ACTIVE_HIGH>, <&tlmm 59 GPIO_ACTIVE_HIGH>;
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
index 15d68f3cbb..d94c8d3488 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-nbg6617.dts
@@ -193,7 +193,7 @@
 	};
 };
 
-&spi_0 { /* BLSP1 QUP1 */
+&blsp1_spi1 { /* BLSP1 QUP1 */
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
index 5d7bae9bc6..0b3e4f0e65 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-rt-ac58u.dts
@@ -195,7 +195,7 @@
 	};
 };
 
-&spi_0 { /* BLSP1 QUP1 */
+&blsp1_spi1 { /* BLSP1 QUP1 */
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
index 1f6f5b1d95..996d64c12f 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4018-wre6606.dts
@@ -157,7 +157,7 @@
 	};
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts
index 8717d9d771..7201481fbc 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-a62.dts
@@ -174,7 +174,7 @@
 	status = "okay";
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
index eeadc075dd..157037f558 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4019-ap.dk04.1.dtsi
@@ -98,7 +98,7 @@
 			status = "okay";
 		};
 
-		spi_0: spi@78b5000 {
+		spi0: spi@78b5000 {
 			pinctrl-0 = <&spi_0_pins>;
 			pinctrl-names = "default";
 			status = "okay";
@@ -113,7 +113,7 @@
 			};
 		};
 
-		i2c_0: i2c@78b7000 { /* BLSP1 QUP2 */
+		i2c0: i2c@78b7000 { /* BLSP1 QUP2 */
 			pinctrl-0 = <&i2c_0_pins>;
 			pinctrl-names = "default";
 
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
index 8f7c6c80bb..57c5aaa564 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4028-wpj428.dts
@@ -162,7 +162,7 @@
 	status = "okay";
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
index d7cc5580b8..53cb1b727f 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-gl-b1300.dts
@@ -148,7 +148,7 @@
 	status = "okay";
 };
 
-&spi_0 {
+&blsp1_spi1 {
 	pinctrl-0 = <&spi_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
index b1cd328411..a91634e62a 100644
--- a/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
+++ b/target/linux/ipq40xx/files-4.14/arch/arm/boot/dts/qcom-ipq4029-mr33.dts
@@ -143,7 +143,7 @@
 	vlan_tag = <0 0x20>;
 };
 
-&i2c_0 {
+&blsp1_i2c3{
 	pinctrl-0 = <&i2c_0_pins>;
 	pinctrl-names = "default";
 	status = "okay";
@@ -155,7 +155,7 @@
 	};
 };
 
-&i2c_1 {
+&blsp1_i2c4{
 	pinctrl-0 = <&i2c_1_pins>;
 	pinctrl-names = "default";
 	status = "okay";
diff --git a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch
index b7e375dfb2..1e1a83220e 100644
--- a/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch
+++ b/target/linux/ipq40xx/patches-4.14/070-qcom-spm-fix-probe-order.patch
@@ -1,10 +1,22 @@
-Check for SCM availability before attempting to use SPM
+From 341844c7e06afccd64261719fa388339a589b0a4 Mon Sep 17 00:00:00 2001
+From: Felix Fietkau <nbd@nbd.name>
+Date: Sun, 22 Jul 2018 12:53:04 +0200
+Subject: [PATCH] soc: qcom: spm: add SCM probe dependency
+
+Check for SCM availability before attempting to use SPM. SPM probe will
+fail otherwise.
 
 Signed-off-by: Felix Fietkau <nbd@nbd.name>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ drivers/soc/qcom/spm.c | 3 +++
+ 1 file changed, 3 insertions(+)
 
+diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
+index f9d7a85b2822..53807e839664 100644
 --- a/drivers/soc/qcom/spm.c
 +++ b/drivers/soc/qcom/spm.c
-@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(stru
+@@ -219,6 +219,9 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
  	cpumask_t mask;
  	bool use_scm_power_down = false;
  
@@ -14,3 +26,6 @@ Signed-off-by: Felix Fietkau <nbd@nbd.name>
  	for (i = 0; ; i++) {
  		state_node = of_parse_phandle(cpu_node, "cpu-idle-states", i);
  		if (!state_node)
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch b/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
index ed44359e5f..f79e99f66f 100644
--- a/target/linux/ipq40xx/patches-4.14/305-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
+++ b/target/linux/ipq40xx/patches-4.14/071-qcom-ipq4019-use-v2-of-the-kpss-bringup-mechanism.patch
@@ -1,23 +1,23 @@
-From 6a6c067b7ce2b3de4efbafddc134afbea3ddc1a3 Mon Sep 17 00:00:00 2001
+From 364123029d8d547336323fbd3d659ecd0bba913f Mon Sep 17 00:00:00 2001
 From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Fri, 8 Apr 2016 15:26:10 -0500
-Subject: [PATCH] qcom: ipq4019: use v2 of the kpss bringup mechanism
+Date: Mon, 23 Jul 2018 08:41:02 +0200
+Subject: [PATCH 5/8] qcom: ipq4019: use v2 of the kpss bringup mechanism
 
 v1 was the incorrect choice here and sometimes the board
 would not come up properly.
 
 Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
 ---
-Changes:
-	- moved L2-Cache to be a subnode of cpu0
----
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 32 ++++++++++++++++++++++++--------
- 1 file changed, 24 insertions(+), 8 deletions(-)
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 25 +++++++++++++++++--------
+ 1 file changed, 17 insertions(+), 8 deletions(-)
 
+diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+index 93647db5d90b..06434fd02d40 100644
 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -36,19 +36,27 @@
+@@ -52,7 +52,8 @@
  		cpu@0 {
  			device_type = "cpu";
  			compatible = "arm,cortex-a7";
@@ -27,17 +27,7 @@ Changes:
  			qcom,acc = <&acc0>;
  			qcom,saw = <&saw0>;
  			reg = <0x0>;
- 			clocks = <&gcc GCC_APPS_CLK_SRC>;
- 			clock-frequency = <0>;
- 			operating-points-v2 = <&cpu0_opp_table>;
-+
-+			L2: l2-cache {
-+				compatible = "qcom,arch-cache";
-+				cache-level = <2>;
-+				qcom,saw = <&saw_l2>;
-+			};
- 		};
- 
+@@ -71,7 +72,8 @@
  		cpu@1 {
  			device_type = "cpu";
  			compatible = "arm,cortex-a7";
@@ -47,7 +37,7 @@ Changes:
  			qcom,acc = <&acc1>;
  			qcom,saw = <&saw1>;
  			reg = <0x1>;
-@@ -60,7 +68,8 @@
+@@ -82,7 +84,8 @@
  		cpu@2 {
  			device_type = "cpu";
  			compatible = "arm,cortex-a7";
@@ -57,7 +47,7 @@ Changes:
  			qcom,acc = <&acc2>;
  			qcom,saw = <&saw2>;
  			reg = <0x2>;
-@@ -72,7 +81,8 @@
+@@ -93,13 +96,19 @@
  		cpu@3 {
  			device_type = "cpu";
  			compatible = "arm,cortex-a7";
@@ -67,43 +57,44 @@ Changes:
  			qcom,acc = <&acc3>;
  			qcom,saw = <&saw3>;
  			reg = <0x3>;
-@@ -265,22 +275,22 @@
+ 			clocks = <&gcc GCC_APPS_CLK_SRC>;
+ 			clock-frequency = <0>;
+ 		};
++
++		L2: l2-cache {
++			compatible = "cache";
++			cache-level = <2>;
++		};
+ 	};
+ 
+ 	pmu {
+@@ -268,22 +277,22 @@
  		};
  
                  acc0: clock-controller@b088000 {
 -                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
++			compatible = "qcom,kpss-acc-v2";
                          reg = <0x0b088000 0x1000>, <0xb008000 0x1000>;
                  };
  
                  acc1: clock-controller@b098000 {
 -                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
++			compatible = "qcom,kpss-acc-v2";
                          reg = <0x0b098000 0x1000>, <0xb008000 0x1000>;
                  };
  
                  acc2: clock-controller@b0a8000 {
 -                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
++			compatible = "qcom,kpss-acc-v2";
                          reg = <0x0b0a8000 0x1000>, <0xb008000 0x1000>;
                  };
  
                  acc3: clock-controller@b0b8000 {
 -                        compatible = "qcom,kpss-acc-v1";
-+                        compatible = "qcom,kpss-acc-v2";
++			compatible = "qcom,kpss-acc-v2";
                          reg = <0x0b0b8000 0x1000>, <0xb008000 0x1000>;
                  };
  
-@@ -308,6 +318,12 @@
-                         regulator;
-                 };
- 
-+		saw_l2: regulator@b012000 {
-+			compatible = "qcom,saw2";
-+			reg = <0xb012000 0x1000>;
-+			regulator;
-+		};
-+
- 		serial@78af000 {
- 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
- 			reg = <0x78af000 0x200>;
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch b/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch
index 03e9021a42..5596e30852 100644
--- a/target/linux/ipq40xx/patches-4.14/017-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch
+++ b/target/linux/ipq40xx/patches-4.14/072-qcom-ipq4019-add-cpu-operating-points-for-cpufreq-su.patch
@@ -1,19 +1,22 @@
-From 18c3b42575a154343831aec0637aab00e19440e1 Mon Sep 17 00:00:00 2001
+From 544af73985cd14b450bb8e8a6c22b89a555ac729 Mon Sep 17 00:00:00 2001
 From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 17 Mar 2016 15:01:09 -0500
-Subject: [PATCH 17/69] qcom: ipq4019: add cpu operating points for cpufreq
+Date: Mon, 23 Jul 2018 09:10:35 +0200
+Subject: [PATCH 6/8] qcom: ipq4019: add cpu operating points for cpufreq
  support
 
 This adds some operating points for cpu frequeny scaling
 
 Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
+Signed-off-by: John Crispin <john@phrozen.org>
 ---
  arch/arm/boot/dts/qcom-ipq4019.dtsi | 34 ++++++++++++++++++++++++++--------
  1 file changed, 26 insertions(+), 8 deletions(-)
 
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -40,14 +40,7 @@
+Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi
+===================================================================
+--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -41,14 +41,7 @@
  			reg = <0x0>;
  			clocks = <&gcc GCC_APPS_CLK_SRC>;
  			clock-frequency = <0>;
@@ -29,7 +32,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
  		};
  
  		cpu@1 {
-@@ -59,6 +52,7 @@
+@@ -61,6 +54,7 @@
  			reg = <0x1>;
  			clocks = <&gcc GCC_APPS_CLK_SRC>;
  			clock-frequency = <0>;
@@ -37,7 +40,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
  		};
  
  		cpu@2 {
-@@ -70,6 +64,7 @@
+@@ -73,6 +67,7 @@
  			reg = <0x2>;
  			clocks = <&gcc GCC_APPS_CLK_SRC>;
  			clock-frequency = <0>;
@@ -45,7 +48,7 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
  		};
  
  		cpu@3 {
-@@ -81,6 +76,29 @@
+@@ -85,6 +80,29 @@
  			reg = <0x3>;
  			clocks = <&gcc GCC_APPS_CLK_SRC>;
  			clock-frequency = <0>;
@@ -73,5 +76,5 @@ Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
 +			opp-hz = /bits/ 64 <716000000>;
 +			clock-latency-ns = <256000>;
  		};
- 	};
  
