diff options
| author | Óscar García Amor <ogarcia@connectical.com> | 2022-09-20 13:24:43 +0200 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-11-12 18:15:55 +0100 |
| commit | 62efb34071cff2e15bff85b00040520dad7d6097 (patch) | |
| tree | 8d1ec29454e1c06b1403ae624b57f29d5c4daff8 /target/linux/ipq40xx/files/arch/arm/boot/dts | |
| parent | 18801f26485e3a0dcb79dc9f9b174aed5821b758 (diff) | |
| download | upstream-62efb34071cff2e15bff85b00040520dad7d6097.tar.gz upstream-62efb34071cff2e15bff85b00040520dad7d6097.tar.bz2 upstream-62efb34071cff2e15bff85b00040520dad7d6097.zip | |
ramips: add support for Cudy WR1300 v2
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7603E, MediaTek MT7613BE
- Switch: 1 WAN, 4 LAN (Gigabit)
- Ports: 1 USB 3.0
- Buttons: Reset, WPS
- LEDs: System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS
- Power: DC 12V 1A tip positive
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Recovery:
- Loads only signed manufacture firmware due to bootloader RSA verification
- serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
- connect to any lan ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button for image to
download
- See http://www.cudytech.com/newsinfo/547425.html
Signed-off-by: Óscar García Amor <ogarcia@connectical.com>
Diffstat (limited to 'target/linux/ipq40xx/files/arch/arm/boot/dts')
0 files changed, 0 insertions, 0 deletions