ipq40xx: utilize nvmem-cells for macs & (pre-)calibration data

moves extraction entries out of 11-ath10k-caldata and into
the individual board's device-tree.

Some notes:
 - mmc could work as well (not tested)
 - devices that pass the partitions via mtdparts
   bootargs are kept as is
 - gl-b2200 has a weird pcie wifi device
   (vendor claims 9886 wave 2. But firmware-extraction
   was for a wave 1 device?!)

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

1 files changed, 23 insertions, 14 deletions

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
index 6c97cede7b..ba6aabdc9c 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-cm520-79f.dts
@@ -284,6 +284,25 @@
 				label = "ART";
 				reg = <0xb00000 0x80000>;
 				read-only;
+				compatible = "nvmem-cells";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				precal_art_1000: precal@1000 {
+					reg = <0x1000 0x2f20>;
+				};
+
+				macaddr_art_1006: macaddr@1006 {
+					reg = <0x1006 0x6>;
+				};
+
+				precal_art_5000: precal@5000 {
+					reg = <0x5000 0x2f20>;
+				};
+
+				macaddr_art_5006: macaddr@5006 {
+					reg = <0x5006 0x6>;
+				};
 			};
 
 			partition@b80000 {
@@ -347,24 +366,14 @@
 
 &wifi0 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_1000>;
 	qcom,ath10k-calibration-variant = "CM520-79F";
 };
 
 &wifi1 {
 	status = "okay";
+	nvmem-cell-names = "pre-calibration";
+	nvmem-cells = <&precal_art_5000>;
 	qcom,ath10k-calibration-variant = "CM520-79F";
 };
-
-&art {
-	compatible = "nvmem-cells";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	macaddr_art_1006: macaddr@1006 {
-		reg = <0x1006 0x6>;
-	};
-
-	macaddr_art_5006: macaddr@5006 {
-		reg = <0x5006 0x6>;
-	};
-};