aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx
diff options
context:
space:
mode:
authorPiotr Dymacz <pepe2k@gmail.com>2021-10-13 14:44:51 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2021-11-03 12:45:40 +0100
commite245ae13eed498891bbca25b961022cb7938ff5c (patch)
tree1acb79bb2a1eb4dfb597215460ffd472d22219e1 /target/linux/imx
parent3c8720f39e8d9a41acf83bfabf35a5f2b59977e0 (diff)
downloadupstream-e245ae13eed498891bbca25b961022cb7938ff5c.tar.gz
upstream-e245ae13eed498891bbca25b961022cb7938ff5c.tar.bz2
upstream-e245ae13eed498891bbca25b961022cb7938ff5c.zip
imx: remove obsolete Kernel 5.4
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
Diffstat (limited to 'target/linux/imx')
-rw-r--r--target/linux/imx/config-5.4420
-rw-r--r--target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch481
-rw-r--r--target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch581
-rw-r--r--target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch434
-rw-r--r--target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch549
-rw-r--r--target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch68
-rw-r--r--target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch57
-rw-r--r--target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch54
-rw-r--r--target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch45
-rw-r--r--target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch76
-rw-r--r--target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch69
-rw-r--r--target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch82
-rw-r--r--target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch33
-rw-r--r--target/linux/imx/patches-5.4/100-bootargs.patch11
-rw-r--r--target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch86
-rw-r--r--target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch76
16 files changed, 0 insertions, 3122 deletions
diff --git a/target/linux/imx/config-5.4 b/target/linux/imx/config-5.4
deleted file mode 100644
index 3e6cf4746a..0000000000
--- a/target/linux/imx/config-5.4
+++ /dev/null
@@ -1,420 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-CONFIG_ARCH_32BIT_OFF_T=y
-CONFIG_ARCH_CLOCKSOURCE_DATA=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_KEEP_MEMBLOCK=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_MMAP_RND_BITS_MAX=15
-CONFIG_ARCH_MULTIPLATFORM=y
-CONFIG_ARCH_MULTI_V6_V7=y
-CONFIG_ARCH_MULTI_V7=y
-CONFIG_ARCH_MXC=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y
-CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARM=y
-CONFIG_ARM_CRYPTO=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_ARM_ERRATA_764369=y
-CONFIG_ARM_ERRATA_775420=y
-CONFIG_ARM_ERRATA_814220=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_HEAVY_MB=y
-# CONFIG_ARM_IMX_CPUFREQ_DT is not set
-CONFIG_ARM_L1_CACHE_SHIFT=6
-CONFIG_ARM_L1_CACHE_SHIFT_6=y
-CONFIG_ARM_PATCH_IDIV=y
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ARM_VIRT_EXT=y
-CONFIG_ASN1=y
-CONFIG_ASSOCIATIVE_ARRAY=y
-CONFIG_ATA=y
-CONFIG_ATAGS=y
-# CONFIG_ATA_SFF is not set
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_PM=y
-CONFIG_BLK_SCSI_REQUEST=y
-CONFIG_CACHE_L2X0=y
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_IMX_GPT=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CLZ_TAB=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPAT_32BIT_TIME=y
-CONFIG_CPUFREQ_DT=y
-CONFIG_CPUFREQ_DT_PLATDEV=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_32v7=y
-CONFIG_CPU_ABRT_EV7=y
-CONFIG_CPU_CACHE_V7=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_ATTR_SET=y
-CONFIG_CPU_FREQ_GOV_COMMON=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_PABRT_V7=y
-CONFIG_CPU_RMAP=y
-CONFIG_CPU_SPECTRE=y
-CONFIG_CPU_THERMAL=y
-CONFIG_CPU_THUMB_CAPABLE=y
-CONFIG_CPU_TLB_V7=y
-CONFIG_CPU_V7=y
-CONFIG_CRC16=y
-CONFIG_CRYPTO_ACOMP2=y
-CONFIG_CRYPTO_AEAD=y
-CONFIG_CRYPTO_AEAD2=y
-CONFIG_CRYPTO_AES_ARM=y
-CONFIG_CRYPTO_AES_ARM_BS=y
-CONFIG_CRYPTO_AKCIPHER=y
-CONFIG_CRYPTO_AKCIPHER2=y
-CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=y
-CONFIG_CRYPTO_AUTHENC=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_CHACHA20=y
-CONFIG_CRYPTO_CHACHA20_NEON=y
-CONFIG_CRYPTO_CRC32=y
-CONFIG_CRYPTO_CRC32C=y
-CONFIG_CRYPTO_CRC32_ARM_CE=y
-CONFIG_CRYPTO_CRYPTD=y
-CONFIG_CRYPTO_CTR=y
-CONFIG_CRYPTO_CTS=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_DEV_FSL_CAAM=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_AHASH_API_DESC=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_COMMON=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_CRYPTO_API_DESC=y
-# CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG is not set
-# CONFIG_CRYPTO_DEV_FSL_CAAM_INTC is not set
-CONFIG_CRYPTO_DEV_FSL_CAAM_JR=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_PKC_API=y
-CONFIG_CRYPTO_DEV_FSL_CAAM_RINGSIZE=9
-CONFIG_CRYPTO_DEV_FSL_CAAM_RNG_API=y
-CONFIG_CRYPTO_DRBG=y
-CONFIG_CRYPTO_DRBG_HMAC=y
-CONFIG_CRYPTO_DRBG_MENU=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_HASH2=y
-CONFIG_CRYPTO_HASH_INFO=y
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_HW=y
-CONFIG_CRYPTO_JITTERENTROPY=y
-CONFIG_CRYPTO_LIB_CHACHA_GENERIC=y
-CONFIG_CRYPTO_LIB_DES=y
-CONFIG_CRYPTO_LIB_SHA256=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_MANAGER=y
-CONFIG_CRYPTO_MANAGER2=y
-CONFIG_CRYPTO_NULL=y
-CONFIG_CRYPTO_NULL2=y
-CONFIG_CRYPTO_RNG=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_RNG_DEFAULT=y
-CONFIG_CRYPTO_RSA=y
-CONFIG_CRYPTO_SEQIV=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA1_ARM=y
-CONFIG_CRYPTO_SHA1_ARM_NEON=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA256_ARM=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_SHA512_ARM=y
-CONFIG_CRYPTO_SIMD=y
-CONFIG_CRYPTO_XTS=y
-CONFIG_CRYPTO_ZSTD=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-CONFIG_DEBUG_MISC=y
-CONFIG_DECOMPRESS_BZIP2=y
-CONFIG_DECOMPRESS_GZIP=y
-CONFIG_DECOMPRESS_LZO=y
-CONFIG_DECOMPRESS_XZ=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DMA_REMAP=y
-CONFIG_DMA_VIRTUAL_CHANNELS=y
-CONFIG_DTC=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_ENCRYPTED_KEYS=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_EXTCON=y
-CONFIG_EXTRA_FIRMWARE="imx/sdma/sdma-imx6q.bin"
-CONFIG_EXTRA_FIRMWARE_DIR="firmware"
-CONFIG_F2FS_FS=y
-# CONFIG_FEC is not set
-CONFIG_FIXED_PHY=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_FS_ENCRYPTION=y
-CONFIG_FS_IOMAP=y
-CONFIG_FS_MBCACHE=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_FW_LOADER_PAGED_BUF=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_ARCH_TOPOLOGY=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_CPU_AUTOPROBE=y
-CONFIG_GENERIC_EARLY_IOREMAP=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IRQ_CHIP=y
-CONFIG_GENERIC_IRQ_MULTI_HANDLER=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_PINCTRL_GROUPS=y
-CONFIG_GENERIC_PINMUX_FUNCTIONS=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GENERIC_TIME_VSYSCALL=y
-# CONFIG_GIANFAR is not set
-CONFIG_GLOB=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_MXC=y
-CONFIG_GRO_CELLS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDEN_BRANCH_PREDICTOR=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-CONFIG_HAVE_SMP=y
-CONFIG_HWMON=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IMX_RNGC=y
-CONFIG_HZ_FIXED=0
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-# CONFIG_I2C_IMX_LPI2C is not set
-CONFIG_IMX2_WDT=y
-# CONFIG_IMX7ULP_WDT is not set
-CONFIG_IMX_DMA=y
-# CONFIG_IMX_GPCV2_PM_DOMAINS is not set
-CONFIG_IMX_IRQSTEER=y
-CONFIG_IMX_SDMA=y
-CONFIG_IMX_THERMAL=y
-# CONFIG_IMX_WEIM is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IO_URING=y
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_WORK=y
-CONFIG_JBD2=y
-# CONFIG_JFFS2_FS is not set
-CONFIG_KEYS=y
-CONFIG_LIBFDT=y
-CONFIG_LOCK_DEBUGGING_SUPPORT=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MDIO_BUS=y
-CONFIG_MDIO_DEVICE=y
-CONFIG_MEMFD_CREATE=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_CACHE_L2X0=y
-CONFIG_MIGRATION=y
-CONFIG_MMC=y
-CONFIG_MMC_BLOCK=y
-CONFIG_MMC_CQHCI=y
-# CONFIG_MMC_MXC is not set
-CONFIG_MMC_SDHCI=y
-# CONFIG_MMC_SDHCI_ESDHC_IMX is not set
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MPILIB=y
-CONFIG_MTD_NAND_CORE=y
-CONFIG_MTD_NAND_ECC_SW_HAMMING=y
-CONFIG_MTD_NAND_GPMI_NAND=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-# CONFIG_MX3_IPU is not set
-CONFIG_MXC_CLK=y
-CONFIG_MXS_DMA=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEON=y
-CONFIG_NET_DEVLINK=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_TAG_DSA=y
-CONFIG_NET_DSA_TAG_EDSA=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NET_SWITCHDEV=y
-CONFIG_NLS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NR_CPUS=4
-CONFIG_NVMEM=y
-# CONFIG_NVMEM_IMX_IIM is not set
-CONFIG_NVMEM_IMX_OCOTP=y
-# CONFIG_NVMEM_SNVS_LPGPR is not set
-CONFIG_NVMEM_SYSFS=y
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_KOBJ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_NET=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_OUTER_CACHE=y
-CONFIG_OUTER_CACHE_SYNC=y
-CONFIG_PADATA=y
-CONFIG_PAGE_OFFSET=0x80000000
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PHYLINK=y
-CONFIG_PINCTRL=y
-CONFIG_PL310_ERRATA_769419=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-CONFIG_PM_OPP=y
-CONFIG_PPS=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-# CONFIG_PWM_IMX1 is not set
-# CONFIG_PWM_IMX27 is not set
-# CONFIG_PWM_IMX_TPM is not set
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RD_BZIP2=y
-CONFIG_RD_GZIP=y
-CONFIG_RD_LZO=y
-CONFIG_RD_XZ=y
-CONFIG_REFCOUNT_FULL=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-# CONFIG_RTC_DRV_IMXDI is not set
-# CONFIG_RTC_DRV_MXC is not set
-# CONFIG_RTC_DRV_MXC_V2 is not set
-CONFIG_RTC_I2C_AND_SPI=y
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_SCSI=y
-# CONFIG_SENSORS_DRIVETEMP is not set
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_MCTRL_GPIO=y
-CONFIG_SGL_ALLOC=y
-CONFIG_SG_POOL=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SOC_BUS=y
-# CONFIG_SOC_IMX50 is not set
-# CONFIG_SOC_IMX51 is not set
-# CONFIG_SOC_IMX53 is not set
-# CONFIG_SOC_IMX6Q is not set
-# CONFIG_SOC_IMX6SL is not set
-# CONFIG_SOC_IMX6SLL is not set
-# CONFIG_SOC_IMX6SX is not set
-# CONFIG_SOC_IMX6UL is not set
-# CONFIG_SOC_IMX7D is not set
-# CONFIG_SOC_IMX7ULP is not set
-# CONFIG_SOC_LS1021A is not set
-# CONFIG_SOC_VF610 is not set
-CONFIG_SPARSE_IRQ=y
-CONFIG_SPI=y
-CONFIG_SPI_BITBANG=y
-# CONFIG_SPI_FSL_LPSPI is not set
-# CONFIG_SPI_FSL_QUADSPI is not set
-CONFIG_SPI_IMX=y
-CONFIG_SPI_MASTER=y
-CONFIG_SRAM=y
-CONFIG_SRAM_EXEC=y
-CONFIG_SRCU=y
-CONFIG_STMP_DEVICE=y
-CONFIG_SWPHY=y
-CONFIG_SWP_EMULATE=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_THERMAL=y
-CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y
-CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0
-CONFIG_THERMAL_GOV_STEP_WISE=y
-CONFIG_THERMAL_OF=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_TIMER_OF=y
-CONFIG_TIMER_PROBE=y
-CONFIG_TREE_RCU=y
-CONFIG_TREE_SRCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UCLAMP_TASK is not set
-CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
-CONFIG_UNWINDER_ARM=y
-CONFIG_USB=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_CHIPIDEA_OF=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_COMMON=y
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_HCD_PLATFORM is not set
-# CONFIG_USB_EHCI_MXC is not set
-CONFIG_USB_GADGET=y
-CONFIG_USB_MXS_PHY=y
-CONFIG_USB_OTG=y
-CONFIG_USB_PHY=y
-CONFIG_USB_ROLE_SWITCH=y
-CONFIG_USB_SUPPORT=y
-CONFIG_USB_ULPI_BUS=y
-CONFIG_USE_OF=y
-CONFIG_VFP=y
-CONFIG_VFPv3=y
-CONFIG_VMSPLIT_2G=y
-# CONFIG_VMSPLIT_3G is not set
-CONFIG_WATCHDOG_CORE=y
-CONFIG_XPS=y
-CONFIG_XXHASH=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZSTD_COMPRESS=y
-CONFIG_ZSTD_DECOMPRESS=y
diff --git a/target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch b/target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch
deleted file mode 100644
index e830897704..0000000000
--- a/target/linux/imx/patches-5.4/001-ARM-dts-imx-Add-GW5907-board-support.patch
+++ /dev/null
@@ -1,481 +0,0 @@
-From 125120298dc05bb55a8874f07aa3f4bb6056bfb3 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:21 -0800
-Subject: [PATCH 1/4] ARM: dts: imx: Add GW5907 board support
-
-The Gateworks GW5907 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - FEC GbE Phy
- - bi-color front-panel LED
- - 256MB NAND boot device
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
- - Digital IO expander (pca9555)
- - Joystick 12bit adc (ads1015)
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Reviewed-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5907.dts | 14 ++
- arch/arm/boot/dts/imx6q-gw5907.dts | 14 ++
- arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 399 ++++++++++++++++++++++++++++++++++
- 4 files changed, 429 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5907.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5907.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5907.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -418,6 +418,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw560x.dtb \
- imx6dl-gw5903.dtb \
- imx6dl-gw5904.dtb \
-+ imx6dl-gw5907.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
- imx6dl-hummingboard-som-v15.dtb \
-@@ -489,6 +490,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw560x.dtb \
- imx6q-gw5903.dtb \
- imx6q-gw5904.dtb \
-+ imx6q-gw5907.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
- imx6q-hummingboard-emmc-som-v15.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5907.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5907.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5907";
-+ compatible = "gw,imx6dl-gw5907", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5907.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5907.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5907";
-+ compatible = "gw,imx6q-gw5907", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
-@@ -0,0 +1,398 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ };
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_otg_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ phy-reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&hdmi {
-+ ddc-i2c-bus = <&i2c3>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ gpio@20 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x20>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ adc@48 {
-+ compatible = "ti,ads1015";
-+ reg = <0x48>;
-+ #address-cells = <1>;
-+ #size-cells = <0>;
-+
-+ channel@4 {
-+ reg = <4>;
-+ ti,gain = <0>;
