diff options
| author | Alar Aun <alar.aun@gmail.com> | 2021-04-06 19:38:31 +0300 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-02-01 23:18:58 +0100 |
| commit | 70eedac9b30a06d0d1445bfa31743440ba535e51 (patch) | |
| tree | 8bbb0ec1cf79609680f8c0acb154df2f2d50b280 /target/linux/ipq40xx/base-files | |
| parent | 93d91197b98463277b601ec2653351666a4ca4bd (diff) | |
| download | upstream-70eedac9b30a06d0d1445bfa31743440ba535e51.tar.gz upstream-70eedac9b30a06d0d1445bfa31743440ba535e51.tar.bz2 upstream-70eedac9b30a06d0d1445bfa31743440ba535e51.zip | |
ipq40xx: add MikroTik cAP ac support
This adds support for the MikroTik RouterBOARD RBcAPGi-5acD2nD
(cAP ac), a indoor dual band, dual-radio 802.11ac wireless AP, two
10/100/1000 Mbps Ethernet ports.
See https://mikrotik.com/product/cap_ac for more info.
Specifications:
- SoC: Qualcomm Atheros IPQ4018
- RAM: 128 MB
- Storage: 16 MB NOR
- Wireless:
· Built-in IPQ4018 (SoC) 802.11b/g/n 2x2:2, 2.5 dBi antennae
· Built-in IPQ4018 (SoC) 802.11a/n/ac 2x2:2, 2.5 dBi antennae
- Ethernet: Built-in IPQ4018 (SoC, QCA8075) , 2x 1000/100/10 port,
PoE in and passive PoE out
Unsupported:
- PoE out
Installation:
Boot the initramfs image via TFTP and then flash the sysupgrade
image using "sysupgrade -n"
Signed-off-by: Alar Aun <alar.aun@gmail.com>
Diffstat (limited to 'target/linux/ipq40xx/base-files')
5 files changed, 18 insertions, 0 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/01_leds b/target/linux/ipq40xx/base-files/etc/board.d/01_leds index bc2ec58806..03ee053fcc 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/01_leds +++ b/target/linux/ipq40xx/base-files/etc/board.d/01_leds @@ -52,6 +52,13 @@ engenius,ens620ext) ucidef_set_led_netdev "lan1" "LAN1" "green:lan1" "eth0" ucidef_set_led_netdev "lan2" "LAN2" "green:lan2" "eth1" ;; +mikrotik,cap-ac) + ucidef_set_led_default "power" "POWER" "blue:power" "1" + ucidef_set_led_default "user" "USER" "green:user" "0" + ucidef_set_led_switch "eth1" "ETH1" "green:eth1" "switch0" "0x20" + ucidef_set_led_switch "eth2" "ETH2" "green:eth2" "switch0" "0x10" + ucidef_set_led_wlan "wlan2g" "WLAN2G" "green:wlan2g" "phy0tpt" + ucidef_set_led_wlan "wlan5g" "WLAN5G" "green:wlan5g" "phy1tpt" mikrotik,hap-ac3) ucidef_set_led_netdev "wan" "WAN" "green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "green:lan1" "switch0" "0x10" diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 2b908c800f..c39890ecd9 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -50,6 +50,10 @@ ipq40xx_setup_interfaces() openmesh,a62) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; + mikrotik,cap-ac) + ucidef_add_switch "switch0" \ + "0t@eth0" "4:lan" "5:wan" + ;; asus,rt-ac42u|\ asus,rt-ac58u|\ mikrotik,hap-ac2|\ @@ -190,6 +194,7 @@ ipq40xx_setup_macs() wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr) lan_mac=$(macaddr_add "$wan_mac" 1) ;; + mikrotik,cap-ac |\ mikrotik,hap-ac2|\ mikrotik,hap-ac3) wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base) diff --git a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches index 4036e5356f..5d39d37c08 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ipq40xx/base-files/etc/board.d/03_gpio_switches @@ -18,6 +18,9 @@ cilab,meshpoint-one) compex,wpj428) ucidef_add_gpio_switch "sim_card_select" "SIM card select" "3" "0" ;; +mikrotik,cap-ac) + ucidef_add_gpio_switch "poe_passtrough" "POE passtrough enable" "414" "0" + ;; mikrotik,hap-ac3) ucidef_add_gpio_switch "poe_passtrough" "PoE Passthrough" "452" "0" ;; diff --git a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index c8b1e12ea3..2c56e53f9c 100644 --- a/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ipq40xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -112,6 +112,7 @@ case "$FIRMWARE" in caldata_valid "202f" || caldata_extract "ART" 0x1000 0x2f20 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 2) ;; + mikrotik,cap-ac |\ mikrotik,hap-ac2 |\ mikrotik,hap-ac3) wlan_data="/sys/firmware/mikrotik/hard_config/wlan_data" @@ -190,6 +191,7 @@ case "$FIRMWARE" in caldata_valid "202f" || caldata_extract "ART" 0x5000 0x2f20 ath10k_patch_mac $(macaddr_add $(get_mac_binary "/sys/bus/i2c/devices/0-0050/eeprom" 0x66) 3) ;; + mikrotik,cap-ac |\ mikrotik,hap-ac2 |\ mikrotik,hap-ac3 |\ mikrotik,sxtsq-5-ac) diff --git a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh index b0493e10ba..d0e9b5b020 100644 --- a/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ipq40xx/base-files/lib/upgrade/platform.sh @@ -138,6 +138,7 @@ platform_do_upgrade() { CI_KERNPART="part.safe" nand_do_upgrade "$1" ;; + mikrotik,cap-ac|\ mikrotik,hap-ac2|\ mikrotik,lhgg-60ad|\ mikrotik,sxtsq-5-ac) |