+ 		L2: l2-cache {
diff --git a/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch b/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch
new file mode 100644
index 0000000000..e92ead5ee2
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.14/073-qcom-ipq4019-fix-cpu0-s-qcom-saw2-reg-value.patch
@@ -0,0 +1,38 @@
+From d60e006ec0e425877aacc61c7ece3da0434a8fce Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Mon, 23 Jul 2018 16:34:54 +0200
+Subject: [PATCH 7/8] qcom: ipq4019: fix cpu0's qcom,saw2 reg value
+
+while compiling an ipq4019 target, dtc will complain:
+regulator@b089000 unit address format error, expected "2089000"
+
+The saw0 regulator reg value seems to be
+copied and pasted from qcom-ipq8064.dtsi.
+
+This patch fixes the reg value to match that of the
+unit address which in turn silences the warning.
+(There is no driver for qcom,saw2 right now.
+So this went unnoticed)
+
+Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+index 98b9850ed2a0..3289b3a6c10e 100644
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -316,7 +316,7 @@
+ 
+                 saw0: regulator@b089000 {
+                         compatible = "qcom,saw2";
+-                        reg = <0x02089000 0x1000>, <0x0b009000 0x1000>;
++			reg = <0x0b089000 0x1000>, <0x0b009000 0x1000>;
+                         regulator;
+                 };
+ 
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/307-ARM-qcom-Add-IPQ4019-SoC-support.patch b/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
index 1dc1c97c72..cdecd14293 100644
--- a/target/linux/ipq40xx/patches-4.14/307-ARM-qcom-Add-IPQ4019-SoC-support.patch
+++ b/target/linux/ipq40xx/patches-4.14/074-ARM-qcom-Add-IPQ4019-SoC-support.patch
@@ -1,28 +1,33 @@
-From e7748d641ae37081e2034869491f1629461ae13c Mon Sep 17 00:00:00 2001
+From 89b43d59ec8c9cda588555eb1f2754dd19ef5144 Mon Sep 17 00:00:00 2001
 From: Christian Lamparter <chunkeey@gmail.com>
-Date: Sat, 19 Nov 2016 00:58:18 +0100
-Subject: [PATCH] ARM: qcom: Add IPQ4019 SoC support
+Date: Sun, 22 Jul 2018 12:07:57 +0200
+Subject: [PATCH 8/8] ARM: qcom: Add IPQ4019 SoC support
 
 Add support for the Qualcomm Atheros IPQ4019 SoC.
 
 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
 ---
  arch/arm/Makefile          | 1 +
  arch/arm/mach-qcom/Kconfig | 5 +++++
  2 files changed, 6 insertions(+)
 
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -149,6 +149,7 @@ textofs-$(CONFIG_SA1111) := 0x00208000
- endif
+Index: linux-4.14.54/arch/arm/Makefile
+===================================================================
+--- linux-4.14.54.orig/arch/arm/Makefile
++++ linux-4.14.54/arch/arm/Makefile
+@@ -150,6 +150,7 @@ endif
  textofs-$(CONFIG_ARCH_MSM8X60) := 0x00208000
  textofs-$(CONFIG_ARCH_MSM8960) := 0x00208000
-+textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
  textofs-$(CONFIG_ARCH_AXXIA) := 0x00308000
++textofs-$(CONFIG_ARCH_IPQ40XX) := 0x00208000
  
  # Machine directory name.  This list is sorted alphanumerically
---- a/arch/arm/mach-qcom/Kconfig
-+++ b/arch/arm/mach-qcom/Kconfig
+ # by CONFIG_* macro name.
+Index: linux-4.14.54/arch/arm/mach-qcom/Kconfig
+===================================================================
+--- linux-4.14.54.orig/arch/arm/mach-qcom/Kconfig
++++ linux-4.14.54/arch/arm/mach-qcom/Kconfig
 @@ -27,4 +27,9 @@ config ARCH_MDM9615
  	bool "Enable support for MDM9615"
  	select CLKSRC_QCOM
diff --git a/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
new file mode 100644
index 0000000000..6710caf657
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.14/075-dt-bindings-phy-qcom-ipq4019-usb-add-binding-documen.patch
@@ -0,0 +1,44 @@
+From 5f01733dc755dfadfa51b7b3c6c160e632fc6002 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 24 Jul 2018 15:09:36 +0200
+Subject: [PATCH 1/3] dt-bindings: phy-qcom-ipq4019-usb: add binding document
+
+This patch adds the binding documentation for the HS/SS USB PHY found
+inside Qualcom Dakota SoCs.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ .../bindings/phy/phy-qcom-ipq4019-usb.txt           | 21 +++++++++++++++++++++
+ 1 file changed, 21 insertions(+)
+ create mode 100644 Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
+
+diff --git a/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
+new file mode 100644
+index 000000000000..362877fcafed
+--- /dev/null
++++ b/Documentation/devicetree/bindings/phy/phy-qcom-ipq4019-usb.txt
+@@ -0,0 +1,21 @@
++Qualcom Dakota HS/SS USB PHY
++
++Required properties:
++ - compatible: "qcom,usb-ss-ipq4019-phy",
++	       "qcom,usb-hs-ipq4019-phy"
++ - reg: offset and length of the registers
++ - #phy-cells: should be 0
++ - resets: the reset controllers as listed below
++ - reset-names: the names of the reset controllers
++	"por_rst" - the POR reset line for SS and HS phys
++	"srif_rst" - the SRIF reset line for HS phys
++Example:
++
++hsphy@a8000 {
++	compatible = "qcom,usb-hs-ipq4019-phy";
++	phy-cells = <0>;
++	reg = <0xa8000 0x40>;
++	resets = <&gcc USB2_HSPHY_POR_ARES>,
++		 <&gcc USB2_HSPHY_S_ARES>;
++	reset-names = "por_rst", "srif_rst";
++};
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
index ee2beaa64d..4cab66b677 100644
--- a/target/linux/ipq40xx/patches-4.14/306-qcom-ipq4019-add-USB-nodes-to-ipq4019-SoC-device-tre.patch
+++ b/target/linux/ipq40xx/patches-4.14/076-phy-qcom-ipq4019-usb-add-driver-for-QCOM-IPQ4019.patch
@@ -1,138 +1,24 @@
-From ea5f4d6f4716f3a0bb4fc3614b7a0e8c0df1cb81 Mon Sep 17 00:00:00 2001
-From: Matthew McClintock <mmcclint@codeaurora.org>
-Date: Thu, 17 Mar 2016 16:22:28 -0500
-Subject: [PATCH] qcom: ipq4019: add USB nodes to ipq4019 SoC device tree
+From 633f0e08498aebfdb932bd71319b4cb136709499 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 24 Jul 2018 14:45:49 +0200
+Subject: [PATCH 2/3] phy: qcom-ipq4019-usb: add driver for QCOM/IPQ4019
 
-This adds the SoC nodes to the ipq4019 device tree and
-enable it for the DK01.1 board.
+Add a driver to setup the USB phy on Qualcom Dakota SoCs.
+The driver sets up HS and SS phys. In case of HS some magic values need to
+be written to magic offsets. These were taken from the SDK driver.
 
-Signed-off-by: Matthew McClintock <mmcclint@codeaurora.org>
-Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
 ---
-Changes:
-	- replaced space with tab
-	- added sleep and mock_utmi clocks
-	- added registers for usb2 and usb3 parent node
-	- changed compatible to qca,ipa4019-dwc3
-	- updated usb2 and usb3 names
-	  (included the reg - in case they become necessary later)
----
- arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
- arch/arm/boot/dts/qcom-ipq4019.dtsi           | 71 +++++++++++++++++++++++++++
- 2 files changed, 91 insertions(+)
+ drivers/phy/qualcomm/Kconfig                |   7 ++
+ drivers/phy/qualcomm/Makefile               |   1 +
+ drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c | 188 ++++++++++++++++++++++++++++
+ 3 files changed, 196 insertions(+)
+ create mode 100644 drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
 
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -101,5 +101,25 @@
- 		wifi@a800000 {
- 			status = "ok";
- 		};
-+
-+		usb3_ss_phy: ssphy@9a000 {
-+			status = "ok";
-+		};
-+
-+		usb3_hs_phy: hsphy@a6000 {
-+			status = "ok";
-+		};
-+
-+		usb3: usb3@8af8800 {
-+			status = "ok";
-+		};
-+
-+		usb2_hs_phy: hsphy@a8000 {
-+			status = "ok";
-+		};
-+
-+		usb2: usb2@60f8800 {
-+			status = "ok";
-+		};
- 	};
- };
---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -539,5 +539,79 @@
- 					  "legacy";
- 			status = "disabled";
- 		};
-+
-+		usb3_ss_phy: ssphy@9a000 {
-+			compatible = "qcom,usb-ss-ipq4019-phy";
-+			#phy-cells = <0>;
-+			reg = <0x9a000 0x800>;
-+			reg-names = "phy_base";
-+			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
-+			reset-names = "por_rst";
-+			status = "disabled";
-+		};
-+
-+		usb3_hs_phy: hsphy@a6000 {
-+			compatible = "qcom,usb-hs-ipq4019-phy";
-+			#phy-cells = <0>;
-+			reg = <0xa6000 0x40>;
-+			reg-names = "phy_base";
-+			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
-+			reset-names = "por_rst", "srif_rst";
-+			status = "disabled";
-+		};
-+
-+		usb3@8af8800 {
-+			compatible = "qcom,dwc3";
-+			reg = <0x8af8800 0x100>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			clocks = <&gcc GCC_USB3_MASTER_CLK>,
-+				 <&gcc GCC_USB3_SLEEP_CLK>,
-+				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
-+			clock-names = "master", "sleep", "mock_utmi";
-+			ranges;
-+			status = "disabled";
-+
-+			dwc3@8a00000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x8a00000 0xf8000>;
-+				interrupts = <0 132 0>;
-+				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
-+				phy-names = "usb2-phy", "usb3-phy";
-+				dr_mode = "host";
-+			};
-+		};
-+
-+		usb2_hs_phy: hsphy@a8000 {
-+			compatible = "qcom,usb-hs-ipq4019-phy";
-+			#phy-cells = <0>;
-+			reg = <0xa8000 0x40>;
-+			reg-names = "phy_base";
-+			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
-+			reset-names = "por_rst", "srif_rst";
-+			status = "disabled";
-+		};
-+
-+		usb2@60f8800 {
-+			compatible = "qcom,dwc3";
-+			reg = <0x60f8800 0x100>;
-+			#address-cells = <1>;
-+			#size-cells = <1>;
-+			clocks = <&gcc GCC_USB2_MASTER_CLK>,
-+				 <&gcc GCC_USB2_SLEEP_CLK>,
-+				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
-+			clock-names = "master", "sleep", "mock_utmi";
-+			ranges;
-+			status = "disabled";
-+
-+			dwc3@6000000 {
-+				compatible = "snps,dwc3";
-+				reg = <0x6000000 0xf8000>;
-+				interrupts = <0 136 0>;
-+				phys = <&usb2_hs_phy>;
-+				phy-names = "usb2-phy";
-+				dr_mode = "host";
-+			};
-+		};
- 	};
- };
---- a/drivers/phy/qualcomm/Kconfig
-+++ b/drivers/phy/qualcomm/Kconfig
+Index: linux-4.14.54/drivers/phy/qualcomm/Kconfig
+===================================================================
+--- linux-4.14.54.orig/drivers/phy/qualcomm/Kconfig
++++ linux-4.14.54/drivers/phy/qualcomm/Kconfig
 @@ -8,6 +8,13 @@ config PHY_QCOM_APQ8064_SATA
  	depends on OF
  	select GENERIC_PHY
@@ -147,17 +33,10 @@ Changes:
  config PHY_QCOM_IPQ806X_SATA
  	tristate "Qualcomm IPQ806x SATA SerDes/PHY driver"
  	depends on ARCH_QCOM
---- a/drivers/phy/qualcomm/Makefile
-+++ b/drivers/phy/qualcomm/Makefile
-@@ -1,5 +1,6 @@
- # SPDX-License-Identifier: GPL-2.0
- obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
-+obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) 	+= phy-qcom-ipq4019-usb.o
- obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
- obj-$(CONFIG_PHY_QCOM_QMP)		+= phy-qcom-qmp.o
- obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
+Index: linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
+===================================================================
 --- /dev/null
-+++ b/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
++++ linux-4.14.54/drivers/phy/qualcomm/phy-qcom-ipq4019-usb.c
 @@ -0,0 +1,188 @@
 +/*
 + * Copyright (C) 2018 John Crispin <john@phrozen.org>
@@ -347,3 +226,14 @@ Changes:
 +MODULE_DESCRIPTION("QCOM/IPQ4019 USB phy driver");
 +MODULE_AUTHOR("John Crispin <john@phrozen.org>");
 +MODULE_LICENSE("GPL v2");
+Index: linux-4.14.54/drivers/phy/qualcomm/Makefile