-+ ti,datarate = <5>;
-+ };
-+
-+ channel@5 {
-+ reg = <5>;
-+ ti,gain = <0>;
-+ ti,datarate = <5>;
-+ };
-+
-+ channel@6 {
-+ reg = <6>;
-+ ti,gain = <0>;
-+ ti,datarate = <5>;
-+ };
-+ };
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-+ status = "disabled";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_otg_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+};
-+
-+&iomuxc {
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart3: uart3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
-+ >;
-+ };
-+};
diff --git a/target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch b/target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch
deleted file mode 100644
index 5c52bde70d..0000000000
--- a/target/linux/imx/patches-5.4/002-ARM-dts-imx-Add-GW5910-board-support.patch
+++ /dev/null
@@ -1,581 +0,0 @@
-From a1fb69366bb16753f0fba6a891fbef5cdd97cfbe Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:22 -0800
-Subject: [PATCH 2/4] ARM: dts: imx: Add GW5910 board support
-
-The Gateworks GW5910 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - FEC GbE RJ45 front-panel
- - 1x miniPCIe socket with PCI Gen2, USB2
- - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
- - 5V to 60V DC input barrel jack
- - 3axis accelerometer (lis2de12)
- - GPS (ublox ZOE-M8Q)
- - bi-color front-panel LED
- - 256MB NAND boot device
- - microSD socket (with UHS-I support)
- - user pushbutton
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
- - Dual-Band Wireless MCU (CC1352, UART/I2S interrconnect to IMX6)
- - WiFi/Bluetooth/BLE module (Sterling-LSW, SDIO/UART interconnect to IMX6)
- - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
- - off-board SPI connector (1x chip-select)
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5910.dts | 14 +
- arch/arm/boot/dts/imx6q-gw5910.dts | 14 +
- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 491 ++++++++++++++++++++++++++++++++++
- 4 files changed, 521 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5910.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5910.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -419,6 +419,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw5903.dtb \
- imx6dl-gw5904.dtb \
- imx6dl-gw5907.dtb \
-+ imx6dl-gw5910.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
- imx6dl-hummingboard-som-v15.dtb \
-@@ -491,6 +492,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw5903.dtb \
- imx6q-gw5904.dtb \
- imx6q-gw5907.dtb \
-+ imx6q-gw5910.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
- imx6q-hummingboard-emmc-som-v15.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5910.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5910.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5910";
-+ compatible = "gw,imx6dl-gw5910", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5910.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5910.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5910";
-+ compatible = "gw,imx6q-gw5910", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-@@ -0,0 +1,489 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-+ };
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_wl: regulator-wl {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_reg_wl>;
-+ compatible = "regulator-fixed";
-+ regulator-name = "wl";
-+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-+ startup-delay-us = <100>;
-+ enable-active-high;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_bt: regulator-bt {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_reg_bt>;
-+ compatible = "regulator-fixed";
-+ regulator-name = "bt";
-+ gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+ startup-delay-us = <100>;
-+ enable-active-high;
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+};
-+
-+
-+&ecspi3 {
-+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi3>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accel@19 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_accel>;
-+ compatible = "st,lis2de12";
-+ reg = <0x19>;
-+ st,drdy-int-pin = <1>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <13 0>;
-+ interrupt-names = "INT1";
-+ };
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+/* off-board RS232 */
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+/* serial console */
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+/* Sterling-LWB Bluetooth */
-+&uart4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart4>;
-+ uart-has-rtscts;
-+ status = "okay";
-+};
-+
-+/* GPS */
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_5p0v>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+/* Sterling-LWB SDIO WiFi */
-+&usdhc2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usdhc2>;
-+ vmmc-supply = <&reg_3p3v>;
-+ non-removable;
-+ bus-width = <4>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-+ vmmc-supply = <&reg_3p3v>;
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+};
-+
-+&iomuxc {
-+ pinctrl_accel: accelmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_ecspi3: escpi3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
-+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
-+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
-+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b1
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_reg_bt: regbtgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_reg_wl: regwlgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart4: uart4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1
-+ MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-+ >;
-+ };
-+
-+ pinctrl_usdhc2: usdhc2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
-+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
-+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
-+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
-+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
-+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x170b9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
-+ >;
-+ };
-+};
diff --git a/target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch b/target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch
deleted file mode 100644
index 32f344c588..0000000000
--- a/target/linux/imx/patches-5.4/003-ARM-dts-imx-Add-GW5913-board-support.patch
+++ /dev/null
@@ -1,434 +0,0 @@
-From 169e12f99cf9d5fce752564f32fd8df96461de43 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:23 -0800
-Subject: [PATCH 3/4] ARM: dts: imx: Add GW5913 board support
-
-The Gateworks GW5913 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - FEC GbE RJ45 front-panel
- - 1x miniPCIe socket with PCI Gen2, USB2
- - 1x miniPCIe socket with PCI Gen2, USB2, nanoSIM
- - 6V to 60V DC input connector
- - GPS (ublox ZOE-M8Q)
- - bi-color front-panel LED
- - 256MB NAND boot device
- - nanoSIM socket
- - user pushbutton
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Reviewed-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5913.dts | 14 ++
- arch/arm/boot/dts/imx6q-gw5913.dts | 14 ++
- arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 348 ++++++++++++++++++++++++++++++++++
- 4 files changed, 378 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5913.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5913.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5913.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -420,6 +420,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw5904.dtb \
