aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ipq40xx/image
diff options
context:
space:
mode:
authorDongming Han <handongming@gl-inet.com>2020-07-22 15:12:17 +0800
committerPetr Štetiar <ynezz@true.cz>2020-12-25 10:38:13 +0100
commitb9389186b012e5bd99ea6523b8220aaee6ca0085 (patch)
treedbd3f2cbff4b01a787e1f55cc7bbddd7c3ae83dd /target/linux/ipq40xx/image
parent3bb16185737c011b74e3166cf436785604b5f47f (diff)
downloadupstream-b9389186b012e5bd99ea6523b8220aaee6ca0085.tar.gz
upstream-b9389186b012e5bd99ea6523b8220aaee6ca0085.tar.bz2
upstream-b9389186b012e5bd99ea6523b8220aaee6ca0085.zip
ipq40xx: add support for GL.iNet GL-AP1300
Specifications: SOC: Qualcomm IPQ4018 (DAKOTA) ARM Quad-Core RAM: 256 MiB FLASH1: 4 MiB NOR FLASH2: 128 MiB NAND ETH: Qualcomm QCA8075 WLAN1: Qualcomm Atheros QCA4018 2.4GHz 802.11b/g/n 2x2 WLAN2: Qualcomm Atheros QCA4018 5GHz 802.11n/ac W2 2x2 INPUT: Reset LED: Power, Internet UART1: On board pin header near to LED (3.3V, TX, RX, GND), 3.3V without pin - 115200 8N1 OTHER: On board with BLE module - by cp210x USB serial chip On board hareware watchdog with GPIO0 high to turn on, and GPIO4 for watchdog feed Install via uboot tftp or uboot web failsafe. By uboot tftp: (IPQ40xx) # tftpboot 0x84000000 openwrt-ipq40xx-generic-glinet_gl-ap1300-squashfs-nand-factory.ubi (IPQ40xx) # run lf By uboot web failsafe: Push the reset button for 10 seconds util the power led flash faster, then use broswer to access http://192.168.1.1 Afterwards upgrade can use sysupgrade image. Signed-off-by: Dongming Han <handongming@gl-inet.com>
Diffstat (limited to 'target/linux/ipq40xx/image')
-rw-r--r--target/linux/ipq40xx/image/Makefile15
1 files changed, 15 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/image/Makefile b/target/linux/ipq40xx/image/Makefile
index 487f3b5638..c19dcb4039 100644
--- a/target/linux/ipq40xx/image/Makefile
+++ b/target/linux/ipq40xx/image/Makefile
@@ -482,6 +482,21 @@ define Device/ezviz_cs-w3-wd1200g-eup
endef
TARGET_DEVICES += ezviz_cs-w3-wd1200g-eup
+define Device/glinet_gl-ap1300
+ $(call Device/FitImage)
+ $(call Device/UbiFit)
+ DEVICE_VENDOR := GL.iNet
+ DEVICE_MODEL := GL-AP1300
+ SOC := qcom-ipq4018
+ DEVICE_DTS_CONFIG := config@ap.dk01.1-c2
+ BLOCKSIZE := 128k
+ PAGESIZE := 2048
+ IMAGE_SIZE := 131072k
+ KERNEL_INSTALL := 1
+ DEVICE_PACKAGES := ipq-wifi-glinet_gl-ap1300
+endef
+TARGET_DEVICES += glinet_gl-ap1300
+
define Device/glinet_gl-b1300
$(call Device/FitImage)
DEVICE_VENDOR := GL.iNet