+===================================================================
+--- linux-4.14.54.orig/drivers/phy/qualcomm/Makefile
++++ linux-4.14.54/drivers/phy/qualcomm/Makefile
+@@ -1,5 +1,6 @@
+ # SPDX-License-Identifier: GPL-2.0
+ obj-$(CONFIG_PHY_QCOM_APQ8064_SATA)	+= phy-qcom-apq8064-sata.o
++obj-$(CONFIG_PHY_QCOM_IPQ4019_USB)	+= phy-qcom-ipq4019-usb.o
+ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA)	+= phy-qcom-ipq806x-sata.o
+ obj-$(CONFIG_PHY_QCOM_QMP)		+= phy-qcom-qmp.o
+ obj-$(CONFIG_PHY_QCOM_QUSB2)		+= phy-qcom-qusb2.o
diff --git a/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
new file mode 100644
index 0000000000..7cc7d9d5f4
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.14/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
@@ -0,0 +1,130 @@
+From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 24 Jul 2018 14:47:55 +0200
+Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
+
+This patch makes USB work on the Dakota EVB.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
+ arch/arm/boot/dts/qcom-ipq4019.dtsi           | 74 +++++++++++++++++++++++++++
+ 2 files changed, 94 insertions(+)
+
+diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+index 418f9a022336..2ee5f05d5a43 100644
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -109,5 +109,25 @@
+ 		wifi@a800000 {
+ 			status = "ok";
+ 		};
++
++		usb3_ss_phy: ssphy@9a000 {
++			status = "ok";
++		};
++
++		usb3_hs_phy: hsphy@a6000 {
++			status = "ok";
++		};
++
++		usb3: usb3@8af8800 {
++			status = "ok";
++		};
++
++		usb2_hs_phy: hsphy@a8000 {
++			status = "ok";
++		};
++
++		usb2: usb2@60f8800 {
++			status = "ok";
++		};
+ 	};
+ };
+diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+index e5e52adbd5a3..e6b12129f0e4 100644
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -553,5 +553,79 @@
+ 					  "legacy";
+ 			status = "disabled";
+ 		};
++
++		usb3_ss_phy: ssphy@9a000 {
++			compatible = "qcom,usb-ss-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0x9a000 0x800>;
++			reg-names = "phy_base";
++			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
++			reset-names = "por_rst";
++			status = "disabled";
++		};
++
++		usb3_hs_phy: hsphy@a6000 {
++			compatible = "qcom,usb-hs-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0xa6000 0x40>;
++			reg-names = "phy_base";
++			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
++			reset-names = "por_rst", "srif_rst";
++			status = "disabled";
++		};
++
++		usb3@8af8800 {
++			compatible = "qcom,dwc3";
++			reg = <0x8af8800 0x100>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc GCC_USB3_MASTER_CLK>,
++				 <&gcc GCC_USB3_SLEEP_CLK>,
++				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
++			clock-names = "master", "sleep", "mock_utmi";
++			ranges;
++			status = "disabled";
++
++			dwc3@8a00000 {
++				compatible = "snps,dwc3";
++				reg = <0x8a00000 0xf8000>;
++				interrupts = <0 132 0>;
++				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
++				phy-names = "usb2-phy", "usb3-phy";
++				dr_mode = "host";
++			};
++		};
++
++		usb2_hs_phy: hsphy@a8000 {
++			compatible = "qcom,usb-hs-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0xa8000 0x40>;
++			reg-names = "phy_base";
++			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
++			reset-names = "por_rst", "srif_rst";
++			status = "disabled";
++		};
++
++		usb2@60f8800 {
++			compatible = "qcom,dwc3";
++			reg = <0x60f8800 0x100>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc GCC_USB2_MASTER_CLK>,
++				 <&gcc GCC_USB2_SLEEP_CLK>,
++				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
++			clock-names = "master", "sleep", "mock_utmi";
++			ranges;
++			status = "disabled";
++
++			dwc3@6000000 {
++				compatible = "snps,dwc3";
++				reg = <0x6000000 0xf8000>;
++				interrupts = <0 136 0>;
++				phys = <&usb2_hs_phy>;
++				phy-names = "usb2-phy";
++				dr_mode = "host";
++			};
++		};
+ 	};
+ };
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/101-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch
index 0f039f206b..6f522ffcad 100644
--- a/target/linux/ipq40xx/patches-4.14/101-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch
+++ b/target/linux/ipq40xx/patches-4.14/078-ARM-dts-ipq4019-Add-a-few-peripheral-nodes.patch
@@ -1,42 +1,89 @@
-From patchwork Mon Jan 29 05:11:16 2018
-Content-Type: text/plain; charset="utf-8"
-MIME-Version: 1.0
-Content-Transfer-Encoding: 7bit
-Subject: [02/15] ARM: dts: ipq4019: Add a few peripheral nodes
+From 187519403273f0599c848d20eca9acce8b1807a5 Mon Sep 17 00:00:00 2001
 From: Sricharan R <sricharan@codeaurora.org>
-X-Patchwork-Id: 10189263
-Message-Id: <1517202689-14212-3-git-send-email-sricharan@codeaurora.org>
-To: robh+dt@kernel.org, robh@kernel.org, mark.rutland@arm.com,
- linux@armlinux.org.uk, andy.gross@linaro.org, david.brown@linaro.org, 
- catalin.marinas@arm.com, will.deacon@arm.com, sboyd@codeaurora.org,
- bjorn.andersson@linaro.org, devicetree@vger.kernel.org,
- linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
- linux-arm-msm@vger.kernel.org, linux-soc@vger.kernel.org
-Cc: sricharan@codeaurora.org
-Date: Mon, 29 Jan 2018 10:41:16 +0530
+Date: Fri, 25 May 2018 11:41:12 +0530
+Subject: [PATCH] ARM: dts: ipq4019: Add a few peripheral nodes
 