- imx6dl-gw5907.dtb \
- imx6dl-gw5910.dtb \
-+ imx6dl-gw5913.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
- imx6dl-hummingboard-som-v15.dtb \
-@@ -493,6 +494,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw5904.dtb \
- imx6q-gw5907.dtb \
- imx6q-gw5910.dtb \
-+ imx6q-gw5913.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
- imx6q-hummingboard-emmc-som-v15.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5913.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5913.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5913";
-+ compatible = "gw,imx6dl-gw5913", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5913.dts
-@@ -0,0 +1,14 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5913.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5913";
-+ compatible = "gw,imx6q-gw5913", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
-@@ -0,0 +1,347 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ };
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x20000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_5p0v: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "5P0V";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-+ status = "disabled";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+};
-+
-+&iomuxc {
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
-+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart3: uart3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
-+ >;
-+ };
-+};
diff --git a/target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch b/target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch
deleted file mode 100644
index da733ff357..0000000000
--- a/target/linux/imx/patches-5.4/004-ARM-dts-imx-Add-GW5912-board-support.patch
+++ /dev/null
@@ -1,549 +0,0 @@
-From 9a820b55817011f53771e6bfebae5fe059f0a534 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Wed, 8 Jan 2020 07:44:24 -0800
-Subject: [PATCH 4/4] ARM: dts: imx: Add GW5912 board support
-
-The Gateworks GW5912 is an IMX6 SoC based single board computer with:
- - IMX6Q or IMX6DL
- - 32bit DDR3 DRAM
- - GbE RJ45 front-panel
- - 4x miniPCIe socket with PCI Gen2, USB2
- - 1x miniPCIe socket with PCI Gen2, USB2, mSATA
- - 1x miniPCIe socket with PCI Gen2, USB2, mezzanine
- - 10V to 60V DC input barrel jack
- - 3axis accelerometer (lis2de12)
- - GPS (ublox ZOE-M8Q)
- - bi-color front-panel LED
- - 256MB NAND boot device
- - nanoSIM/microSD socket (with UHS-I support)
- - user pushbutton
- - Gateworks System Controller (hwmon, pushbutton controller, EEPROM)
- - CAN Bus transceiver (mcp2562)
- - RS232 transceiver (1x UART with flow-control or 2x UART (build option)
- - off-board SPI connector (1x chip-select)
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Reviewed-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/Makefile | 2 +
- arch/arm/boot/dts/imx6dl-gw5912.dts | 13 +
- arch/arm/boot/dts/imx6q-gw5912.dts | 13 +
- arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 461 ++++++++++++++++++++++++++++++++++
- 4 files changed, 489 insertions(+)
- create mode 100644 arch/arm/boot/dts/imx6dl-gw5912.dts
- create mode 100644 arch/arm/boot/dts/imx6q-gw5912.dts
- create mode 100644 arch/arm/boot/dts/imx6qdl-gw5912.dtsi
-
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -420,6 +420,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6dl-gw5904.dtb \
- imx6dl-gw5907.dtb \
- imx6dl-gw5910.dtb \
-+ imx6dl-gw5912.dtb \
- imx6dl-gw5913.dtb \
- imx6dl-hummingboard.dtb \
- imx6dl-hummingboard-emmc-som-v15.dtb \
-@@ -494,6 +495,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
- imx6q-gw5904.dtb \
- imx6q-gw5907.dtb \
- imx6q-gw5910.dtb \
-+ imx6q-gw5912.dtb \
- imx6q-gw5913.dtb \
- imx6q-h100.dtb \
- imx6q-hummingboard.dtb \
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6dl-gw5912.dts
-@@ -0,0 +1,13 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+#include "imx6dl.dtsi"
-+#include "imx6qdl-gw5912.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 DualLite/Solo GW5912";
-+ compatible = "gw,imx6dl-gw5912", "gw,ventana", "fsl,imx6dl";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6q-gw5912.dts
-@@ -0,0 +1,13 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+/dts-v1/;
-+#include "imx6q.dtsi"
-+#include "imx6qdl-gw5912.dtsi"
-+
-+/ {
-+ model = "Gateworks Ventana i.MX6 Dual/Quad GW5912";
-+ compatible = "gw,imx6q-gw5912", "gw,ventana", "fsl,imx6q";
-+};
---- /dev/null
-+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
-@@ -0,0 +1,459 @@
-+// SPDX-License-Identifier: GPL-2.0
-+/*
-+ * Copyright 2019 Gateworks Corporation
-+ */
-+
-+#include <dt-bindings/gpio/gpio.h>
-+
-+/ {
-+ /* these are used by bootloader for disabling nodes */
-+ aliases {
-+ led0 = &led0;
-+ led1 = &led1;
-+ led2 = &led2;
-+ nand = &gpmi;
-+ usb0 = &usbh1;
-+ usb1 = &usbotg;
-+ };
-+
-+ chosen {
-+ stdout-path = &uart2;
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpio_leds>;
-+
-+ led0: user1 {
-+ label = "user1";
-+ gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
-+ default-state = "on";
-+ linux,default-trigger = "heartbeat";
-+ };
-+
-+ led1: user2 {
-+ label = "user2";
-+ gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
-+ };
-+
-+ led2: user3 {
-+ label = "user3";
-+ gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
-+ };
-+ };
-+
-+ memory@10000000 {
-+ device_type = "memory";
-+ reg = <0x10000000 0x40000000>;
-+ };
-+
-+ pps {
-+ compatible = "pps-gpio";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pps>;
-+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-+ };
-+
-+ reg_3p3v: regulator-3p3v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "3P3V";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-always-on;
-+ };
-+
-+ reg_usb_vbus: regulator-5p0v {
-+ compatible = "regulator-fixed";
-+ regulator-name = "usb_vbus";
-+ regulator-min-microvolt = <5000000>;
-+ regulator-max-microvolt = <5000000>;
-+ regulator-always-on;
-+ };
-+};
-+
-+&can1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_flexcan1>;
-+ status = "okay";
-+};
-+
-+&ecspi2 {
-+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_ecspi2>;
-+ status = "okay";
-+};
-+
-+&fec {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_enet>;
-+ phy-mode = "rgmii-id";
-+ status = "okay";
-+};
-+
-+&gpmi {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_gpmi_nand>;
-+ status = "okay";
-+};
-+
-+&i2c1 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c1>;
-+ status = "okay";
-+
-+ gpio@23 {
-+ compatible = "nxp,pca9555";
-+ reg = <0x23>;
-+ gpio-controller;
-+ #gpio-cells = <2>;
-+ };
-+
-+ eeprom@50 {
-+ compatible = "atmel,24c02";
-+ reg = <0x50>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@51 {
-+ compatible = "atmel,24c02";
-+ reg = <0x51>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@52 {
-+ compatible = "atmel,24c02";
-+ reg = <0x52>;
-+ pagesize = <16>;
-+ };
-+
-+ eeprom@53 {
-+ compatible = "atmel,24c02";
-+ reg = <0x53>;
-+ pagesize = <16>;
-+ };
-+
-+ rtc@68 {
-+ compatible = "dallas,ds1672";
-+ reg = <0x68>;
-+ };
-+};
-+
-+&i2c2 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c2>;
-+ status = "okay";
-+};
-+
-+&i2c3 {
-+ clock-frequency = <100000>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_i2c3>;
