ipq40xx: Add patches for 4.19

This adds the necessary patches for 4.19 kernel.
Upstreamed patches were dropped, backported upstreamed patches
from 4.20.
Drop Winbond ID patch since that NAND IC was upstreamed to use
SPI-NAND framework and support for it was backported from 4.20.
Rework ESSEDMA patches to compile under 4.19 due to timer changes,
Clément Péron did the hard work and his changes were taken from the
initial 4.19 PR.
MR33 changes had to be manually refreshed to apply.
Refresh other patches to apply.

Signed-off-by: Robert Marko <robimarko@gmail.com>
Remove

1 files changed, 123 insertions, 0 deletions

diff --git a/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
new file mode 100644
index 0000000000..419e36424a
--- /dev/null
+++ b/target/linux/ipq40xx/patches-4.19/077-qcom-ipq4019-add-USB-devicetree-nodes.patch
@@ -0,0 +1,123 @@
+From 1fc7d5523e21ed140fed43c4dde011a3b6d9ba08 Mon Sep 17 00:00:00 2001
+From: John Crispin <john@phrozen.org>
+Date: Tue, 24 Jul 2018 14:47:55 +0200
+Subject: [PATCH 3/3] qcom: ipq4019: add USB devicetree nodes
+
+This patch makes USB work on the Dakota EVB.
+
+Signed-off-by: John Crispin <john@phrozen.org>
+---
+ arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi | 20 ++++++++
+ arch/arm/boot/dts/qcom-ipq4019.dtsi           | 74 +++++++++++++++++++++++++++
+ 2 files changed, 94 insertions(+)
+
+--- a/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019-ap.dk01.1.dtsi
+@@ -109,5 +109,25 @@
+ 		wifi@a800000 {
+ 			status = "ok";
+ 		};
++
++		usb3_ss_phy: ssphy@9a000 {
++			status = "ok";
++		};
++
++		usb3_hs_phy: hsphy@a6000 {
++			status = "ok";
++		};
++
++		usb3: usb3@8af8800 {
++			status = "ok";
++		};
++
++		usb2_hs_phy: hsphy@a8000 {
++			status = "ok";
++		};
++
++		usb2: usb2@60f8800 {
++			status = "ok";
++		};
+ 	};
+ };
+--- a/arch/arm/boot/dts/qcom-ipq4019.dtsi
++++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi
+@@ -564,5 +564,79 @@
+ 					  "legacy";
+ 			status = "disabled";
+ 		};
++
++		usb3_ss_phy: ssphy@9a000 {
++			compatible = "qcom,usb-ss-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0x9a000 0x800>;
++			reg-names = "phy_base";
++			resets = <&gcc USB3_UNIPHY_PHY_ARES>;
++			reset-names = "por_rst";
++			status = "disabled";
++		};
++
++		usb3_hs_phy: hsphy@a6000 {
++			compatible = "qcom,usb-hs-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0xa6000 0x40>;
++			reg-names = "phy_base";
++			resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>;
++			reset-names = "por_rst", "srif_rst";
++			status = "disabled";
++		};
++
++		usb3@8af8800 {
++			compatible = "qcom,dwc3";
++			reg = <0x8af8800 0x100>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc GCC_USB3_MASTER_CLK>,
++				 <&gcc GCC_USB3_SLEEP_CLK>,
++				 <&gcc GCC_USB3_MOCK_UTMI_CLK>;
++			clock-names = "master", "sleep", "mock_utmi";
++			ranges;
++			status = "disabled";
++
++			dwc3@8a00000 {
++				compatible = "snps,dwc3";
++				reg = <0x8a00000 0xf8000>;
++				interrupts = <0 132 0>;
++				phys = <&usb3_hs_phy>, <&usb3_ss_phy>;
++				phy-names = "usb2-phy", "usb3-phy";
++				dr_mode = "host";
++			};
++		};
++
++		usb2_hs_phy: hsphy@a8000 {
++			compatible = "qcom,usb-hs-ipq4019-phy";
++			#phy-cells = <0>;
++			reg = <0xa8000 0x40>;
++			reg-names = "phy_base";
++			resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>;
++			reset-names = "por_rst", "srif_rst";
++			status = "disabled";
++		};
++
++		usb2@60f8800 {
++			compatible = "qcom,dwc3";
++			reg = <0x60f8800 0x100>;
++			#address-cells = <1>;
++			#size-cells = <1>;
++			clocks = <&gcc GCC_USB2_MASTER_CLK>,
++				 <&gcc GCC_USB2_SLEEP_CLK>,
++				 <&gcc GCC_USB2_MOCK_UTMI_CLK>;
++			clock-names = "master", "sleep", "mock_utmi";
++			ranges;
++			status = "disabled";
++
++			dwc3@6000000 {
++				compatible = "snps,dwc3";
++				reg = <0x6000000 0xf8000>;
++				interrupts = <0 136 0>;
++				phys = <&usb2_hs_phy>;
++				phy-names = "usb2-phy";
++				dr_mode = "host";
++			};
++		};
+ 	};
+ };