ipq40xx: Add patches for 4.19

This adds the necessary patches for 4.19 kernel.
Upstreamed patches were dropped, backported upstreamed patches
from 4.20.
Drop Winbond ID patch since that NAND IC was upstreamed to use
SPI-NAND framework and support for it was backported from 4.20.
Rework ESSEDMA patches to compile under 4.19 due to timer changes,
Clément Péron did the hard work and his changes were taken from the
initial 4.19 PR.
MR33 changes had to be manually refreshed to apply.
Refresh other patches to apply.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove

1 files changed, 52 insertions, 0 deletions

diff --git a/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch b/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
new file mode 100644
index 0000000000..0e1bb87368
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.19/701-dts-ipq4019-add-mdio-node.patch
@@ -0,0 +1,52 @@
+From 09ed737593f71bcca08a537a6c15264a1a6add08 Mon Sep 17 00:00:00 2001
+From: Christian Lamparter <chunkeey@gmail.com>
+Date: Sun, 20 Nov 2016 01:10:33 +0100
+Subject: [PATCH] dts: ipq4019: add mdio node for ethernet
+
+This patch adds the mdio device-tree node.
+This is where the switch is connected to, so it's needed
+for the ethernet interfaces.
+
+Note: The driver isn't anywhere close to be upstream,
+so the info might change.
+---
+ arch/arm/boot/dts/qcom-ipq4019.dtsi | 28 ++++++++++++++++++++++++++++
+ 1 file changed, 28 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -566,6 +566,34 @@
+ 			status = "disabled";
+ 		};
+ 
++		mdio@90000 {
++			#address-cells = <1>;
++			#size-cells = <0>;
++			compatible = "qcom,ipq4019-mdio";
++			reg = <0x90000 0x64>;
++			status = "disabled";
++
++			ethernet-phy@0 {
++				reg = <0>;
++			};
++
++			ethernet-phy@1 {
++				reg = <1>;
++			};
++
++			ethernet-phy@2 {
++				reg = <2>;
++			};
++
++			ethernet-phy@3 {
++				reg = <3>;
++			};
++
++			ethernet-phy@4 {
++				reg = <4>;
++			};
++		};
++
+ 		usb3_ss_phy: ssphy@9a000 {
+ 			compatible = "qcom,usb-ss-ipq4019-phy";
+ 			#phy-cells = <0>;