-+ status = "okay";
-+
-+ accel@19 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_accel>;
-+ compatible = "st,lis2de12";
-+ reg = <0x19>;
-+ st,drdy-int-pin = <1>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <13 0>;
-+ interrupt-names = "INT1";
-+ };
-+};
-+
-+&pcie {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pcie>;
-+ reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>;
-+ status = "okay";
-+};
-+
-+&pwm1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm1>; /* MX6_DIO0 */
-+ status = "disabled";
-+};
-+
-+&pwm2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
-+ status = "disabled";
-+};
-+
-+&pwm3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
-+ status = "disabled";
-+};
-+
-+&pwm4 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_pwm4>; /* MX6_DIO3 */
-+ status = "disabled";
-+};
-+
-+&uart1 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart1>;
-+ rts-gpios = <&gpio7 12 GPIO_ACTIVE_HIGH>;
-+ status = "okay";
-+};
-+
-+&uart2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart2>;
-+ status = "okay";
-+};
-+
-+&uart5 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart5>;
-+ status = "okay";
-+};
-+
-+&usbotg {
-+ vbus-supply = <&reg_usb_vbus>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ dr_mode = "host";
-+ status = "okay";
-+};
-+
-+&usbh1 {
-+ vbus-supply = <&reg_usb_vbus>;
-+ status = "okay";
-+};
-+
-+&usdhc3 {
-+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
-+ pinctrl-0 = <&pinctrl_usdhc3>;
-+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
-+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
-+ cd-gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
-+ vmmc-supply = <&reg_3p3v>;
-+ no-1-8-v; /* firmware will remove if board revision supports */
-+ status = "okay";
-+};
-+
-+&wdog1 {
-+ status = "disabled";
-+};
-+
-+&wdog2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_wdog>;
-+ fsl,ext-reset-output;
-+ status = "okay";
-+};
-+
-+&iomuxc {
-+ pinctrl_accel: accelmuxgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_enet: enetgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
-+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
-+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
-+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
-+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
-+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
-+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
-+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
-+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
-+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
-+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
-+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
-+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
-+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
-+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_ecspi2: escpi2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
-+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
-+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
-+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x100b1
-+ >;
-+ };
-+
-+ pinctrl_flexcan1: flexcan1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
-+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x4001b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpio_leds: gpioledsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
-+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_gpmi_nand: gpminandgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-+ MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
-+ MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
-+ MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
-+ MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
-+ MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
-+ MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
-+ MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
-+ MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
-+ MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
-+ MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
-+ MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
-+ MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
-+ MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
-+ MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
-+ >;
-+ };
-+
-+ pinctrl_i2c1: i2c1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
-+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
-+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x0001b0b0
-+ >;
-+ };
-+
-+ pinctrl_i2c2: i2c2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
-+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_i2c3: i2c3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
-+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
-+ >;
-+ };
-+
-+ pinctrl_pcie: pciegrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0
-+ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_pps: ppsgrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm1: pwm1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm2: pwm2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm3: pwm3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_pwm4: pwm4grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT2__PWM4_OUT 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart1: uart1grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x4001b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart2: uart2grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x4001b0b1
-+ >;
-+ };
-+
-+ pinctrl_uart5: uart5grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
-+ >;
-+ };
-+
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x13059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3: usdhc3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x17059 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x17059
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_100mhz: usdhc3grp100mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170b9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170b9
-+ >;
-+ };
-+
-+ pinctrl_usdhc3_200mhz: usdhc3grp200mhz {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
-+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
-+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
-+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
-+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
-+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
-+ MX6QDL_PAD_SD3_DAT5__GPIO7_IO00 0x170f9 /* CD */
-+ MX6QDL_PAD_NANDF_CS1__SD3_VSELECT 0x170f9
-+ >;
-+ };
-+
-+ pinctrl_wdog: wdoggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT3__WDOG2_B 0x1b0b0
-+ >;
-+ };
-+};
diff --git a/target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch
deleted file mode 100644
index f05c1f1ec1..0000000000
--- a/target/linux/imx/patches-5.4/005-v5.7-ARM-dts-imx6qdl-gw553x-add-lsm9ds1-iio-imu-magn-supp.patch
+++ /dev/null
@@ -1,68 +0,0 @@
-From 62e7f0b553038e3a1a1b2b067dd1fbdacd634e37 Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Fri, 14 Feb 2020 13:02:41 -0800
-Subject: [PATCH] ARM: dts: imx6qdl-gw553x: add lsm9ds1 iio imu/magn support
-
-Add one node for the accel/gyro i2c device and another for the separate
-magnetometer device in the lsm9ds1.
