diff options
| author | Mark Mentovai <mark@mentovai.com> | 2021-11-11 12:24:24 -0500 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-10-19 22:58:12 +0200 |
| commit | 9a8e008188a11813a90b77ba32d24c0cca225bf9 (patch) | |
| tree | 31d5b1470953114b8728ce0faa2ef60f38efcdd2 /target/linux/ipq40xx/base-files/etc | |
| parent | 48bb71ff280e2d3cd97c7a48b0d17c209ae6a36c (diff) | |
| download | upstream-9a8e008188a11813a90b77ba32d24c0cca225bf9.tar.gz upstream-9a8e008188a11813a90b77ba32d24c0cca225bf9.tar.bz2 upstream-9a8e008188a11813a90b77ba32d24c0cca225bf9.zip | |
ipq40xx: Convert mikrotik,wap-ac to DSA
As done previously, this preserves the MAC addresses of they physical
Ethernet ports. The interfaces are renamed as eth0 is in use for the
native GMAC; the new interface naming matches the physical port labels.
- sw-eth1 corresponds to the physical port labeled ETH1 and has the
base MAC address. This port can be used to power the device.
- sw-eth2 corresponds to the physical port labeled ETH2 and has a MAC
address one greater than the base.
As this device has 2 physical ports, they are each connected to their
respective PHYs, allowing the link status to be visible to software.
Since they are not marked on the case with any role (such as LAN or
WAN), both are bridged to the lan network by default, although this can
easily be changed if needed.
Signed-off-by: Mark Mentovai <mark@mentovai.com>
Diffstat (limited to 'target/linux/ipq40xx/base-files/etc')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/board.d/02_network | 7 |
1 files changed, 5 insertions, 2 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index 1089a7f3f8..36f1f7c24a 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -52,11 +52,14 @@ ipq40xx_setup_interfaces() cellc,rtl30vw) ucidef_set_interface_lan "lan1 lan2" ;; + compex,wpj428) + ucidef_set_interface_lan "lan1 lan2" + ;; glinet,gl-b1300) ucidef_set_interfaces_lan_wan "lan1 lan2" "wan" ;; - compex,wpj428) - ucidef_set_interface_lan "lan1 lan2" + mikrotik,wap-ac) + ucidef_set_interface_lan "sw-eth1 sw-eth2" ;; zte,mf286d) ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan" |