 Now with the driver updates for some peripherals being there,
 add i2c, spi, pcie, bam, qpic-nand, scm nodes to enhance the available
 peripheral support.
 
+Reviewed-by: Abhishek Sahu <absahu@codeaurora.org>
 Signed-off-by: Sricharan R <sricharan@codeaurora.org>
+Signed-off-by: Andy Gross <andy.gross@linaro.org>
 ---
- arch/arm/boot/dts/qcom-ipq4019.dtsi | 134 ++++++++++++++++++++++++++++++++++++
- 1 file changed, 134 insertions(+)
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi |   2 +-
+ arch/arm/boot/dts/qcom-ipq4019.dtsi           | 156 ++++++++++++++++++++++++--
+ 2 files changed, 146 insertions(+), 12 deletions(-)
 
+diff --git a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+index ef8d8c88ed7b..418f9a022336 100644
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -69,7 +69,7 @@
+ 			status = "ok";
+ 		};
+ 
+-		spi_0: spi@78b5000 {
++		spi@78b5000 {
+ 			pinctrl-0 = <&spi_0_pins>;
+ 			pinctrl-names = "default";
+ 			status = "ok";
+diff --git a/arch/arm/boot/dts/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+index 2efc8a2d41a7..737097e9fb4f 100644
 --- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
 +++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
-@@ -25,7 +25,9 @@
+@@ -40,8 +40,10 @@
+ 	};
  
  	aliases {
- 		spi0 = &spi_0;
-+		spi1 = &spi_1;
- 		i2c0 = &i2c_0;
-+		i2c1 = &i2c_1;
+-		spi0 = &spi_0;
+-		i2c0 = &i2c_0;
++		spi0 = &blsp1_spi1;
++		spi1 = &blsp1_spi2;
++		i2c0 = &blsp1_i2c3;
++		i2c1 = &blsp1_i2c4;
  	};
  
  	cpus {
-@@ -190,6 +192,22 @@
+@@ -120,6 +122,12 @@
+ 		};
+ 	};
+ 
++	firmware {
++		scm {
++			compatible = "qcom,scm-ipq4019";
++		};
++	};
++
+ 	timer {
+ 		compatible = "arm,armv7-timer";
+ 		interrupts = <1 2 0xf08>,
+@@ -165,13 +173,13 @@
+ 			#gpio-cells = <2>;
+ 			interrupt-controller;
+ 			#interrupt-cells = <2>;
+-			interrupts = <0 208 0>;
++			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ 		};
+ 
+ 		blsp_dma: dma@7884000 {
+ 			compatible = "qcom,bam-v1.7.0";
+ 			reg = <0x07884000 0x23000>;
+-			interrupts = <GIC_SPI 238 IRQ_TYPE_NONE>;
++			interrupts = <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&gcc GCC_BLSP1_AHB_CLK>;
+ 			clock-names = "bam_clk";
+ 			#dma-cells = <1>;
+@@ -179,7 +187,7 @@
+ 			status = "disabled";
+ 		};
+ 
+-		spi_0: spi@78b5000 {
++		blsp1_spi1: spi@78b5000 { /* BLSP1 QUP1 */
+ 			compatible = "qcom,spi-qup-v2.2.1";
+ 			reg = <0x78b5000 0x600>;
+ 			interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+@@ -188,10 +196,26 @@
  			clock-names = "core", "iface";
  			#address-cells = <1>;
  			#size-cells = <0>;
@@ -45,7 +92,7 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
 +			status = "disabled";
 +		};
 +
-+		spi_1: spi@78b6000 { /* BLSP1 QUP2 */
++		blsp1_spi2: spi@78b6000 { /* BLSP1 QUP2 */
 +			compatible = "qcom,spi-qup-v2.2.1";
 +			reg = <0x78b6000 0x600>;
 +			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
@@ -59,7 +106,12 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
  			status = "disabled";
  		};
  