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
-@@ -173,6 +173,25 @@
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
-+ magn@1c {
-+ compatible = "st,lsm9ds1-magn";
-+ reg = <0x1c>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_mag>;
-+ interrupt-parent = <&gpio1>;
-+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
-+ };
-+
-+ imu@6a {
-+ compatible = "st,lsm9ds1-imu";
-+ reg = <0x6a>;
-+ st,drdy-int-pin = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_imu>;
-+ interrupt-parent = <&gpio7>;
-+ interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
- ltc3676: pmic@3c {
- compatible = "lltc,ltc3676";
- reg = <0x3c>;
-@@ -426,6 +445,12 @@
- >;
- };
-
-+ pinctrl_imu: imugrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x1b0b0
-+ >;
-+ };
-+
- pinctrl_ipu1_csi0: ipu1csi0grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
-@@ -449,6 +474,12 @@
- >;
- };
-
-+ pinctrl_mag: maggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
-+ >;
-+ };
-+
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
diff --git a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch b/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch
deleted file mode 100644
index 1d8844fb0d..0000000000
--- a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx-ventana-add-fxos8700-on-gateworks-boards.patch
+++ /dev/null
@@ -1,57 +0,0 @@
-From 66d19a4f8d0fa7539f90cad64d793b4dac6f6e5d Mon Sep 17 00:00:00 2001
-From: Robert Jones <rjones@gateworks.com>
-Date: Fri, 14 Feb 2020 13:01:55 -0800
-Subject: [PATCH] ARM: dts: imx: ventana: add fxos8700 on gateworks boards
-
-Add fxos8700 iio imu entries for Gateworks ventana SBCs.
-
-Signed-off-by: Robert Jones <rjones@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 5 +++++
- arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 5 +++++
- arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 5 +++++
- 3 files changed, 15 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
-@@ -313,6 +313,11 @@
- interrupts = <12 2>;
- wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
- };
-+
-+ accel@1e {
-+ compatible = "nxp,fxos8700";
-+ reg = <0x1e>;
-+ };
- };
-
- &ldb {
---- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
-@@ -304,6 +304,11 @@
- interrupts = <11 2>;
- wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
- };
-+
-+ accel@1e {
-+ compatible = "nxp,fxos8700";
-+ reg = <0x1e>;
-+ };
- };
-
- &ldb {
---- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
-@@ -361,6 +361,11 @@
- interrupts = <12 2>;
- wakeup-gpios = <&gpio7 12 GPIO_ACTIVE_LOW>;
- };
-+
-+ accel@1e {
-+ compatible = "nxp,fxos8700";
-+ reg = <0x1e>;
-+ };
- };
-
- &ldb {
diff --git a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch b/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch
deleted file mode 100644
index 72a98a2b15..0000000000
--- a/target/linux/imx/patches-5.4/006-v5.7-ARM-dts-imx6qdl-gw5910-add-CC1352-UART.patch
+++ /dev/null
@@ -1,54 +0,0 @@
-From d2cf2f91ba5b6d7696b1870e28017a3e1a7a1bb8 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Fri, 28 Feb 2020 11:46:07 -0800
-Subject: [PATCH] ARM: dts: imx6qdl-gw5910: add CC1352 UART
-
-The GW5910-C revision adds a TI CC1352 connected to IMX UART4
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 25 +++++++++++++++++++++++++
- 1 file changed, 25 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-@@ -218,6 +218,14 @@
- status = "okay";
- };
-
-+/* cc1352 */
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_uart3>;
-+ uart-has-rtscts;
-+ status = "okay";
-+};
-+
- /* Sterling-LWB Bluetooth */
- &uart4 {
- pinctrl-names = "default";
-@@ -409,6 +417,23 @@
- >;
- };
-
-+ pinctrl_uart3: uart3grp {
-+ fsl,pins = <
-+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
-+ MX6QDL_PAD_EIM_D23__UART3_RTS_B 0x1b0b1
-+ MX6QDL_PAD_EIM_D31__UART3_CTS_B 0x1b0b1
-+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x4001b0b1 /* DIO20 */
-+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x4001b0b1 /* DIO14 */
-+ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x4001b0b1 /* DIO15 */
-+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b1 /* TMS */
-+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b1 /* TCK */
-+ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b1 /* TDO */
-+ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b1 /* TDI */
-+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x4001b0b1 /* RST# */
-+ >;
-+ };
-+
- pinctrl_uart4: uart4grp {
- fsl,pins = <
- MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
diff --git a/target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch b/target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch
deleted file mode 100644
index 8d436be631..0000000000
--- a/target/linux/imx/patches-5.4/006-v5.8-ARM-dts-imx6qdl-gw552x-add-USB-OTG-support.patch
+++ /dev/null
@@ -1,45 +0,0 @@
-From 957743b79b1ebb710f5498b61a212cebc302e685 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Wed, 29 Apr 2020 08:22:35 -0700
-Subject: [PATCH 01/20] ARM: dts: imx6qdl-gw552x: add USB OTG support
-
-The GW552x-B board revision adds USB OTG support.
-
-Enable the device-tree node and configure the OTG_ID pin.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 14 ++++++++++++++
- 1 file changed, 14 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
-@@ -258,6 +258,14 @@
- status = "okay";
- };
-
-+&usbotg {
-+ vbus-supply = <&reg_5p0v>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_usbotg>;
-+ disable-over-current;
-+ status = "okay";
-+};
-+
- &wdog1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_wdog>;
-@@ -359,6 +367,12 @@
- >;
- };
-
-+ pinctrl_usbotg: usbotggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x13059
-+ >;
-+ };
-+
- pinctrl_wdog: wdoggrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
diff --git a/target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch
deleted file mode 100644
index 537b6f4d67..0000000000
--- a/target/linux/imx/patches-5.4/007-v5.8-ARM-dts-imx6qdl-gw560x-add-lsm9ds1-iio-imu-magn-supp.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-From 9e72702a3d9a967edac02d8e937bce2b68b77814 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 12 May 2020 13:59:37 -0700
-Subject: [PATCH 05/20] ARM: dts: imx6qdl-gw560x: add lsm9ds1 iio imu/magn
- support
-
-Add one node for the accel/gyro i2c device and another for the separate
-magnetometer device in the lsm9ds1.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
-@@ -295,6 +295,15 @@
- VDDIO-supply = <&reg_3p3v>;
- };
-
-+ magn@1c {
-+ compatible = "st,lsm9ds1-magn";
-+ reg = <0x1c>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_mag>;
-+ interrupt-parent = <&gpio5>;
-+ interrupts = <9 IRQ_TYPE_EDGE_RISING>;
-+ };
-+
- tca8418: keypad@34 {
- compatible = "ti,tca8418";
- pinctrl-names = "default";
-@@ -389,6 +398,16 @@
- };
- };
- };
-+
-+ imu@6a {
-+ compatible = "st,lsm9ds1-imu";
-+ reg = <0x6a>;
-+ st,drdy-int-pin = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_imu>;
-+ interrupt-parent = <&gpio5>;
-+ interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
-+ };
- };
-
- &i2c3 {
-@@ -609,6 +628,12 @@
- >;
- };
-
-+ pinctrl_imu: imugrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x1b0b0
-+ >;
-+ };
-+
- pinctrl_keypad: keypadgrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x0001b0b0 /* KEYPAD_IRQ# */
-@@ -616,6 +641,12 @@
- >;
- };
-
-+ pinctrl_mag: maggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
-+ >;
-+ };
-+
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0 /* PCI_RST# */
diff --git a/target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch b/target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch
deleted file mode 100644
index 4d24b40535..0000000000
--- a/target/linux/imx/patches-5.4/008-v5.8-ARM-dts-imx6qdl-gw5904-add-lsm9ds1-iio-imu-magn-supp.patch
+++ /dev/null
@@ -1,69 +0,0 @@
-From c8756cbad816954be912ba32277ccd55fe7acc01 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 12 May 2020 13:59:56 -0700
-Subject: [PATCH 06/20] ARM: dts: imx6qdl-gw5904: add lsm9ds1 iio imu/magn
- support
-
-Add one node for the accel/gyro i2c device and another for the separate
-magnetometer device in the lsm9ds1.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 31 +++++++++++++++++++++++++++++++
- 1 file changed, 31 insertions(+)
-
---- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
-@@ -248,6 +248,15 @@
- pinctrl-0 = <&pinctrl_i2c2>;
- status = "okay";
-
-+ magn@1c {
-+ compatible = "st,lsm9ds1-magn";
-+ reg = <0x1c>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_mag>;
-+ interrupt-parent = <&gpio5>;
-+ interrupts = <17 IRQ_TYPE_EDGE_RISING>;
-+ };
-+
- ltc3676: pmic@3c {
- compatible = "lltc,ltc3676";
- reg = <0x3c>;
-@@ -320,6 +329,16 @@
- };
- };
- };
-+
-+ imu@6a {
-+ compatible = "st,lsm9ds1-imu";
-+ reg = <0x6a>;
-+ st,drdy-int-pin = <1>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&pinctrl_imu>;
-+ interrupt-parent = <&gpio4>;
-+ interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
-+ };
- };
-
- &i2c3 {
-@@ -501,6 +520,18 @@
- >;
- };
-
-+ pinctrl_imu: imugrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0
-+ >;
-+ };
-+
-+ pinctrl_mag: maggrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0
-+ >;
-+ };
-+
- pinctrl_pcie: pciegrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
diff --git a/target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch b/target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch
deleted file mode 100644
index 545a6fddd5..0000000000
--- a/target/linux/imx/patches-5.4/009-v5.8-ARM-dts-imx6qdl-gw5910-add-support-for-bcm4330-bt.patch
+++ /dev/null
@@ -1,82 +0,0 @@
-From d40edafe80569c5b4d8893c1cdd1060c54ef433c Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 12 May 2020 14:54:15 -0700
-Subject: [PATCH 07/20] ARM: dts: imx6qdl-gw5910: add support for bcm4330-bt
-
-The Sterling-LWB has a BCM4330 which has a UART based bluetooth
-HCI. Add support for binding to the bcm_hci driver to take care
-of handling the shutdown gpio and loading firmware.
