diff options
| author | Yanase Yuki <dev@zpc.sakura.ne.jp> | 2020-01-29 19:27:25 +0900 |
|---|---|---|
| committer | Petr Štetiar <ynezz@true.cz> | 2020-07-08 16:07:05 +0200 |
| commit | 4a77a060ab6219f830390cd53c2817b621f39760 (patch) | |
| tree | 7bfaab6550c63807fb27b3db4ae5f2f26c12eecb /target/linux/ipq40xx/image | |
| parent | d2c3131b3fcc55d9c26abdb7cd3c32d3827c10ed (diff) | |
| download | upstream-4a77a060ab6219f830390cd53c2817b621f39760.tar.gz upstream-4a77a060ab6219f830390cd53c2817b621f39760.tar.bz2 upstream-4a77a060ab6219f830390cd53c2817b621f39760.zip | |
ipq40xx: add support for Buffalo WTR-M2133HP
Buffalo WTR-M2133HP is a Tri-Band router based on IPQ4019.
Specification
-------------
- SoC: Qualcomm IPQ4019
- RAM: 512MiB
- Flash Memory: NAND 128MiB (MXIC MX30LF1G18AC)
- Wi-Fi: Qualcomm IPQ4019 (2.4GHz, 1ch - 13ch)
- Wi-Fi: Qualcomm IPQ4019 (5GHz, 36ch - 64ch)
- Wi-Fi: Qualcomm QCA9984 (2T2R, 5GHz, 100ch - 140ch)
- Ethernet: 4x 10/100/1000 Mbps (1x WAN, 3x LAN)
- LED: 4x white LED, 4x orange LED, 1x blue LED
- USB: 1x USB 3.0 port
- Input: 2x tactile switch, 2x slide switch (2x SP3T)
- Serial console: 115200bps, pinheader JP5 on PCB
- Power: DC 12V 2A
Flash instruction
-----------------
1. Set up a TFTP server (IP address: 192.168.11.10)
2. Rename "initramfs-fit-uImage.itb" to "WTR-M2133HP-initramfs.uImage"
and put it into the TFTP server directory.
3. Connect the TFTP server and WTR-M2133HP.
4. Hold down the AOSS button, then power on the router.
5. After booting OpenWrt initramfs image, connect to the router by SSH.
6. Transfer "squashfs-nand-factory.ubi" to the router.
7. Execute the following commands.
# ubidetach -p /dev/mtd15
# ubiformat /dev/mtd15 -f /tmp/openwrt-ipq40xx-generic-buffalo_wtr-m2133hp-squashfs-nand-factory.ubi
# fw_setenv bootcmd bootipq
8. Perform reboot.
Recover to stock firmware
-------------------------
1. Execute the following command.
# fw_setenv bootcmd bootbf
2. Reboot and wait several minutes.
Signed-off-by: Yanase Yuki <dev@zpc.sakura.ne.jp>
Diffstat (limited to 'target/linux/ipq40xx/image')
| -rw-r--r-- | target/linux/ipq40xx/image/Makefile | 12 |
1 files changed, 12 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile index 5336649c3d..51e8bcc7e3 100644 --- a/target/linux/ipq40xx/image/Makefile +++ b/target/linux/ipq40xx/image/Makefile @@ -245,6 +245,18 @@ define Device/avm_fritzrepeater-3000 endef TARGET_DEVICES += avm_fritzrepeater-3000 +define Device/buffalo_wtr-m2133hp + $(call Device/FitImage) + $(call Device/UbiFit) + DEVICE_VENDOR := Buffalo + DEVICE_MODEL := WTR-M2133HP + SOC := qcom-ipq4019 + DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9984-ct ipq-wifi-buffalo_wtr-m2133hp + BLOCKSIZE := 128k + PAGESIZE := 2048 +endef +TARGET_DEVICES += buffalo_wtr-m2133hp + define Device/cellc_rtl30vw KERNEL_SUFFIX := -fit-uImage.itb KERNEL_INITRAMFS = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb |