aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/image
diff options
context:
space:
mode:
authorRichard Yu <yurichard3839@gmail.com>2021-11-12 11:16:21 +0800
committerChristian Lamparter <chunkeey@gmail.com>2021-11-14 14:28:34 +0100
commit12d33d388c52565803a746586426bed3d3fcc941 (patch)
tree4fa4801f401bad56f741e22ffb67211b89512049 /target/linux/ipq40xx/image
parentb5ab6d0bc577e81a77f39211883f6c0c4155b6ed (diff)
downloadupstream-12d33d388c52565803a746586426bed3d3fcc941.tar.gz
upstream-12d33d388c52565803a746586426bed3d3fcc941.tar.bz2
upstream-12d33d388c52565803a746586426bed3d3fcc941.zip
ipq40xx: add support for P&W R619AC (aka G-DOCK 2.0)
P&W R619AC is a IPQ4019 Dual-Band AC1200 router. It is made by P&W (p2w-tech.com) known as P&W R619AC but marketed and sold more popularly as G-DOCK 2.0. Specification: * SOC: Qualcomm Atheros IPQ4019 (717 MHz) * RAM: 512 MiB * Flash: 16 MiB (NOR) + 128 MiB (NAND) * Ethernet: 5 x 10/100/1000 (4 x LAN, 1 x WAN) * Wireless: - 2.4 GHz b/g/n Qualcomm Atheros IPQ4019 - 5 GHz a/n/ac Qualcomm Atheros IPQ4019 * USB: 1 x USB 3.0 * LED: 4 x LAN, 1 x WAN, 2 x WiFi, 1 x Power (All Blue LED) * Input: 1 x reset * 1 x MicroSD card slot * Serial console: 115200bps, pinheader J2 on PCB * Power: DC 12V 2A * 1 x Unpopulated mPCIe Slot (see below how to connect it) * 1 x Unpopulated Sim Card Slot Installation: 1. Access to tty console via UART serial 2. Enter failsafe mode and mount rootfs <https://openwrt.org/docs/guide-user/troubleshooting/failsafe_and_factory_reset> 3. Edit inittab to enable shell on tty console `sed -i 's/#ttyM/ttyM/' /etc/inittab` 4. Reboot and upload `-nand-factory.bin` to the router (using wget) 5. Use `sysupgrade` command to install Another installation method is to hijack the upgrade server domain of stock firmware, because it's using insecure http. This commit is based on @LGA1150(at GitHub)'s work <https://github.com/LGA1150/openwrt/commit/a4932c8d5a275d1fb4297bd20ec03f9270a45d1c> With some changes: 1. Added `qpic_bam` node in dts. I don't know much about this, but I observed other dtses have this node. 2. Removed `ldo` node under `sd_0_pinmux`, because `ldo` cause SD card not working. This fix is from <https://github.com/coolsnowwolf/lede/commit/51143b4c7571f717afe071db60bbb4db1532cbf2> 3. Removed the 32MB NOR variant. 4. Removed `cd-gpios` in `sdhci` node, because it's reported that it makes wlan2g led light up. 5. Added ethphy led config in dts. 6. Changed nand partition label from `rootfs` to `ubi`. About the 128MiB variant: The stock bootloader sets size of nand to 64MiB. But most of this devices have 128MiB nand. If you want to use all 128MiB, you need to modify the `MIBIB` data of bootloader. More details can be found on github: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-818770060> For instructions on how to flash the MIBIB partition from u-boot console: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-819138232> About the Mini PCIe slot: (from "ygleg") "The REFCLK signals on the Mini PCIe slot is not connected on this board out of the box. If you want to use the Mini PCIe slot on the board, you need to (preferably) solder two 0402 resistors: R436 (REFCLK+) and R444 (REFCLK-)..." This and much more information is provoided in the github comment: <https://github.com/openwrt/openwrt/pull/3691#issuecomment-968054670> Signed-off-by: Richard Yu <yurichard3839@gmail.com> Signed-off-by: DENG Qingfang <dqfext@gmail.com> [Added comment about MIBIB+128 MiB variant. Added commit message section about pcie slot. Renamed gpio-leds' subnodes and added color, function+enum properties.] Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/image')
-rw-r--r--target/linux/ipq40xx/image/generic.mk26
1 files changed, 26 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/image/generic.mk b/target/linux/ipq40xx/image/generic.mk
index e2ccafd162..6956679e37 100644
--- a/target/linux/ipq40xx/image/generic.mk
+++ b/target/linux/ipq40xx/image/generic.mk
@@ -753,6 +753,32 @@ define Device/openmesh_a62
endef
TARGET_DEVICES += openmesh_a62
+define Device/p2w_r619ac
+ $(call Device/FitzImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := P&W
+ DEVICE_MODEL := R619AC
+ SOC := qcom-ipq4019
+ DEVICE_DTS_CONFIG := config@10
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ DEVICE_PACKAGES := ipq-wifi-p2w_r619ac
+endef
+
+define Device/p2w_r619ac-64m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 64M NAND
+ IMAGES += nand-factory.bin
+ IMAGE/nand-factory.bin := append-ubi | qsdk-ipq-factory-nand
+endef
+TARGET_DEVICES += p2w_r619ac-64m
+
+define Device/p2w_r619ac-128m
+ $(call Device/p2w_r619ac)
+ DEVICE_VARIANT := 128M NAND
+endef
+TARGET_DEVICES += p2w_r619ac-128m
+
define Device/plasmacloud_pa1200
$(call Device/FitImageLzma)
DEVICE_VENDOR := Plasma Cloud