-
-Because the shutdown gpio is more of an enable than a regulator
-go ahead and replace the regulator with a shutdown-gpio.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 32 ++++++++++++--------------------
- 1 file changed, 12 insertions(+), 20 deletions(-)
-
---- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-@@ -81,19 +81,6 @@
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
--
-- reg_bt: regulator-bt {
-- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_reg_bt>;
-- compatible = "regulator-fixed";
-- regulator-name = "bt";
-- gpio = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-- startup-delay-us = <100>;
-- enable-active-high;
-- regulator-min-microvolt = <3300000>;
-- regulator-max-microvolt = <3300000>;
-- regulator-always-on;
-- };
- };
-
-
-@@ -229,9 +216,14 @@
- /* Sterling-LWB Bluetooth */
- &uart4 {
- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_uart4>;
-+ pinctrl-0 = <&pinctrl_uart4>,<&pinctrl_bten>;
- uart-has-rtscts;
- status = "okay";
-+
-+ bluetooth {
-+ compatible = "brcm,bcm4330-bt";
-+ shutdown-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-+ };
- };
-
- /* GPS */
-@@ -286,6 +278,12 @@
- >;
- };
-
-+ pinctrl_bten: btengrp {
-+ fsl,pins = <
-+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
-+ >;
-+ };
-+
- pinctrl_ecspi3: escpi3grp {
- fsl,pins = <
- MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
-@@ -391,12 +389,6 @@
- >;
- };
-
-- pinctrl_reg_bt: regbtgrp {
-- fsl,pins = <
-- MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
-- >;
-- };
--
- pinctrl_reg_wl: regwlgrp {
- fsl,pins = <
- MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b1
diff --git a/target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch b/target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch
deleted file mode 100644
index ce2fa2ee90..0000000000
--- a/target/linux/imx/patches-5.4/010-v5.8-ARM-dts-imx6qdl-gw5910-fix-wlan-regulator.patch
+++ /dev/null
@@ -1,33 +0,0 @@
-From 4792ff641cc8993606013d27d84cda59d8cc76c5 Mon Sep 17 00:00:00 2001
-From: Tim Harvey <tharvey@gateworks.com>
-Date: Tue, 12 May 2020 15:02:34 -0700
-Subject: [PATCH 08/20] ARM: dts: imx6qdl-gw5910: fix wlan regulator
-
-Connect the wl_reg regulator to usdhc2 such that it can be enabled
-and disabled as needed. There is no need for this to be always-on.
-
-Signed-off-by: Tim Harvey <tharvey@gateworks.com>
-Signed-off-by: Shawn Guo <shawnguo@kernel.org>
----
- arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 3 +--
- 1 file changed, 1 insertion(+), 2 deletions(-)
-
---- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
-@@ -79,7 +79,6 @@
- enable-active-high;
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
-- regulator-always-on;
- };
- };
-
-@@ -249,7 +248,7 @@
- &usdhc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_usdhc2>;
-- vmmc-supply = <&reg_3p3v>;
-+ vmmc-supply = <&reg_wl>;
- non-removable;
- bus-width = <4>;
- status = "okay";
diff --git a/target/linux/imx/patches-5.4/100-bootargs.patch b/target/linux/imx/patches-5.4/100-bootargs.patch
deleted file mode 100644
index cf63a3bdb1..0000000000
--- a/target/linux/imx/patches-5.4/100-bootargs.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/boot/dts/imx6dl-wandboard.dts
-+++ b/arch/arm/boot/dts/imx6dl-wandboard.dts
-@@ -16,4 +16,8 @@
- device_type = "memory";
- reg = <0x10000000 0x40000000>;
- };
-+
-+ chosen {
-+ bootargs = "console=ttymxc0,115200";
-+ };
- };
diff --git a/target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch b/target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch
deleted file mode 100644
index bae9df1734..0000000000
--- a/target/linux/imx/patches-5.4/301-apalis-ixora-dts-leds.patch
+++ /dev/null
@@ -1,86 +0,0 @@
-arm: dts: apalis-ixora: Add status LEDs aliases
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-@@ -60,6 +60,10 @@
- i2c2 = &i2c2;
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
-+ led-boot = &led_boot;
-+ led-failsafe = &led_failsafe;
-+ led-running = &led_running;
-+ led-upgrade = &led_upgrade;
- };
-
- chosen {
-@@ -127,22 +131,22 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds_ixora>;
-
-- led4-green {
-+ led_running: led4-green {
- label = "LED_4_GREEN";
- gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- };
-
-- led4-red {
-+ led_upgrade: led4-red {
- label = "LED_4_RED";
- gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-green {
-+ led_boot: led5-green {
- label = "LED_5_GREEN";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-red {
-+ led_failsafe: led5-red {
- label = "LED_5_RED";
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- };
---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-@@ -61,6 +61,10 @@
- i2c2 = &i2c2;
- rtc0 = &rtc_i2c;
- rtc1 = &snvs_rtc;
-+ led-boot = &led_boot;
-+ led-failsafe = &led_failsafe;
-+ led-running = &led_running;
-+ led-upgrade = &led_upgrade;
- };
-
- chosen {
-@@ -128,22 +132,22 @@
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_leds_ixora>;
-
-- led4-green {
-+ led_running: led4-green {
- label = "LED_4_GREEN";
-- gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>;
-+ gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
- };
-
-- led4-red {
-+ led_upgrade: led4-red {
- label = "LED_4_RED";
-- gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>;
-+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-green {
-+ led_boot: led5-green {
- label = "LED_5_GREEN";
- gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
- };
-
-- led5-red {
-+ led_failsafe: led5-red {
- label = "LED_5_RED";
- gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
- };
diff --git a/target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch b/target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch
deleted file mode 100644
index f5afb66371..0000000000
--- a/target/linux/imx/patches-5.4/302-apalis-ixora-dts-reset-button.patch
+++ /dev/null
@@ -1,76 +0,0 @@
-arm: dts: apalis-ixora: Add switch3 as reset button
-
-Signed-off-by: Petr Štetiar <ynezz@true.cz>
-
---- a/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
-@@ -74,7 +74,7 @@
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_gpio_keys>;
-+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>;
-
- wakeup {
- label = "Wake-Up";
-@@ -83,6 +83,13 @@
- debounce-interval = <10>;
- wakeup-source;
- };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <10>;
-+ };
- };
-
- lcd_display: disp0 {
-@@ -298,4 +305,10 @@
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- >;
- };
-+
-+ pinctrl_switch3_ixora: switch3ixora {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-+ >;
-+ };
- };
---- a/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-+++ b/arch/arm/boot/dts/imx6q-apalis-ixora.dts
-@@ -73,7 +73,7 @@
- gpio-keys {
- compatible = "gpio-keys";
- pinctrl-names = "default";
-- pinctrl-0 = <&pinctrl_gpio_keys>;
-+ pinctrl-0 = <&pinctrl_gpio_keys &pinctrl_switch3_ixora>;
-
- wakeup {
- label = "Wake-Up";
-@@ -82,6 +82,13 @@
- debounce-interval = <10>;
- wakeup-source;
- };
-+
-+ reset {
-+ label = "reset";
-+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <10>;
-+ };
- };
-
- lcd_display: disp0 {
-@@ -299,4 +306,10 @@
- MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x1b0b0
- >;
- };
-+
-+ pinctrl_switch3_ixora: switch3ixora {
-+ fsl,pins = <
-+ MX6QDL_PAD_SD1_DAT0__GPIO1_IO16 0x1b0b0
-+ >;
-+ };
- };