ipq40xx: dts: convert PHY GPIO bindings

Since the new PHY driver manages each PHY individually and therefore 
registers each PHY that is marked with gpio-controller; DT property as a
GPIO controller we need to convert old DT bindings to account for this.

Only 2 boards use this so its not much of an issue.

Signed-off-by: Robert Marko <robert.marko@sartura.hr>

1 files changed, 7 insertions, 5 deletions

diff --git a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
index 28d27d9959..c35ce5ccc4 100644
--- a/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
+++ b/target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4018-ap120c-ac.dts
@@ -37,7 +37,7 @@
 
 		wan {
 			label = "amber:wan";
-			gpios = <&qca8075 19 GPIO_ACTIVE_HIGH>;
+			gpios = <&ethphy4 1 GPIO_ACTIVE_HIGH>;
 		};
 
 		wlan2g {
@@ -119,14 +119,11 @@
 			status = "okay";
 		};
 
-		qca8075: ess-switch@c000000 {
+		ess-switch@c000000 {
 			status = "okay";
 
 			switch_lan_bmp = <0x10>;
 			switch_wan_bmp = <0x20>;
-
-			#gpio-cells = <2>;
-			gpio-controller;
 		};
 
 		edma@c080000 {
@@ -264,6 +261,11 @@
 	status = "okay";
 };
 
+&ethphy4 {
+	gpio-controller;
+	#gpio-cells = <2>;
+};
+
 &gmac0 {
 	qcom,forced_duplex = <1>;
 	qcom,forced_speed = <1000>;