-@@ -202,9 +220,24 @@
+-		i2c_0: i2c@78b7000 {
++		blsp1_i2c3: i2c@78b7000 { /* BLSP1 QUP3 */
+ 			compatible = "qcom,i2c-qup-v2.2.1";
+ 			reg = <0x78b7000 0x600>;
+ 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+@@ -200,14 +224,29 @@
  			clock-names = "iface", "core";
  			#address-cells = <1>;
  			#size-cells = <0>;
@@ -68,7 +120,7 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
  			status = "disabled";
  		};
  
-+		i2c_1: i2c@78b8000 { /* BLSP1 QUP4 */
++		blsp1_i2c4: i2c@78b8000 { /* BLSP1 QUP4 */
 +			compatible = "qcom,i2c-qup-v2.2.1";
 +			reg = <0x78b8000 0x600>;
 +			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
@@ -84,7 +136,31 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
  
  		cryptobam: dma@8e04000 {
  			compatible = "qcom,bam-v1.7.0";
-@@ -311,6 +344,101 @@
+ 			reg = <0x08e04000 0x20000>;
+-			interrupts = <GIC_SPI 207 0>;
++			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+ 			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+ 			clock-names = "bam_clk";
+ 			#dma-cells = <1>;
+@@ -275,7 +314,7 @@
+ 		blsp1_uart1: serial@78af000 {
+ 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ 			reg = <0x78af000 0x200>;
+-			interrupts = <0 107 0>;
++			interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+ 			status = "disabled";
+ 			clocks = <&gcc GCC_BLSP1_UART1_APPS_CLK>,
+ 				<&gcc GCC_BLSP1_AHB_CLK>;
+@@ -287,7 +326,7 @@
+ 		serial@78b0000 {
+ 			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+ 			reg = <0x78b0000 0x200>;
+-			interrupts = <0 108 0>;
++			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+ 			status = "disabled";
+ 			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+ 				<&gcc GCC_BLSP1_AHB_CLK>;
+@@ -309,6 +348,101 @@
  			reg = <0x4ab000 0x4>;
  		};
  
@@ -105,7 +181,7 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
 +			ranges = <0x81000000 0 0x40200000 0x40200000 0 0x00100000
 +				  0x82000000 0 0x48000000 0x48000000 0 0x10000000>;
 +
-+			interrupts = <GIC_SPI 141 IRQ_TYPE_NONE>;
++			interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>;
 +			interrupt-names = "msi";
 +			#interrupt-cells = <1>;
 +			interrupt-map-mask = <0 0 0 0x7>;
@@ -186,3 +262,24 @@ Signed-off-by: Sricharan R <sricharan@codeaurora.org>
  		wifi0: wifi@a000000 {
  			compatible = "qcom,ipq4019-wifi";
  			reg = <0xa000000 0x200000>;
+@@ -342,7 +476,7 @@
+ 				     <GIC_SPI 45 IRQ_TYPE_EDGE_RISING>,
+ 				     <GIC_SPI 46 IRQ_TYPE_EDGE_RISING>,
+ 				     <GIC_SPI 47 IRQ_TYPE_EDGE_RISING>,
+-				     <GIC_SPI 168 IRQ_TYPE_NONE>;
++				     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ 			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
+ 					   "msi4",  "msi5",  "msi6",  "msi7",
+ 					   "msi8",  "msi9", "msi10", "msi11",
+@@ -384,7 +518,7 @@
+ 				     <GIC_SPI 61 IRQ_TYPE_EDGE_RISING>,
+ 				     <GIC_SPI 62 IRQ_TYPE_EDGE_RISING>,
+ 				     <GIC_SPI 63 IRQ_TYPE_EDGE_RISING>,
+-				     <GIC_SPI 169 IRQ_TYPE_NONE>;
++				     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ 			interrupt-names =  "msi0",  "msi1",  "msi2",  "msi3",
+ 					   "msi4",  "msi5",  "msi6",  "msi7",
+ 					   "msi8",  "msi9", "msi10", "msi11",
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/102-ARM-dts-ipq4019-fix-PCI-range.patch b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch
index eaccb00bb0..eaccb00bb0 100644
--- a/target/linux/ipq40xx/patches-4.14/102-ARM-dts-ipq4019-fix-PCI-range.patch
+++ b/target/linux/ipq40xx/patches-4.14/079-ARM-dts-ipq4019-fix-PCI-range.patch
diff --git a/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
index 57ed940fd1..57ed940fd1 100644
--- a/target/linux/ipq40xx/patches-4.14/105-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
+++ b/target/linux/ipq40xx/patches-4.14/080-pinctrl-msm-fix-gpio-hog-related-boot-issues.patch
diff --git a/target/linux/ipq40xx/patches-4.14/900-clk-fix.patch b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch
index 1c6b8c831d..dcf17874b3 100644
--- a/target/linux/ipq40xx/patches-4.14/900-clk-fix.patch
+++ b/target/linux/ipq40xx/patches-4.14/081-clk-fix-apss-cpu-overclocking.patch
@@ -1,7 +1,7 @@
-From 12e9319da1adacac92930c899c99f0e1970cac11 Mon Sep 17 00:00:00 2001
+From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001
 From: Christian Lamparter <chunkeey@googlemail.com>
-Date: Thu, 11 Mar 2018 14:41:31 +0100
-Subject: [PATCH] clk: fix apss cpu overclocking
+Date: Sun, 11 Mar 2018 14:41:31 +0100
+Subject: [PATCH 2/2] clk: fix apss cpu overclocking
 
 There's an interaction issue between the clk changes:"
 clk: qcom: ipq4019: Add the apss cpu pll divider clock node
@@ -37,10 +37,16 @@ try to overclock to 761 MHz.
 
 Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node")
 Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
+Signed-off-by: John Crispin <john@phrozen.org>
 ---
+ drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++---
+ 1 file changed, 31 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/clk/qcom/gcc-ipq4019.c b/drivers/clk/qcom/gcc-ipq4019.c
+index 46cb256b4aa2..4ec43f7d2e52 100644
 --- a/drivers/clk/qcom/gcc-ipq4019.c
 +++ b/drivers/clk/qcom/gcc-ipq4019.c
-@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fe
+@@ -1253,6 +1253,29 @@ static const struct clk_fepll_vco gcc_fepll_vco = {
  	.reg = 0x2f020,
  };
  
@@ -70,7 +76,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  /*
   * Round rate function for APSS CPU PLL Clock divider.
   * It looks up the frequency table and returns the next higher frequency
-@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struc
+@@ -1265,7 +1288,7 @@ static long clk_cpu_div_round_rate(struct clk_hw *hw, unsigned long rate,
  	struct clk_hw *p_hw;
  	const struct freq_tbl *f;
  
@@ -79,7 +85,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  	if (!f)
  		return -EINVAL;
  
-@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct c
+@@ -1288,7 +1311,7 @@ static int clk_cpu_div_set_rate(struct clk_hw *hw, unsigned long rate,
  	u32 mask;
  	int ret;
  
@@ -96,7 +102,7 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  	struct clk_fepll *pll = to_clk_fepll(hw);
  	u32 cdiv, pre_div;
  	u64 rate;
-@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h
+@@ -1335,7 +1359,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *hw,
  	rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2;
  	do_div(rate, pre_div);
  
@@ -109,3 +115,6 @@ Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
  };
  
  static const struct clk_ops clk_regmap_cpu_div_ops = {
+-- 
+2.11.0
+
diff --git a/target/linux/ipq40xx/patches-4.14/865-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch
index 56ae66b089..56ae66b089 100644
--- a/target/linux/ipq40xx/patches-4.14/865-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch
+++ b/target/linux/ipq40xx/patches-4.14/082-ARM-dts-ipq4019-Add-TZ-and-SMEM-reserved-regions.patch
diff --git a/target/linux/ipq40xx/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch b/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch
index 295bc163b3..295bc163b3 100644
--- a/target/linux/ipq40xx/patches-4.14/104-mtd-nand-add-Winbond-manufacturer-and-chip.patch
+++ b/target/linux/ipq40xx/patches-4.14/083-mtd-nand-add-Winbond-manufacturer-and-chip.patch
diff --git a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch
index 9079a06df8..b24d85ba13 100644
--- a/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch
+++ b/target/linux/ipq40xx/patches-4.14/900-dts-ipq4019-ap-dk01.1.patch
@@ -1,5 +1,7 @@
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+===================================================================
+--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
 @@ -15,12 +15,39 @@
   */
  
@@ -40,9 +42,7 @@
  		rng@22000 {
  			status = "ok";
  		};
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -93,14 +93,6 @@
+@@ -66,14 +93,6 @@
  			pinctrl-names = "default";
  			status = "ok";
  			cs-gpios = <&tlmm 54 0>;
@@ -57,11 +57,38 @@
  		};
  
  		serial@78af000 {
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-@@ -19,4 +19,71 @@
+@@ -102,6 +121,22 @@
+ 			status = "ok";
+ 		};
+ 
++		mdio@90000 {
++			status = "okay";
++		};
++
++		ess-switch@c000000 {
++			status = "okay";
++		};
++
++		ess-psgmii@98000 {
++			status = "okay";
++		};
++
++		edma@c080000 {
++			status = "okay";
++		};
++
+ 		usb3_ss_phy: ssphy@9a000 {
+ 			status = "ok";
+ 		};
+Index: linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+===================================================================
+--- linux-4.14.54.orig/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
++++ linux-4.14.54/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
+@@ -18,5 +18,73 @@
+ 
  / {
  	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
++	compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
  
 +	memory {
 +		device_type = "memory";
@@ -69,7 +96,7 @@
 +	};
 +};
 +
-+&spi_0 {
++&blsp1_spi1 {
 +	mx25l25635f@0 {
 +		compatible = "mx25l25635f", "jedec,spi-nor";
 +		#address-cells = <1>;
@@ -131,38 +158,3 @@
 +		};
 +	};
  };
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1-c1.dts
-@@ -18,6 +18,7 @@
- 
- / {
- 	model = "Qualcomm Technologies, Inc. IPQ40xx/AP-DK01.1-C1";
-+	compatible = "qcom,ap-dk01.1-c1", "qcom,ap-dk01.2-c1", "qcom,ipq4019";
- 
- 	memory {
- 		device_type = "memory";
---- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-+++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
-@@ -121,6 +121,22 @@
- 			status = "ok";
- 		};
- 
-+		mdio@90000 {
-+			status = "okay";
-+		};
-+
-+		ess-switch@c000000 {
-+			status = "okay";
-+		};
-+
-+		ess-psgmii@98000 {
-+			status = "okay";
-+		};
-+
-+		edma@c080000 {
-+			status = "okay";
-+		};
-+
- 		usb3_ss_phy: ssphy@9a000 {
- 			status = "ok";
- 		};