diff options
| author | Nicholas Smith <nicholas@nbembedded.com> | 2022-03-11 13:54:07 +1000 |
|---|---|---|
| committer | Hauke Mehrtens <hauke@hauke-m.de> | 2022-03-19 20:05:00 +0100 |
| commit | 7ea2f3d6e22b506d137cf255ae73ae498c176d1c (patch) | |
| tree | ea7b28457127d9abdb88c6257582ca2291680b39 /target/linux/ipq40xx/base-files/etc | |
| parent | 42626aef676d2ca1ea1577b7a47ba8e4135f1a4c (diff) | |
| download | upstream-7ea2f3d6e22b506d137cf255ae73ae498c176d1c.tar.gz upstream-7ea2f3d6e22b506d137cf255ae73ae498c176d1c.tar.bz2 upstream-7ea2f3d6e22b506d137cf255ae73ae498c176d1c.zip | |
ipq40xx: add support for Telco X1 Pro
Telco X1 Pro is a Cat12 LTE-A Pro modem router.
Vendor firmware is based on a recent version of OpenWrt.
Flashing is possible via CLI using sysupgrade -F -n
The serial headers allow bootloader and console access
Serial setting: 115200 8N1
Brief Specifications:
IPQ4019 SoC
32MB flash
512MB RAM
4x gigabit LAN
1x gigabit WAN
Dual-band Wave-2 wifi
2x SMA LTE antenna connectors
2x RP-SMA wifi antennas
1x USB 2.0 port
1x Reset button
Serial headers installed
1x Nano SIM tray
1x Quectel EM-12G LTE-A Pro modem
1x M.2 slot attached to USB 3.0
1x internal micro SD card slot
Signed-off-by: Nicholas Smith <nicholas@nbembedded.com>
Diffstat (limited to 'target/linux/ipq40xx/base-files/etc')
| -rw-r--r-- | target/linux/ipq40xx/base-files/etc/board.d/02_network | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/target/linux/ipq40xx/base-files/etc/board.d/02_network b/target/linux/ipq40xx/base-files/etc/board.d/02_network index f0b3adae26..2aa4886e6a 100644 --- a/target/linux/ipq40xx/base-files/etc/board.d/02_network +++ b/target/linux/ipq40xx/base-files/etc/board.d/02_network @@ -139,7 +139,8 @@ ipq40xx_setup_interfaces() ucidef_add_switch "switch0" \ "0u@eth0" "3:lan" "4:lan" "0u@eth1" "5:wan" ;; - unielec,u4019-32m) + unielec,u4019-32m |\ + tel,x1pro) ucidef_set_interfaces_lan_wan "eth0" "eth1" ucidef_add_switch "switch0" \ "0u@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "0u@eth1" "5:wan" |