diff options
| author | INAGAKI Hiroshi <musashino.open@gmail.com> | 2019-03-14 23:46:43 +0900 |
|---|---|---|
| committer | Christian Lamparter <chunkeey@gmail.com> | 2019-03-21 00:57:20 +0100 |
| commit | 5c112582974218fd4e4624b36dbdeb8edeff55b7 (patch) | |
| tree | 1e3272497ca44d9bf9803966b3d4a2c959cae3a2 /target/linux/ipq40xx/files-4.19/arch/arm/boot | |
| parent | d2c3eb1e431fa8b1421c3633576781e5d4eede58 (diff) | |
| download | upstream-5c112582974218fd4e4624b36dbdeb8edeff55b7.tar.gz upstream-5c112582974218fd4e4624b36dbdeb8edeff55b7.tar.bz2 upstream-5c112582974218fd4e4624b36dbdeb8edeff55b7.zip | |
ramips: add support for I-O DATA WN-AC733GR3
I-O DATA WN-AC733GR3 is a 2.4/5 GHz band 11ac router, based on
MediaTek MT7620A.
Specification
- SoC : MediaTek MT7620A
- RAM : DDR2 64 MiB
- Flash : SPI-NOR 8 MiB
- WLAN : 2.4/5 GHz
- 2.4 GHz : MT7620A (SoC), 2T2R
- 5 GHz : MT7610E, 1T1R
- Ethernet : 10/100/1000 Mbps (RTL8367RB)
- LED/key : 4x/4x (2x buttons, 1x slide-switch)
- UART : through-hole on PCB
- J1: Vcc, RX, GND, TX from LED side
- 57600n8
Flash instruction using factory image:
1. Boot WN-AC733GR3 normaly
2. Access to "http://192.168.0.1/" and open firmware update page
("ファームウェア")
3. Select the OpenWrt factory image and click update ("更新") button
to perform firmware update
4. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/files-4.19/arch/arm/boot')
0 files changed, 0 insertions, 0 deletions